Merge origin/main (00429da739) into belt-printer.
Conflicts resolved:
- src/CMakeLists.txt: keep both wxInspector workarounds.
- GCodeProcessor.cpp: keep the belt compare_pos / z_for_height lines.
- PrintObjectSlice.cpp: the belt bbox-Z guard also covers main's
printable_region_ids bookkeeping.
- TreeSupport.cpp: the belt-floor check runs before main's PendingNode
queueing.
- Tab.hpp: keep the belt fields, drop the removed upload description
fields.
- tests/libslic3r/CMakeLists.txt: keep both test files.
Also included:
- eSUN PLA belt presets declare their own filament_id (OFkrxQC4) and
scripts/filament_id_snapshot.json is regenerated, as main's filament_id
check requires.
- Custom.json version bumped to 02.04.00.05 so the belt entries reach
existing installs.
- Fix the ambiguous WithinRel call in the belt apron width test, which
otherwise breaks the fff_print build.
* Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill
For patterns with curved/turning anchor lines (Hilbert Curve, Octagram
Spiral), the bridge_over_infill algorithm produced incorrect results:
1. determine_bridging_angle: sampling curved anchor orientations
produced noise across all turning directions (0/90/180/270°)
instead of a single dominant one, yielding unstable bridge angles
with 180° spread. Fix: use the configured infill_direction + 90°
directly, bypassing the noisy sampling. The old blind +0.25*PI
(Hilbert) and +1/16*PI (Octagram) offsets are removed.
2. construct_anchored_polygon: curved Hilbert/Octagram anchors
intersected each vertical scan line many times at wildly different
Y positions, producing chaotic polygon sections — holes in random
places, bridges over air, rotated bridges. Fix: replace the curved
infill polylines with synthetic straight lines parallel to
infill_direction, spaced at the real infill line spacing
(flow_spacing / density). Lines are centered on the limiting_area
bbox center so that after rotation they span the full bridged_area.
Anchors are left at full bbox length (not clipped) to guarantee
every scan line finds an anchor.
Rectilinear and other straight-line patterns are unaffected.
Known limitation: some bridge edges may still terminate over air in
edge cases where the nearest synthetic anchor line is more than one
infill spacing away from the bridge boundary. This will be addressed
in a follow-up.
* fix: anchor internal bridges to actual sparse infill
Preserve real anchors across regions and align plane-path anchor origins with printed infill. Respect lower-layer rotation templates and model alignment, and sample curved bridge boundaries more finely.
Add regression coverage for anchor alignment, bridge angles and region isolation, with Orca comments explaining the geometry constraints. Verified 175 FFF tests before the comment-only follow-up; preserve CRLF in modified files.
* Fix internal bridge support contacts and separated infill origins
Restore anchor contact after bridge smoothing and share per-body pattern origins between anchors and printed infill. Recompute origins when preparation settings change.
Cover multiline counts 1, 2 and 3 and add regressions for printed bridge support, separated infill alignment and reslicing.
* Add explicit standard headers to PrintObject tests
* test: cover surface centering when infill settings change
Verify top and bottom Archimedean Chords and Octagram Spiral paths after switching centering modes or toggling separated infills. Compare reslicing against fresh slicing and document dependent infill invalidation.
* test: preserve directional surface infill when settings change
* perf: index layer islands for connected-body detection
* test: use public print pipeline for body centering checks
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
- Emit coincident belt_brim_by_layer bands even when the leading object layer
has no InstanceVisit (zero-extrusion lead-in / no coinciding support), so the
brim at first belt contact is no longer dropped.
- Register each coincident band's brim filament in ToolOrdering and emit each
band exactly once, in its brim-filament pass; emit ordinary-layer aprons in
the brim pass before object extrusion (correct tool, brim-first) instead of
with whatever tool was active.
- has_belt_brim(): inner-only brims need brim_width>0 (leading/extra produce no
inner geometry), fixing spurious prime-tower/spiral rejection; mirror in
wants_brim. Single-extruder/single-object output is unchanged except
previously-dropped bands now print.
Six issues found by reviewing the previous commit against belt-printer, two of
them release-blocking.
Data race (high). Print::process() runs generate_support_material() for all
objects in a tbb::parallel_for, and make_belt_brim() runs at its tail, but
belt_brim_obstacles() read every OTHER object's support_layers() - which a
concurrent task may be inside clear_support_layers() deleting. That is a
use-after-free, and even when it survives, the obstacle set depends on which
object finishes first. Only this object's own supports are consulted now; they
are complete at that point. Foreign objects still contribute their slices,
which are finished and immutable before the support phase.
