* Keep User Filament Presets on Printers Their Parent Listed in 2.4.2
User presets store only their diff, so they inherit the parent's
compatible_printers. Profile changes since 2.4.2 renamed and narrowed many
system filament presets, so user presets made against them disappear from
printers they were made for and the saved selection silently falls back to
another filament at startup.
orca_profile_tool.py legacy-compat writes, per current system filament
preset, the printers it covered in an older release and no longer lists,
kept only where a preset with the same filament_id still covers the printer
and they share an extruder variant. The loader gives these printers to user
presets that inherit their parent's list, without writing any file; saving
a preset detached, cloned or with its own list drops them.
* Ask Before Migrating User Filament Presets to Their Legacy Printers
Instead of giving user presets their parent's 2.4.2 printers in memory,
detect the user presets that inherit their parent's compatible_printers
and are missing printers from the legacy map, and offer to migrate them
at startup or from Help > Migrate Filament Presets.
Migrating first backs up the user folder to
filament_preset_migration_<datetime>_backup.zip in the configuration
folder, and migrates nothing if that fails. It then writes the printers
into each preset's compatible_printers, patching only that key so the
preset keeps the parent name it was saved with and older releases can
still resolve it. Cloud-synced presets are marked for upload.
No asks again at the next launch; "Don't remind me again" stops the
startup prompt.
* Key the legacy filament preset map by the parent's 2.4.2 name
* Check the legacy filament preset map in CI
* Limit the 2.4.2 filament preset migration to presets that need it
Only presets that still name their parent as 2.4.2 did and have no printer
list of their own are offered, and a preset changed after it was found is
left alone. The startup prompt appears once, after upgrading from 2.4.2 or
earlier, as a standard dialog that keeps "Don't remind me again"; Help >
Migrate Filament Presets is unchanged. Migrating no longer overwrites an
unsaved printer-list edit or marks the project modified.
* Ask on Every Start and Take the User Presets Lock Once When Migrating Filament Presets
The startup prompt no longer depends on the version the previous run
recorded: whoever still has user filament presets that lost printers is
asked, including users already on a 2.5.0 nightly or alpha. Answering No
asks again at the next start; "Don't remind me again" stops it.
Migration takes the user presets lock once, around the backup and every
file write, instead of once per preset. A lock another instance holds is
reported once ("another OrcaSlicer instance is saving presets") with
nothing written, rather than as one failed preset after another once the
lock's cool-down kicks in. Detection records each preset's file and the
list it will get, so the writes need no collection lock while the user
presets lock is held, the order InstanceLock requires; the loaded presets
are updated afterwards.
* Run the Legacy Compatible Printers Map Check in check_profile.sh and .ps1
CI's "Check profiles" job checks resources/info/legacy_compatible_printers.json
against the v2.4.2 profiles, and its failure message points at these scripts
as the local reproduction, so they run the same check: legacy_compat, right
after profile_tool. The v2.4.2 tree comes from git archive of the tag, is
cached in the work dir like the other downloads, re-extracted with --refresh,
and fetched from upstream first when the checkout lacks the tag.
* Back Up Before the User Presets Lock and Merge Migrated Printers Into the Live List
The lock guard is meant for a few file operations, and zipping a large user
folder is not one, so the backup is taken before it and the guard covers the
writes only; each write re-reads its file, so a save that slipped in before
is still respected.
The in-memory update adds the lost printers to the list the preset holds at
that moment rather than replacing it with the one found at detection, and
leaves a pending cloud sync state alone: a download waiting to be saved kept
its newer list and its "save" flag, which "update" would have cancelled.
The lock message no longer blames another instance alone, since the lock is
also refused for a while after a miss and when the lock file cannot be
opened.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add Missing Includes Across src/libslic3r
Every libslic3r source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, with libslic3r headers spelled libslic3r/... so they resolve outside the library's private include paths. MultiMaterialSegmentation.hpp, Support/SupportParameters.hpp and Format/STEP.hpp are made self-contained by hand.
* Make the libslic3r Headers Compile on Their Own
Each now includes, or forward-declares, what it uses instead of relying on what its includers happened to include first. Left out: I18N.hpp, which errors on purpose when included from GUI code, and VoxelizeCSGMesh.hpp and SLA/bicubic.h, which nothing includes and which no longer compile at all.
* Add the Includes Missing From the Hand-Fixed libslic3r Headers
clang-tidy would not edit these headers while they failed to compile on their own, so the first pass skipped them. With the headers now self-contained, a second pass adds the rest.
