- WipeTower: use filament_ramming_volumetric_speed(_nc) for ramming, falling back to
max_vol_speed only when nil; gate precool temps on enable_pre_heating
- ToolOrderUtils: disable the inter-layer forecast in the per-nozzle base reorder so
H2D/H2C ordering is unchanged
- PrintConfig: stop stripping filament_prime_volume in handle_legacy; document that
prime_volume drives the Type2 wipe tower and filament_prime_volume the Type1 one
- GCodeProcessor: exclude post-print end-gcode M400 dwells from the M73 estimate and
drop the dead air-filtration state
- Trim verbose BambuStudio source-location comments across the port
Ports snaporca-cad c741fb9677.
SketchInlineEditor::open() clamped its position with
wxGetClientDisplayRect(), which describes only the PRIMARY monitor. On a
multi-head desktop (the reporting machine runs 5760x1080 across screens
at +0, +1920 and +3840) a field anchored on the left or right screen was
clamped onto the middle one and left invisible, while m_awaiting_length
made the sketch tool consume every mouse event until it was answered:
orbit and pan died after any sketch, with Enter the only way out. Clamp
to the display the anchor is actually on instead.
Also let drags and the wheel through that freeze, so a field that lands
somewhere unexpected degrades to odd placement rather than a dead
viewport.
Both files were byte-identical between the forks apart from this change,
so they are copied verbatim. Verified on the snaporca side by the user;
this fork is still uncompiled (needs Eigen 5.0.1, which the available
deps image does not provide).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
load_local_machines_from_config() iterated a reference to the live
m_local_machines map while erase_local_machine() erased from it for
printers without access rights, invalidating the range-for iterator
(use-after-free on ++it). Iterate a copy instead, as the code did
before commit 5028a5000e.
Mirrors snaporca-cad a016dffb48 + 4b828c4798 so the two forks do not drift:
- Sidebar on Orca's widget set: ComboBox for all 25 pickers, StaticBox
frames for the tool cards / feature tree / bodies list, framed double
spins, and no stack of full-width action buttons (Prepare's left panel
is parameters only).
- Toolbar: document group + undo/redo + mode-gated tools, commit far
right, ordered via keyed slots, at Prepare's 40 px / 4 px geometry.
- Polygon options and a new Move/Rotate card (distance, axis, angle) in
the sidebar instead of inline in the toolbar row.
- DesignSketchTool: stop consuming the LeftDown over a solid. Orca starts
a rotate drag on the press, so swallowing it killed orbit/pan whenever a
body was on screen. The pick now resolves on LeftUp within 4 px.
DesignSketchTool.{cpp,hpp} were byte-identical across the forks and are
copied verbatim. DesignPanel.cpp needed one hand-merge: mainline's
DropDown is Item-based (DropDown::Item{text,tip,icon}, DropDown(items&))
where snaporca passes parallel vectors, so feat_dropdown/ToolFlyout keep
the mainline form. Checked field-by-field against this fork's
Widgets/DropDown.hpp.
scripts/docker-iter-build.sh: mount the root CMakeLists.txt and cmake/
rather than inheriting the baked copies, which silently drops the
SLIC3R_CAD gate, and stop defaulting to snaporca's build volume - sharing
it made the two forks overwrite each other's cache and binary.
NOT COMPILED. This fork needs Eigen 5.0.1 (find_package(Eigen3 5.0.1
REQUIRED)) while the available snaporca-deps image supplies 3.3, so it
needs its own deps build to verify. The behaviour above was verified only
on the snaporca side.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
* Call proper EXT variant of the function if framebuffer type is EXT
* Update glad with `GL_EXT_framebuffer_blit` and `GL_EXT_framebuffer_multisample` extensions support
Xcode's CodeSign phase rejects the bundled Python runtime's dotted dirs under Contents/MacOS. Disable it for the Xcode generator so the linker ad-hoc signs local dev builds; CI (Ninja) and the notarized bundle are unaffected.
Give previously-bare panels a keyed background so the existing dark-UI walk
can theme them. Runtime-created widgets (HMS items, device firmware/nozzle
panels) route their whole subtree through one UpdateDarkUIWin(this) call
instead of per-widget darkModeColorFor, which also themes their child text
and follows live light/dark switches. Extruder-card chips re-apply their
colours from Sidebar::sys_color_changed so a live switch updates them too.