Apron bands dropped (high), two separate causes. An apron band prints below
its own object's first layer, but another object can already be printing at
that print_z, in which case process_layer() takes the ordinary path and never
emitted the band - the emission is now shared by both paths. Separately, a
band whose print_z matched a support layer of the SAME object was overwritten
in the print-wide merge, which keeps one record per object per z and could not
detect the collision because LayerToPrint::layer() is null for a band. The
per-object pairing loop is now a three-way merge over object, support and apron
streams, so each object contributes at most one record per z.
Multi-instance was far too strict (medium). It refused belt brim for every
multi-instance object, killing plain brim width and inner brim too, and only
warned when a leading length was set. Only movement ALONG the belt changes an
instance's belt-floor Z, so copies side by side ACROSS the belt share one set of
bands perfectly well; belt_brim_instances_compatible() now tests just that, and
the warning fires whenever the brim is actually suppressed.
Apron layer bookkeeping (medium). Apron layers count toward m_layer_count and
advance m_layer_index, but emitted no Z/height tags, left m_last_layer_z,
m_max_layer_z and m_last_height stale - so the first object layer computed its
height against a pre-apron Z - and skipped before_layer_change_gcode and
layer_change_gcode entirely. All of that now matches the ordinary path.
Obstacle cost (low). belt_brim_obstacles() ran a full-plate union per band.
A bounding-box pre-filter drops non-overlapping objects before materialising any
polygon, and the union is skipped for trivial inputs.
Deliberately unchanged: every apron band still reports cooling layer_id 0.
CoolingBuffer uses it for the initial_layer_fan_speed override and the
close_fan_the_first_x_layers gate, and every band lies on the belt plane itself,
so it is all first-layer material by the only definition that means anything on
a belt. Numbering the bands would ramp the fan up while still printing on the
belt. Now documented at the assignment rather than left implicit.
A belt printer slices in a rotated frame, so the belt surface is a tilted
plane rather than the Z=0 bed plane. Each slicing layer touches the belt
only along a narrow strip at its leading edge - about 0.2mm at 45 degrees -
so a part's first layer is really a first line, with almost no contact patch
to hold it down while the belt drags it forward. Brim was hard-disabled on
belt printers, leaving no remedy at all.
Generate the brim on the belt plane instead. The object's belt footprint is
the union over layers of each slice clipped to that layer's contact band; the
brim is offset from it in a "flattened" frame where the shear axis is
stretched by 1/cos(tilt), so ordinary Clipper offsets measure true on-belt
distance. It is emitted as cross-belt lines, one per layer band, anchored to
a fixed fraction of the band so every line shares a nozzle-to-belt clearance
and therefore comes out the same width; flow is matched to the resulting band
pitch, keeping the sheet uniform and gap-free.
Three new controls, all belt-only:
* Leading brim length - extends the brim ahead of the part along the belt,
on every downhill-facing edge of its contact area. This apron necessarily
prints BELOW the object's first layer, since layer 0 is the part's leading
contact, so it needs brim-only bands of its own.
* Extra brim width - widens the brim sideways across the belt only.
* Brim type "Leading edge only" - brim at the part's first belt contact and
nothing after it. Appended last in BrimType so no existing value shifts;
degrades to an outer brim off belt printers, with a warning.
The apron bands are lightweight records rather than a Layer subclass, so no
fabricated Layer::id() can leak into initial-layer temperature selection, the
spiral vase probe, cooling or gradual interpolation. They are generated in
posSupportMaterial because their print_z values must exist before ToolOrdering
is built at psWipeTower, and they are emitted from a short dedicated branch in
process_layer that runs before any layer pointer is dereferenced.
The footprint is closed before offsetting outwards: a belt contact patch is
often a broken-up strip, and the merged offset rings of two islands closer
than 2 x brim_width would otherwise fill the space between them - space that
lies under the part.
Also fixes a pre-existing bug where PrintObject::get_first_layer_bbox()
overwrote a valid bbox with an unassigned one on any belt printer with a brim
configured, because has_brim() was true while make_brim() returned early.
