Brings the upstream color-mixing feature and its follow-ups onto the branch so the
IMEX placement and primary-routing checks are built and tested against them for the
first time.
Merged clean, no conflicts. Not yet exercised together: a mixed filament is a virtual
slot no nozzle carries, while physical_extruder_map routes logical slots to physical
heads, so the IMEX pem lookups have no defined answer for one. Print::extruders()
lists mixed slots under their own id while tool_ordering.all_extruders() lists them
post-expansion, and the IMEX code reads both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Plater::validate_current_plate() runs the same background_process.validate() as
update_background_process(), and on success clears update_apply_result_invalid(false)
and closes the ValidateError notification -- but it never consulted
imex_placement_violation(). Any event reaching it wiped a live IMEX placement error
and re-enabled the Slice button on a plate the slicer still refused; pressing Slice
then hit the check in reslice() and returned early, so the job simply never started.
Reproduce by clicking the bed with the prime tower overlapping a reserved area.
Plater::select_plate_by_hover_id() -> select_plate() calls validate_current_plate()
unconditionally, even when the clicked plate is already current, and deselects as a
side effect -- which makes it look as though deselecting the tower cleared the error.
Escape and clicks off the bed go through selection_changed(), which only renders and
clears nothing.
Extract the violation-to-message mapping into one helper and call it from both paths.
model_fits is set alongside err.string in validate_current_plate, mirroring the
missing-plugin block below it: the slice is already gated by m_apply_invalid, but
leaving m_ready_for_slice true would trap a future consumer that reads it alone.
These are the only two sites that matter. NotificationType::ValidateError has exactly
three references in the tree and update_apply_result_invalid exactly four; the other
slice-ready writers can only touch m_ready_for_slice, never m_apply_invalid, so they
cannot re-enable Slice on their own.
Three adjacent gaps are left alone, all pre-existing: "Slice all" is hard-coded
always-enabled regardless of plate state; a slice-all batch halts silently at a
violating plate because reslice() returns above the line that queues the advance; and
object_list_changed() computes its own can_slice from geometry, harmless only because
the result is ANDed with PartPlate::can_slice().
This is a hole in the shipped tower-zone check rather than a regression from rotating
the tower hull -- it was simply invisible until a tower could be placed in violation.
No automated gate: Plater is GUI-only, the helper is file-local and unlinkable, and
imex_placement_violation() needs a live wxApp and preset bundle. "Both call sites
consult it" is a call-graph property no unit test can express. The grep for a single
imex_placement_violation reference is a future regression tripwire, not evidence this
refactor happened -- it already returned 1 beforehand.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep mixed-color filaments intact when the extruder count changes
The extruder-count spinner resized the filament arrays in bulk at the tail,
which is where mixed-color slots live, so a new filament landed behind the
mix and the sidebar skipped a slot number. It now adds and removes one slot
at a time through the same calls the sidebar's +/- buttons use, so a new
slot opens ahead of the mixed tail and a removal renumbers object filament
ids, painted facets, custom g-code and mixed components rather than
clamping them away.
Drops the vector overload of set_num_filaments(), which this leaves without
callers.
Call update_dynamic_filament_list() alongside update_mixed_filament_list() in two places: after editing a mixed filament slot and when the filament count doesn't change (e.g., adding a mixed/virtual slot). This ensures per-feature filament lists reflect the updated blended colour and type without requiring a full filament count change.
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The sidebar Mixed Filament list, the extruder icons, the color painting
gizmo and the canvas filament bar now show the same bottom-to-top fade the
Edit Mixed Filament preview shows, custom gradient curves included, instead
of a horizontal fade between the two component colours. Ordinary and vendor
multi-colour filaments are drawn exactly as before.
Mixed-colour slots are virtual and never flushed. Guard auto_calc_flushing_volumes_internal against them as BambuStudio does, and make the flushing dialog's default matrix and the sidebar 'modified' comparison physical-only so the untouched mixed rows no longer count as a user edit and the Re-calculate result matches the physical-only table.
Upstream replaced MainFrame's fixed-index TabPosition enum with string-based
page ids ("feat: refactor notebook/tabs to be string based instead of fixed
index based"). The IMEX toolhead-visibility menu item was the only consumer of
that enum left on this branch, so its enable check now compares
m_tabpanel->GetSelectedPageName() against TAB_ID_PREVIEW -- the same form the
neighbouring upstream menu items use.
That mismatch is what broke CI: the branch built on its own, but the merge
commit CI builds no longer had TabPosition declared. No other conflicts.
666/666 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Selecting the web Device tab loaded the printer's web UI from the selected discovered machine
when the preset carried no host. That arm was lost merging main into this branch — two of the
three Plater.cpp hunks from #15134 survived, this one did not — leaving the tab blank, since
PrinterWebView starts on an empty URL and nothing else navigates it.
Per material slot, the Publish dialog can now embed the entire filament preset ("Full Publish") and require a curated filament type and/or colour:
- On export, full-publish vector options are masked to the author's slot so unrelated slot data never leaks into the published file.
- On load, slots are matched by the published type: a match keeps the receiver's material (full dumps ignored, partial keys applied); a mismatch replaces the slot with the first visible same-type library filament, falling back to a temporary embedded preset or skipped keys when none exists. Required colours apply regardless of the type match.
- The receiver's slot count grows only to the highest published slot.
- Published 3MFs load as a new project: the file's path is not adopted as the project filename, published metadata is stripped from the model, and the file is added to recent projects.
- Notifications list replaced slots, and the edited filament preset is refreshed so applied values surface in the GUI.
- Dialog: "Full Publish" toggle replaces the material opt-in and select-all headers; new Color/Type requirement rows with swatches.
- Add Ctrl+Shift+E shortcut for the Publish dialog (menu, key handling, and the keyboard shortcuts dialog).
- Tests for export slot masking, metadata round-trip, replacement semantics, slot growth, and skipped-key reporting.
Review follow-up. Removing pem from the ghost cache key also removed its
accidental role as the key's only printer-identity signal: the resolved
active-tools string (roster + primary) and imex_firmware_managed_zones both
shape the baked zone/ghost set but were never keyed directly, so a printer
swap between presets with matching mode names and topology could leave a
stale ghost set. Key all three in build_imex_cache_key, which also hardens
the zone cache against the same pre-existing gap.
Also from review: the tooltip swatch reuses the pem/map its label already
hoisted (one resolution, not two); the bake constructs ghosts with no color
at all, making update_imex_ghost_colors the sole color author; the headless
!m_plater guard is documented as the wxGetApp sentinel it is.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SoftFever