Design drew raw OS wxCheckBoxes (grey square + inline text) where Prepare shows
Orca's teal check, one of the most visible reasons the two panels looked
unrelated. The six sidebar checkboxes (extrude flip, hole through, thread
internal, revolve flip, boolean keep-tool, loft ruled) now use Widgets/CheckBox:
the widget carries no text, so each label moves into the row's left column,
which is also Prepare's row idiom and matches the label/control grids.
CheckBox is a wxBitmapToggleButton, so its per-control Binds and the panel-wide
preview refresh listen for wxEVT_TOGGLEBUTTON as well; boolean/loft get a
label+control row instead of a bare full-width control. Checkboxes align to the
left edge of the control column, as Prepare aligns its own.
The two sketch-toolbar checkboxes are left alone — they live in the top toolbar,
not the left panel.
Verified on :10: Flip direction renders as a teal check with a white tick and
toggles correctly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Second half of the Prepare alignment. The 14 tool forms were plain 2-column
wxFlexGridSizers whose control column never grew, so every control sat at its
natural width right next to its label — nothing lined up, and it looked nothing
like Prepare's "label ......... [value]" rows.
- two_col_form() builds the grid with a growable control column; all 14 forms use
it and their 56 controls are added with wxEXPAND, so controls fill one aligned
column at the panel edge.
- The sketch-session Plane row is a box sizer, not a grid, so it gets a stretch
spacer for the same effect.
- The DoF readout collapses when empty, and the Bodies block starts hidden — both
reserved a blank line on a fresh document, leaving dead space above the action
buttons that Prepare does not have.
Verified on :10: Extrude edit shows Extrude dist / End / 2nd dist / Taper /
Result as aligned label+control rows; Plane row right-aligns; no Bodies box on an
empty document.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
The two tabs used different idioms for the same concepts, which reads as two
different apps: Design was 264 px against Prepare's ~467 (the canvas edge jumped
on every tab switch), used bare micro-labels where Prepare uses icon + Head_14
card headers with a rule, hung its row actions on a loose strip under the tree
instead of in the section header, and drew raw OS-default wxButtons next to
Prepare's Orca-styled ones.
- Width now tracks Prepare's sidebar at runtime (sync_sidebar_width() reads the
live width on tab activation) rather than being hardcoded, so the two cannot
drift apart if Orca changes its sidebar.
- "Feature tree" and "Bodies" use the card_header() helper the panel already had
(icon + Label::Head_14) plus a wxStaticLine, exactly as the tool cards do.
- The six row actions moved into the Feature tree header, Prepare-style, at
header weight (24 px) instead of 36 px control weight.
- Buttons are Orca Buttons (ButtonType::Expanded, full width); Commit to Plate
gets ButtonStyle::Confirm as the tab's primary action.
- Margins/spacing come from SidebarProps (ContentMargin/TitlebarMargin/
ElementSpacing) instead of hardcoded 12/6/4.
Verified on :10: sidebars are the same width and share the header idiom.
Still to do: label-left/control-right rows inside the tool dialogs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Bodies were appended INSIDE the feature tree, after the features, and only when
there was more than one body. Two consequences:
- With a single body — sketch + extrude, the common case — no body row existed
at all, so the solid could not be selected from the tree. That also blocked
Move (it requires a selected body), the show/hide eye and every body-targeted
op; the viewport was the only way to select.
- With several features the Bodies group was pushed past the tree's auto-sized
height (capped at 9 rows) and clipped out of view, so bodies became
unreachable as history grew.
Bodies now live in their own list under the feature tree, mirroring Onshape's
Features + Parts split that the rest of the tab already follows. The list is
hidden while empty, sizes to its content (scrolls past 6), keeps the selected
row across a recompute, and greys hidden bodies as before. Selecting in either
list clears the other, so only one thing is ever "the target".
Verified on :10: single body -> Body 1 listed, selectable, Move opens the gizmo
on it (previously impossible); two imported solids -> both listed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
# Description
Support the 02.08.01 network plug-in and resync the Bambu device
workflow
Brings the Bambu network plug-in up to the 02.08.01 series and reworks
the plug-in
lifecycle around it (ABI gating, OTA install, hot reload), then catches
the device and
monitor side up to what that plug-in and current firmware expose — AMS
mapping, send-flow
checks, print options, and the device status pages.
