A `<metadata>` element without a `type` attribute makes
`get_attribute()` return nullptr, which was then assigned to a
`std::string` and read as a C string.
Check it the way the sibling metadata handler already does, and stop the
parse.
Regression test in `tests/libslic3r/test_amf.cpp`, a new file: the suite
had no AMF test at all.
46 files include the same header twice at file scope, outside any #if,
66 times in all:
Model.cpp included Model.hpp twice, Utils.hpp <algorithm> and
<string_view> twice, seven GUI headers <wx/dataview.h> and
<wx/artprov.h> twice. The second include of each is removed.
GCodeSender.cpp and GCodeSender.hpp have been commented out of
libslic3r/CMakeLists.txt since 2022 and their only two includes are
commented out as well. Both files go, with the commented lines, and
the CMake entry for SLA/SupportTreeIGL.cpp, a file that no longer
exists.
151 using-directives, using-declarations, type aliases and namespace
aliases in source and test files that nothing refers to: the name is
never used, it duplicates a using already in scope, or the code sits
inside the namespace it names. Each one was removed on its own and the
file still compiled, both as it is and with every header-level using
taken away, so none of them was only redundant because a header leaks
the same name.
With the using gone, 28 #include lines and one forward declaration had
no other reference left in their file (boost/optional.hpp without any
optional, property_tree headers without any ptree) and go with it.
No header is touched.
Brings belt-printer up to main eb5b9a77b9. One conflict: main translates
the pressure advance test name (#16142) on the line after belt's guard that
keeps PA Line and PA Pattern off belt printers; both are kept.
* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
Brings belt-printer up to main 4b4a261787. Resolutions:
- G-code header (#15897, #15915): main moved the header, config and
thumbnail block later in _do_export; write_belt_header() moves with it,
still after the thumbnails and outside the BTT_TFT gate.
- _extrude: first-layer acceleration keeps the per-path first-layer plane
test with main's cached nozzle index (#16028); main's set_speed out-param
form (#16108) everywhere else.
- GCodeWriter (#16108): the arc-to-polyline fallback for machine mappings
that cannot express G2/G3 now runs in the out-param extrude_arc_to_xy,
which is the overload GCode calls, and appends to the caller's string.
- GCodeProcessorResult: the belt fields join main's forwarding assign.
- Clipper2 (#15969): belt arrange helpers take Slic3r::Point; the tree
support join types lose their ClipperLib qualifier.
- CLI arrange (#15837): belt printers still reserve no wipe tower.
- Wipe tower options (#15841): the two new sparse-layer toggles are hidden
for belt printers like the rest of the tower options.
- Keyboard shortcuts (#15706): main's registry replaces the old key switch;
the belt view toggle is re-registered in the next commit.
- Print::process: the belt purge-plan undo runs before main's SliceStarted
event.
- scripts/filament_id_snapshot.json: deleted on main (a77209af8f).
- Includes and appended tests: union of both sides.
Every file that included STEP.hpp, directly or not, got namespace fs = boost::filesystem at global scope, and 29 sources and three headers relied on it without saying so. Headers now spell out boost::filesystem, and each source that uses fs declares the alias itself.
* Fix CLI Crashes on Malformed Project, Assemble List and No-Input Runs
Four CLI paths indexed vectors without checking their size and crashed
with SIGSEGV on malformed input:
- A project inherits_group whose length is not the filament count plus
the process and printer entries was split by position. It is now
ignored with a warning, as if the project had none.
- An assemble list object with an empty filaments list passed validation
and was then read at index 0. It is now rejected as a config error, as
is a negative filament id.
- --slice N --arrange 1 on a project without plate metadata read the
missing plate data. It now falls back to the plate's own filaments,
like the other plate data reads.
- --assemble with no input model built an object with no volumes. It is
now rejected as invalid parameters.
A tests/cli script covers each case through the binary, since all four
live inline in CLI::run().
* Move the Assemble List Parser into libslic3r
Behaviour-preserving move of the --load-assemble-list JSON parser and
its plate/object structs from the CLI into libslic3r/Format/AssembleList,
so the format can be unit tested. The parser returns its own
AssembleListResult and takes the plate limit as a parameter; CLI::run
maps the result to the same exit codes as before. Every validation rule
and log message is unchanged.
Adds Catch2 coverage of the valid layout and each validation rule.
* Keep the Process and Printer of an inherits_group of the Wrong Length
A project whose inherits_group did not have one entry per filament plus
the process and printer entries was loaded as if it had none. The CLI
then looked for system presets under the names of the user presets,
found none and refused to slice a project that slices on main.
The group is now read as before: the process first, the printer last
and the filaments in between, up to the filament count. A filament
without an entry counts as a system preset. A group with fewer than two
entries is still ignored. The warning stays.
* Add Missing Includes Across src/libslic3r
Every libslic3r source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, with libslic3r headers spelled libslic3r/... so they resolve outside the library's private include paths. MultiMaterialSegmentation.hpp, Support/SupportParameters.hpp and Format/STEP.hpp are made self-contained by hand.
