# Description
Printers discovered/bound under one printer agent (e.g. built-in BBL)
were leaking into another, independent agent's "My Device"/"Other
Device" lists and inheriting its saved access code, since neither the
device list nor bind state was ever scoped by which agent found them.
- Add printer_agent_id to MachineObject/BBLocalMachine, stamped at
discovery/bind time; filter get_my_machine_list(),
get_my_cloud_machine_list(), and update_other_devices() by it.
- clear_other_devices() now drops entries stamped by the outgoing
agent on swap, so the incoming agent's own discovery re-inserts and
re-stamps them fresh instead of leaving them stale-tagged forever.
- Scope access_code by (dev_id, printer_agent_id) on BBLocalMachine
(LAN only since cloud's userMachineList is always refreshed live from
the account API, so it isn't at risk the same way), with a
BBL-only legacy fallback to the old flat access_code/user_access_code
keys so existing bindings keep working.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Selecting the web Device tab loaded the printer's web UI from the selected discovered machine
when the preset carried no host. That arm was lost merging main into this branch — two of the
three Plater.cpp hunks from #15134 survived, this one did not — leaving the tab blank, since
PrinterWebView starts on an empty URL and nothing else navigates it.
In printer-agents mode the legacy web page was appended under Notebook::PAGE_MONITOR, which
resolves to the same "monitor" id as the native Device tab. FindPageByName returns the first
match, so PluginPages::relayout() — which saves the selection by name and restores it after
rebuilding the tab strip — moved the user off the web tab onto the native one. The tab also
disagreed with its own label, being created as "Device (legacy)" and renamed to "Device (Web)"
on the next show_device() call.
* Move Generic vendor above Bambu vendor in AMS material setting.
* Remove hardcoded sorted_names. Alphabetically sort Bambu with all vendors
* Fix sorting with case insensitive comparison
* Use arithmetic to get rank distance because priorities are stored in a vector. This lets us remove the <interator> include.
* Move currently active filaments added to the Prepare sidebar to the top of the AMS Material Selection combo box.
It is likely the user wants to set the material to the currently active filament.
* Reduce logging verbosity.
* Refactor current active preset filament finding to find nested preset inheritance.
* Initialize pointer to null before usage.
* Remove old commit code
* Remove new line
---------
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Fix detached copies of system presets
* Clarify detached preset compatibility
* Show unique preset state in save dialog
* Update SavePresetDialog.cpp
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* fix(GUI): honor "Ignore" when layer height exceeds the configured maximum
Entering a layer height above the printer's max_layer_height on the Print
Settings tab fired two guards in sequence. Tab::on_value_change prompts
"...Adjust to the set range automatically?" with an Adjust/Ignore choice, and
ConfigManipulation::update_print_fff_config then showed an OK-only "Too large
layer height. Reset to X" dialog whose result was never checked, so it always
reset the value. The second guard overrode the user's "Ignore", resetting the
layer height regardless.
Changes:
- Extract the shared Adjust/Ignore dialog into
ConfigManipulation::layer_height_out_of_range_dialog, reused by the tab
(Tab::on_value_change) and the per-object/part settings panels. The dialog now
names the value it will clamp to and reads correctly for too-low as well as
too-high.
- The tab/plate path is already covered by Tab::on_value_change, so the
duplicate reset is dropped from update_print_fff_config.
- The per-object/part panels have no on_value_change hook, so add
ConfigManipulation::check_object_layer_height and call it from the object
settings update paths, gated on the edited option (changed_opt_key ==
"layer_height"). It prompts once per layer-height edit and does not re-prompt
when unrelated object settings change after the user chose "Ignore".
Fixes#14214
* refactor(GUI): unify the layer-height range check across tab and object panels
Copilot review of #14369 noted that the per-object check only guarded the
max at extruder 0 and skipped the too-low case, diverging from the tab.
Move the whole range check into ConfigManipulation::check_layer_height,
used by both Tab::on_value_change and the per-object/part panels. It takes
the widest [min, max] window across the printer's extruders, offers
Adjust/Ignore in both directions, and resets a near-zero value. The tab's
inline block collapses to one call, dropping the duplicated limit logic.
* fix(GUI): only enforce layer-height limits that are actually set
max_layer_height defaults to 0 (unset), so the unconditional range check
offered to clamp any layer height to 0 on presets that don't define it.
Guard each branch (near-zero, too-high, too-low) so an unset limit disables
that direction; the slice-time nozzle-diameter check still applies.
Also run check_layer_height before update_print_fff_config in the object
panels so a near-zero per-object value prompts the same way the tab does,
with update_print_fff_config's fallback still covering the no-minimum case.
_update_select_plate_toolbar_stats_item(true) runs from
on_action_slice_all before the select-plate toolbar has necessarily been
initialized. m_all_plates_stats_item is only assigned in
_init_select_plate_toolbar, so slicing a multi-plate project shortly
after startup (before the Preview tab has rendered) leaves the pointer
null while show_stats_item is true, and the branch dereferences it,
crashing with SIGSEGV.
Every other dereference of this pointer already null-checks it. Add the
same check here so the all-plates stats item is left unselected until the
toolbar is initialized instead of crashing.
Fixes#15116
Fix Windows crash in Replace all with 3D file
Keep the replacement result message as wxString and substitute the volume
name directly.
On Windows, wxString::ToStdString() cannot encode the Unicode status icon
through the active ANSI code page and returns an empty string. Passing that
empty string to boost::format with a volume-name argument throws
boost::too_many_args and exits OrcaSlicer.
Prime towers reserved depth from the prime volume alone, ignoring the flush
matrix: rib-wall towers in both the engine and the preview, and rectangle and
cone towers in the preview, which never carried the flush-aware estimate the
engine already used. The preview also read the print preset, which does not
carry the printer- and filament-scope keys the estimate needs and so silently
fell back to defaults. On multi-nozzle printers the flush matrix, which holds
one block per nozzle, was additionally read as a single block. The tower could
come out too small for the purge it has to hold.
The flush-based estimate also skipped the height-based minimum depth that the
prime-volume one applies, so low-flush prints could estimate a tower shallower
than the one that actually gets built.
The placement clamps and the tower-approach router both stood in the bed's
bounding box for the bed itself, so on a delta or hexagonal bed the prime tower
could be parked in a corner that does not exist and the nozzle could be routed
across it. Both now test the real printable outline, slicing reports a tower
that does not fit instead of printing it off the bed, and a tower parked near an
edge is routed along the clamped side rather than falling back to a straight
line across the tower.
Also fixes the placement validation rotating the tower hull by degrees read as
radians about the plate origin, and never rotating the generated tower footprint
at all.
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
Ian Chua