**Included:**
_Network plug-in_
- Default to the 02.08.01 series and bind its new ABI symbols; bump the
reported
`SLIC3R_VERSION` to 02.08.01.55
- Gate loading to ABI-compatible `AA.BB.CC` series, and store plug-in
identity by series
rather than by exact build
- Fix the OTA update flow: install immediately, hot-reload without a
restart, and destroy
the agent before unloading the DLL
- Version selector lists same-series OTA builds newest first, with
dynamic
"(Latest)" / "(installed)" labels
- Restart printer discovery and reload saved LAN printers after a hot
reload
_Device layer_
- Move axis, calibration, chamber, status and upgrade handling into
DeviceCore; drop the
transitional shims
- Resync the DeviceCore state models, accessory firmware versions,
cold-pull state and
filament checks
_Device UI_
- Resync the AMS control/item widgets, device dialogs, device tab
widgets and status pages
- Add the AMS best-position popup, filament-change stop button, hub
version row and HMS
fallback
- Device error dialog: print-failure snapshot, purification and
don't-remind actions
_Send flow_
- Resync the send flow and port the remaining pre-send checks and
advisories
- Warn when a filament will switch extruders mid-print; block TPU on the
l
without firmware support (O1D/O1E)
- Map switch-bound AMS trays to both extruders and show combined nozzle
mapping
- Add the shared-PA-profile toggle
_Print options / timelapse_
- Restructure DevPrintOptions around a detection-option map and parse
the
bits on the live push path
- Add firmware print-option toggles, plus timelapse storage-location
selection with a
free-space check
_Fixes_
- Inverted MQTT jog on i3-architecture printers, plus assorted popup,
mapping and
status-parse defects
_Tests_
- New Catch2 coverage for network version selection and device filament
mapping
Printers that don't advertise the new capabilities are unaffected —
every added behavior is
gated on a firmware or plug-in capability flag, and the only profile
chang
`support_print_check_firmware_for_tpu_left` to O1D/O1E.
# Screenshots/Recordings/Graphs
<img width="714" height="500" alt="image"
src="https://github.com/user-attachments/assets/33e54581-3fb0-4a3e-b80c-afa8adfabe4c"
/>
<img width="530" height="212" alt="image"
src="https://github.com/user-attachments/assets/d0c55fd5-74c3-4aab-81a5-786d0aaf8828"
/>
<img width="483" height="527" alt="image"
src="https://github.com/user-attachments/assets/71ceaad1-a082-41cb-aa1a-4b9abb30d9db"
/>
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The Design gizmo already had both move arrows and rotation rings, but drew them
at a fixed 70 px arm regardless of the body: on a 40 mm cube everything
collapsed into a ~100 px tangle buried inside the solid, so the rings were
effectively invisible and the tool read as "move only, no rotate".
Orca's Prepare gizmos size themselves from the selection's bounding sphere
(GLGizmoRotate3D: m_radius = Offset + sphere radius) so the handles always clear
the object. Same rule here: DesignPanel passes the body's bounding-sphere radius
(scale-aware) into the gizmo, and move_gizmo_arm() returns
max(70 px, 1.25 * radius) — the screen-space floor keeps it grabbable on a tiny
body or when zoomed far out. Ring radius and BOTH hit-tests derive from that one
helper, so picking cannot drift from what is drawn.
Verified on a 40 mm cube: rings now encircle the body, arrow drag moves with a
live mm readout, ring drag rotates live.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Export wxWidgets include dirs and defines from libslic3r_gui on Linux so
tests outside src/ compile against its GUI headers. Relocate the bundled
Python runtime to Contents/Resources with a Contents/MacOS/python symlink
(codesign cannot seal the dotted python3.12 dirs under Contents/MacOS) and
replace the deprecated codesign --deep with explicit inside-out signing of
every Mach-O in the bundle.
The stored plug-in identity is now the AA.BB.CC series (matching BambuStudio)
rather than the full build version, so the meaningless 4th build digit stops
driving config, the whitelist, filenames, and the version selector. This fixes
the macOS "can't switch to an older build" bug: the cloud endpoint is
series-keyed and only ever serves a series' newest build, so downgrade-by-
download was impossible and the download silently adopted the latest.
A startup migration normalizes an existing full-version config and file name to
the series form with no re-download, the loader resolves a bare series to the
newest same-series build on disk, and user-provided custom-named plug-ins
(libbambu_networking_02.08.01_custom.*) are still enumerated and loaded.
Discovered builds were inserted positionally behind the whitelist entry they
anchored to, so an OTA-installed 02.08.01.53 listed below 02.08.01.52. The list
is now built by appending and sorting once, which also drops the per-entry
insertion scans.
"(installed)" tested whether the library was present on disk, so it marked every
version ever selected - switching leaves the previous library in place. The flag
is now is_loaded, resolved against the plug-in actually loaded, and the two
combo populators share one label helper.
restart_networking() rebuilds m_agent with a null printer agent, so the bare
m_agent->start_discovery() no-oped (NetworkAgent::start_discovery returns false when
m_printer_agent is null) and LAN discovery stayed dead until the user next changed a
preset. Call switch_printer_agent() instead - it installs the printer agent for the
active preset and then starts discovery, mirroring startup.