* Make the libslic3r Headers Compile on Their Own
Each now includes, or forward-declares, what it uses instead of relying on what its includers happened to include first. Left out: I18N.hpp, which errors on purpose when included from GUI code, and VoxelizeCSGMesh.hpp and SLA/bicubic.h, which nothing includes and which no longer compile at all.
* Add the Includes Missing From the Hand-Fixed libslic3r Headers
clang-tidy would not edit these headers while they failed to compile on their own, so the first pass skipped them. With the headers now self-contained, a second pass adds the rest.
* Keep Windows Setup Ahead of the Added libslic3r Includes
Print.cpp and Thread.cpp open with a _WIN32 block that has to come first; without the precompiled header, Print.cpp otherwise reaches windows.h through OCCT with NONLS defined and boost/regex fails. OpenVDBUtils.cpp and SLA/SupportTreeBuilder.cpp had includes inside #ifndef NOMINMAX, which libslic3r defines on Windows, so those were skipped there. .clang-tidy also ignores the MSVC STL and UCRT internals, Boost.Multiprecision's fwd.hpp and CPython's Windows include directory.
* Re-Add libslic3r Includes After the Clipper2 2.0.1 Migration
Rebasing onto main took main's version of the files the Clipper2 migration rewrote, so their added includes are restored here, along with includes for main's new code. Clipper2's individual headers are now ignored by clang-tidy: they only build the Z variant through clipper2_z.hpp, which defines USINGZ first, so including clipper.core.h and the like directly broke ClipperZUtils.cpp.
A 3MF vertex with a nan/inf coordinate was accepted by both parsers and crashed qhull in
ModelVolume's convex hull while the file was still loading. Both vertex handlers refuse it,
and volume generation checks again whichever parser produced the geometry. The main
parser's _stop_object_xml_parser keeps a message a handler already set.
_generate_current_object_list expands component references through a work list
with no bound. An object whose component points back at itself, or a pair that
point at each other, makes the list grow until the process runs out of memory:
a few hundred bytes of XML take the slicer past 20 GB of resident size.
Bound the expansion by the number of objects in the file. A reference chain
longer than that has to revisit an object, so this rejects every cycle and no
acyclic file, however deeply nested. A second bound on the number of expanded
components stops an acyclic graph that fans out exponentially.
- Offer table: user-facing strings carry the L() marker so xgettext
extracts them; DesignOffer.hpp, DesignSketchTool.cpp and
SketchInlineEditor.cpp are listed in localization/i18n/list.txt.
- Offer: model-mode Constrain sits in the same row as the sketch one;
Interference is wired; Rib shows its R key; a verb that accepts the
selection but is blocked by the document stays greyed with its reason
instead of vanishing from the submenu; one refusal wording per verb.
- Extrude infers Join when the profile touches a solid (new
CadDocument::body_touching_sketch) and on face push/pull; New body in
free space. Revolve/Sweep/Loft/Boolean use the same result words.
- Interference and volume/area reports go to the status line in mm3/mm2
instead of modal dialogs; Delete Body no longer asks (it is undoable).
- New feature names match the card header ("Extrude 3"), translated;
"Coordinate system", "Angle (°)", center/color spelling, translated
face and length readouts, slot hints say width.
- CAD gizmos in Prepare are selectable only with the CAD feature on; the
sketch auto-close setting is stored per design.
- Docs: confirm/cancel rules, enabling the feature and MCP in
design_tab.md; drift-only right-click in interaction-model.md; the
portability note rewritten to describe the integration as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
Upstream moved pressure advance onto the extruder variant: enable_pressure_advance,
pressure_advance and the four adaptive keys joined filament_options_with_variant,
the repeated inline blocks in set_extruder() became a helper, and the lookups
moved from the filament id to get_filament_config_index().
All three conflicts were the same collision, because this branch had modified two
of those same inline blocks to pass a tool qualifier so each carriage is addressed
explicitly in parallel modes. Taking either side whole would have lost something:
upstream's drops the qualifier and leaves parallel carriages with no pressure
advance, ours drops the per-variant indexing and reads the wrong column on a
multi-variant printer. The helper now takes an optional tool, defaulting to -1,
which omits the qualifier. imex_pem_tool_for() already returns -1 off IMEX and in
primary mode, so non-IMEX output is unchanged, and the three call sites that never
passed a tool keep upstream's behavior exactly.
The third conflict was two test cases appended at the same place. Both are kept.
Separately, one defect that merged cleanly and so was not flagged: the loop that
emits pressure advance for secondary carriages at the start of a print still
bounded and indexed those vectors with a raw filament id. They are variant
expanded now, so their length is columns rather than filament slots -- the value
read was the wrong column, and the bound no longer sat in slot space, letting an
out-of-slot filament through. It now bounds on filament_diameter and translates
with get_filament_config_index(), which is what the sibling second-layer
temperature loop already does.
Verified: both changed translation units compile clean under -Werror. The merge
was resolved independently twice and the two resolutions agree on every line of
code. Not yet run: the Release test suite and a parallel-mode slice sweep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
load_obj emits the second triangle of a quad from corners 0, 2 and 3,
but read its texture coordinates from corners 0, 1 and 2, so half of
every textured quad sampled the wrong part of the texture. The corner
indices are now passed down to where the coordinates are read.