Belt brim is refused alongside the prime tower and spiral vase, and requires
one instance per PrintObject - translating an instance along the belt axis
changes its physical belt-floor Z. Untilted belt printers are unchanged: they
still get no brim, since the plate brim is emitted out of skirt_brim_groups(),
which _make_skirt() never builds for a belt printer.
Brings the belt-printer work up to date with 591 upstream commits.
Conflict resolutions (12 files, 42 hunks):
- GCode.cpp: adopted upstream's per-filament/per-nozzle config refactor
(get_filament_config_index, NOZZLE_CONFIG), the extracted
generate_timelapse_gcode + farthest-point timelapse, and the
ConfigOptionFloatsNullable calibration options. Re-applied the belt
hooks on top: init_belt_writer / axis remap / FirstLayerPlane setup,
on_set_origin, the belt-corrected calib_z for the volumetric speed
tower, and path_on_first_layer (belt's per-path first-layer test) in
place of upstream's layer-index on_first_layer() in the acceleration,
jerk and overhang-detection paths. Swept upstream's new m_writer.
uses to m_writer-> since belt holds the writer by unique_ptr.
- interpolate_value_across_layers: kept upstream's banded stepping and
belt's object-Z-span ratio; dropped upstream's duplicate ratio decl.
- Plater.cpp: took upstream's guarded add_model(...) early-returns and
the VFA vfa_layer_height plumbing; kept the belt temp-tower path,
_calib_apply_belt_mode and belt_calib_flip_ringing_tower. Dropped the
VFA "cut upper" block, superseded upstream by model scaling.
- Brim.cpp: upstream's ObjectInstanceID-keyed brimAreaMap, keeping the
belt early-return.
- 3DScene.cpp: kept both the belt build-plate tilt up_direction and
upstream's per-extruder printable-height shading.
- GCodeViewer.cpp: kept upstream's dim-previous-layers setup and belt's
exemption from the same-result early return.
- TreeSupport.cpp: upstream's >= 0 roof-layer fix inside belt's
belt-floor branch.
- calib.cpp / GCode.hpp / GCodeWriter.{cpp,hpp} / Print.hpp: upstream's
additions adapted to belt's pointer-held writer and helpers.
- Custom.json: kept profile version 02.04.00.03 (belt) over upstream's
02.04.00.01; both bumped from 02.04.00.00.
Building this tree needs the wxInspector dependency, which upstream
added in the interim (python3 and wxWidgets 3.3.2 were already present
in the shared deps prefix).
* ENH: config: add logic to apply params to object/region config with multi-extruder
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
(cherry picked from commit 3179fd416e68ca8bc2d746f859508d07db18fe5b)
* FIX: X1C switch to H2D lose Highflow parameter
Jira: STUDIO-15272
Change-Id: Id8cf5d93a49d5542ac82f9554974b458e15c1193
(cherry picked from commit 15d9f072ff658a3beb4f916d978dfea12c2d9f16)
* Fix mishandling of `stride` param and add unit test for it
* Fix modified multi-variant per-obj option highlight
* Fix issue that per-obj FloatsOrPercents options are marked as dirty incorrectly when lost focus
---------
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: weiting.ji <weiting.ji@bambulab.com>
* fix: restore BuildVolume bounds when toggling belt mode
set_belt_printer() mutated m_bboxf when enabling but never restored
the original extents on disable or when switching infinite_y true->false,
leaving stale max.y/max.z values that broke collision and object_state
checks. Recompute m_bboxf from m_bed_shape + m_max_print_height at the
top of each call, then apply belt-specific adjustments on top.
Addresses Copilot review comment on PR #12998 (BuildVolume.cpp:196).
* chore: drop [BELT-DEBUG] to_machine_coords log to trace
Was emitting at warning level once per 0.2mm Z bucket during every belt
print export, polluting default user logs. Trace level matches the rest
of the belt diagnostics and is silent in production.
Addresses Copilot review comment on PR #12998 (BeltGCodeWriter.cpp:86).
* chore: drop [BELTRACE] make_perimeters/support logs to trace
Eight warning-level traces around make_perimeters and
generate_support_material were emitting on every call/exit during normal
slicing, cluttering default logs. They're concurrency-debug breadcrumbs
not user-facing diagnostics, so drop them to trace.
Addresses Copilot review comment on PR #12998 (PrintObject.cpp:438).