When the network plugin is not yet installed at startup, on_init_network builds
the DeviceManager without an agent, so its constructor skips loading the persisted
LAN printers. After the plugin is installed and the network stack hot-reloads, the
manager is reused via set_agent(), which never loaded them - so previously paired
printers stayed missing from the device list until an app restart. Load them once a
real agent first arrives.
- Allow mapping to EMPTY trays only from the multi-machine send page and keep
both panels pickable in the LEFT_AND_RIGHT view
- Guard the error-dialog cloud snapshot against stale callbacks and fall back
to the local illustration on timeout
- Parse the ipcam storage-check ack and axis/chamber pushes defensively
- Strip fan-control telemetry, initialize the upgrade error code, restore the
.json filter in the model-id scan
- Fix best-position popup tray lookup, gradient placement, and colour-list
ownership
- Cover switch binding sets and invalid-track transients in DevMapping tests
Trim the version whitelist to the latest series plus the pinned legacy build,
and reject out-of-series configured versions at startup, compatibility check,
and load failure - falling back to the latest installed build or the clean
re-download flow so the config never keeps pointing at an unsupported build.
* Block plugins from reading or writing app config and cloud credentials
Add a denied-filename registry to the plugin audit sandbox, seeded with OrcaSlicer's config (.conf/.ini) and the cloud refresh-token file. The deny is checked above the loading-mode read exemption and the allowed roots, so a plugin cannot reach these files even though they sit inside data_dir(), which is itself an allowed root. Case-insensitive prefix matching also covers the .bak/.tmp companions that hold the same data, and os.rename/os.remove are hooked alongside open so the files cannot be deleted or clobbered either.
Adapt the speed dial's ActionRegistry to the collapsed
get_plugin_capability(PluginCapabilityId) overload, and restore the
script success/skipped status message the dialog lost when its
PluginScriptRunner refactor was superseded by ActionRegistry.
The preset option was plugin_preference_overrides while the GUI field type
that renders it was GUIType::plugin_config, for one and the same thing.
Settle on "config": the store, the dialog and the Python hooks all say config
already, so renaming that way touches 4 files instead of the whole plugin
subsystem and the public plugin API.
Keep the _overrides suffix — the option is the preset's override layer over
the base PluginConfig store, a distinction EffectiveCapabilityConfig tracks.
Also wrap the printer tab's group heading in L(); it was the only one of the
three missing it, and was therefore untranslatable.
Replace hand-rolled nozzle type comparison + Hybrid hack with
BBS-style NozzleGroupInfo comparison in check_ams_status_impl.
Previous approach: direct nozzle_volume_type == printer_flow_type
with a Hybrid tolerance lambda. This either suppressed the dialog
entirely (Hybrid always matched) or showed it on every Preview switch.
New approach (matching BBS):
- Build preset NozzleGroupInfo from extruder_nozzle_stats config
- For Hybrid presets: expand into per-type counts (Std#N, HF#M)
- nozzle_count==0 (never synced): dialog appears for first sync
- nozzle_count>0 (after sync): compare with printer GetNozzleGroups()
- Counts match → dialog suppressed on Prepare↔Preview switches
Safe for all multi-extruder printers (H2C, H2D): non-Hybrid presets
use single NozzleGroupInfo per extruder. Single-extruder printers
exit at is_multi_extruders() guard before reaching this code.
Reference to BBS: BambuStudio/src/slic3r/GUI/Plater.cpp
is_extruder_stat_synced() line 16642
The merge kept this branch's PluginConfig design, which deletes
PluginDescriptor::settings, get_plugin_settings() and ctx.params, but left
references to them behind: the slic3rutils target did not build, and the
bindings test still asserted the removed ctx.params attribute.
Port the two settings tests onto PluginConfig instead of dropping them. They
guard a field bug where a cloud-metadata refresh wiped a plugin's settings and
it silently ran on its own defaults, so the equivalent properties are still
worth pinning: that a stored config survives the refresh, and that an edited
config reaches the plugin through a real dispatch.
Also defer PluginsConfigDialog's web commands off the webview script-message
callback, as PluginsDialog already does. Its remove_preset_override handler put
a modal wxMessageBox on that stack, which is the GTK crash class fixed in
b779a7bfed/f2ccbfc8b5 for the sibling dialog.
Alexandre Folle de Menezes