A mesh with inward-facing triangles is flipped after loading, which
swaps corners 1 and 2 of every face. The texture coordinates were left
as they were. They are now swapped along with the corners.
Brings in nine commits, including stricter slice validation of custom G-code and
filename formats across system profiles, OBJ and DRC import hardening, and the
Ender-3 V3 SE extrusion mode fix. None of them touch the files this branch
changes.
* Validate OBJ Texture-Coordinate Indices
load_obj read the texture coordinates of a face without checking the
vt index, so a face referencing a vt past the end of the list read out
of bounds and crashed, and a face vertex with no vt read index -1.
Out-of-range or missing indices now fall back to a zero UV. The face
keeps its entry in the per-face UV list, so the following faces stay
aligned, and the geometry loads as before.
Negative (relative) vt indices were also rebased by dividing the float
count by 3, but each vt stores two floats.
* Reject DRC Meshes Without Positions or with Invalid Face Indices
load_drc dereferenced the POSITION attribute without checking that the
mesh has one, and trusted the decoded face indices, which the Draco
decoder does not check against the point count. Both now fail the load
cleanly. A failed vertex conversion is treated the same way.
The libslic3r tests link Draco so they can encode the malformed meshes
in-test.
* Keep OBJ Texture Coordinates That Carry a W Component
The vt parser stopped reading the optional third component when texture
coordinates were cut down to u and v, but the check that nothing is left
on the line stayed. A legal "vt u v w" line was therefore rejected and
silently dropped, shifting every later texture index. The w component is
parsed again and discarded.
The texture coordinate stride is now a named constant, OBJ_TEXCOORD_LENGTH,
used by the parser and the importer, so the relative-index rebase cannot
drift from the storage layout again.
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
The 3MF importers read XML entries into a single expat buffer whose size is
an int, while the archive extraction used the entry's 64-bit declared size.
The two could disagree for entries declaring more than INT_MAX bytes.
Reject such entries before allocating, and use one size for the buffer, the
extraction and the parse. This applies to the BBS importer, the PrusaSlicer
importer and the PrusaSlicer fingerprint probe. The load now fails with an
error instead.
* Reject 3MF Plate IDs Below 1 Instead of Indexing Before the Plate List
The plate importer copied each plater_id from model_settings.config into the
1-based plate list after checking only the upper bound, so plater_id="0"
wrote to plate_data_list[-1] and crashed on load. Both copy sites now reject
ids below 1 with the same "invalid plate index" error already used for ids
past the end.
* Drop Malformed 3MF Paint Data Instead of Reading Past the Bitstream
Painted facets are decoded from a bitstream a nibble at a time with no bound
check, so a truncated or corrupt paint string in a 3MF (for example split
codes with no children behind them) read past the end and crashed on load and
slice. A one- or two-side split naming side 3 also indexed past the triangle's
vertices.
Every nibble read now goes through a bounds-checked reader. Loading validates
each triangle's tree and drops a malformed one with a warning, so the stored
data, used extruder states and later decoding all agree. deserialize() also
unwinds and clears any triangle whose tree is incomplete or malformed, and
has_facets() stops at a truncated triangle. Valid streams decode unchanged.
* Add missing TopTools includes to GeometryEngine.cpp
* Add missing TDF_LabelSequence include in STEP.cpp
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
The parallel printing options shipped to testers as is_ixex and ixex_*,
became is_imex and imex_* when the feature stopped being called iXex, and
the two clearance keys were renamed once more to say what they measure:
nozzle to carriage edge on the collision side, not the carriage's full
width. Nothing translated any of it, so loading an existing printer profile
dropped every one of these values - the keys are unknown and cleared.
is_ixex is the one that matters most, because without it the others migrate
into a feature that stays switched off, leaving settings that look
configured and do nothing.
Per-plate mode is persisted twice and only one path went through
handle_legacy. Plate metadata in a 3MF is matched by exact attribute name
and written with set_key_value, so a project saved between the per-plate
mode landing and the rename loaded every plate back on Primary and sliced
single-carriage with no warning. The loader now accepts the old attribute
name.
ixex_primary_col and ixex_primary_row are dropped rather than mapped: the
primary is a role inside the mode's active-tools string now, not a grid
coordinate, and they were never in an option list, so no saved file carries
them.
The test drives the full era-1 key list and asserts the enum values rather
than non-nullness, since a forward-compatible substitution would otherwise
hide a failed deserialize behind a default. handle_legacy had no test before
this.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
import_presets reduced each zip entry to a basename by stripping only
'/', so on Windows an entry named with '\' separators kept its
directory components and was extracted wherever they pointed. Strip
both separators, and reject any entry whose name still escapes the
extraction folder.
The preset name from the JSON and the bundle id from
bundle_structure.json were joined onto the preset directory unchecked
as well, which let either of them write outside it on every platform.
Both are now validated before anything is written.
The check is the is_path_within_root helper the 3MF importer already
had, moved to Utils so both importers share it. It treats '/' and '\'
as separators on every platform, so a bundle that would escape on one
OS is rejected on all of them.