* perf: gate BeltSliceStrategy diagnostic bbox tracking behind compile flag
apply_to_trafo() walked every model vertex twice (once for min_z, once
for per-volume mesh/slicer bboxes) and emitted seven trace logs per
call. The bboxes and logs are diagnostic only; min_z is the load-bearing
output. Wrap the bbox accumulation, logging, and supporting headers in
SLIC3R_BELT_DIAGNOSTIC_LOG so production builds do the bare min_z scan.
Addresses Copilot review comment on PR #12998 (BeltSliceStrategy.cpp:95).
* fix: apply part_cooling_fan_min_pwm to first-layer plane fan crossings
apply_first_layer_plane_fan_eval emitted band-crossing M106 commands
through GCodeWriter::set_fan() without the per-printer PWM floor that
every other set_fan call in CoolingBuffer applies. On printers with a
non-zero part_cooling_fan_min_pwm, fans could fail to spin up at low
requested speeds near the belt surface.
Addresses Copilot review comment on PR #12998 (CoolingBuffer.cpp:1227).
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* Fix data race in extra bridge layer generation causing spurious bridges on top surfaces
* Guard second bridge layer against top most surfaces
* CoPilot review comments & lighting infill threading fix.
Reconciles the belt-printer branch with upstream PRs through #13723. Six
files had conflicts; three additional files needed manual follow-up fixes
where the auto-merge produced code that referenced upstream-renamed fields
or changed function signatures.
Notable reconciliations:
- TreeSupport.cpp: kept belt-floor early-exit branches around HEAD's
drop-down logic, folded upstream's `(distance_to_top > 0 ? 1 : 0)`
formula into the non-belt-floor path (upstream PR #11812). Dropped dead
`roof_enabled`/`force_tip_to_roof` locals.
- TreeSupport3D.cpp: combined upstream's safety-offset + remove_small
changes with HEAD's belt-floor clip in the per-slice trim loop. Dropped
HEAD's `else` block (superseded by upstream's rewritten bottom-contact
propagation) and re-added the belt-floor clip into the new propagation
loop. Gated the propagation on belt printers to prevent OOM when
belt-floor clipping produces empty initial slices.
- TriangleSelector.{cpp,hpp}: merged both new `select_patch` parameters
(HEAD's `up_direction` and upstream's `select_partially`); body uses
`dot(up_direction)` for the overhang angle check and forwards
`select_partially` to `select_triangle`.
- SupportMaterial.cpp: `slicing_params.soluble_interface` →
`zero_gap_interface_bottom` in HEAD's `detect_belt_floor_bottom_contacts`,
matching upstream's same-purpose rename at line 2495.
- Custom.json, GCodeWriter.cpp: simple additive merges (kept entries /
includes from both sides).
Verified by building OrcaSlicer (RelWithDebInfo) after a full deps
rebuild (Eigen v5.0.1, libigl v2.6.0 are now managed deps) and slicing
a scaled Benchy on the NORMALIZER belt-printer profile without OOM.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* minor logic swap
* first attempt, has a race condition
* fixed the offset issue
* found a solution, I think things work now (at least once I quash this race condition)
* still chasing down race conditions
* add manual shear / scale order strategy swap
* tweak manual shear, fix ui uninitialization crash
* fix z height / g-code desync issue
* fix shear then scale cutoff planes
* getting closer
* fix support termination planes
* fix incorrect offsets in shear-then-scale mode
* test - fix overextrusion due to model/layer scale
Conflicts resolved in src/libslic3r/GCode.cpp and src/slic3r/GUI/GUI_Factories.cpp.
GCode.cpp: combined upstream's air-filtration per-extruder gating
(activate_air_filtration_during_print / _on_completion), the new
extrusion-role-change gcode lambda, ZAA's path.z_contoured arc-fit
disable, raft-aware slow_down_layers branch, and Vec3d/Line3 ZAA
plumbing with the local belt-printer changes (path_on_first_layer,
effective_layer_index_for_point, should_disable_arc_fitting). All
auto-merged m_writer.X() calls converted to m_writer->X() to match
the local unique_ptr<GCodeWriter> refactor.
GUI_Factories.cpp: inserted brim_flow_ratio in the Support category
list and renumbered around the local build_plate_tilt_x/y entries.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Elefant foot compensation for solid layers
Elefant foot compensation for solid layers above bottommost by infill density manipulation.
* Update Fill.cpp
* change the option to expert cat
* use is_approx for float
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Hanif Koh