* Keep Windows Setup Ahead of the Added libslic3r Includes
Print.cpp and Thread.cpp open with a _WIN32 block that has to come first; without the precompiled header, Print.cpp otherwise reaches windows.h through OCCT with NONLS defined and boost/regex fails. OpenVDBUtils.cpp and SLA/SupportTreeBuilder.cpp had includes inside #ifndef NOMINMAX, which libslic3r defines on Windows, so those were skipped there. .clang-tidy also ignores the MSVC STL and UCRT internals, Boost.Multiprecision's fwd.hpp and CPython's Windows include directory.
* Re-Add libslic3r Includes After the Clipper2 2.0.1 Migration
Rebasing onto main took main's version of the files the Clipper2 migration rewrote, so their added includes are restored here, along with includes for main's new code. Clipper2's individual headers are now ignored by clang-tidy: they only build the Z variant through clipper2_z.hpp, which defines USINGZ first, so including clipper.core.h and the like directly broke ClipperZUtils.cpp.
* Lock Config and Preset Files Across Instances and Write Them Atomically
Every running instance shares one OrcaSlicer.conf and one user preset
tree, and nothing kept their writers apart. Two instances saving at the
same moment, or the cloud preset sync thread writing while the GUI thread
saved, could interleave, and a reader in another instance could open a
preset JSON or .info file between truncate and close and get a partial
file, dropping that preset for the session with a parse error.
Add InstanceLock, a scoped guard that serialises the threads of one
process through a recursive mutex and other processes through an advisory
OS file lock: flock on POSIX, held on the guard's own descriptor so no
other close in the process can drop it, and LockFileEx on Windows. The
outermost guard opens the lock file and closes it on release, so nothing
stays open between saves and a data dir can be removed once nothing is
saving into it; the file itself is kept, since deleting it would let a
third instance lock a fresh file while the second still holds the old
one. It is best effort: when the lock file cannot be opened or locked, or
another instance still holds it after a second, the guard logs once and
lets the write proceed, then leaves the file alone for ten seconds, so a
hung instance never blocks every other one and a holder stuck in a
debugger does not cost a stall per save. The guard sits at the leaf
readers and writers: set_sync_info_and_save() calls save_info() under the
preset collection mutex, so a batch lock around save_user_presets() would
invert the order against the sync thread. The user preset scan reads its
files on worker threads without the guard, since the mutex would
serialise them, and takes it per file in the serial commit step, so a
save never waits for the whole scan. Each read keeps the bytes of the
preset and its .info as they were before parsing; commit compares them
with the disk under the guard and reads a file that changed again, so it
never deletes or writes back over another instance's newer save, nor
installs a .json and .info from two different saves; a preset another
instance removed in the meantime is not installed. Without the guard, in
a cool-down, the scan still loads the presets but leaves their files
alone: an unreadable file stays for the next scan, and a derived
compatible printer is not written back. Read-only scans, which is what
the CLI does, take no lock and create no lock file.
AppConfig holds OrcaSlicer.conf.lock in load() and save(); load is
included because the Windows path restores from the .bak copy. Every
user preset writer and reader holds user.lock: Preset::save(), which
writes no .info when the preset itself could not be written, since an
.info without its preset reads as a cloud deletion request, save_info(),
reload() and remove_files(), each preset the scan commits, the
bundle metadata reads and write, the .info removal after a cloud-confirmed
delete, the orphaned-.info scan on the sync thread, the bundle folder
removal on unsubscribe and the physical printer writers and delete
paths. A bundle import extracts under cache/ into a folder per process
and per import, where no scan reads.
Preset JSON, .info, bundle metadata, physical printer and config files,
and the caches and state files that already used a temporary by hand,
now go through write_file_atomically(), which writes <file>.<pid>.<n>.tmp
beside the target and renames it over, so a reader that never waits sees
a complete old or new file. A symlink is followed; a target that is not
a regular file is written in place; and when no temporary can be created
beside an existing target, or the rename itself is refused, by a Windows
reader holding the file open or a mount that cannot replace in one step,
the helper writes in place as before, since losing the save is worse
than a torn read. On POSIX the rename replaces the
target atomically where the old code removed it first and left a window
with no file at all; only a mount that refuses a one-step replace gets
the old remove-then-rename. A crash between temporary and rename leaves
the temporary behind, which no scan reads. Preset::save() returns
whether it wrote the preset, so the scan counts a compatible printer it
could not write back as an error. A failed config write keeps
the config dirty, and the idle handler waits ten seconds before retrying
while an explicit save always tries.
* Run the Cross-Process Lock Test on Every Platform
The test that checks the guard yields to a lock held elsewhere forked a
child to hold it, so it was left out on Windows. The OS lock belongs to
the handle on Windows and to the open file description elsewhere, so a
second handle in the same process is refused like another instance
would be. The test now holds the lock that way and runs everywhere.
* Fill Settings Missing From a CLI Project From Its System Presets
A project saved before a printer or process option existed has no value
for it. The GUI takes such keys from the project's system preset; the
CLI left them at the option default, so e.g. extruder_clearance_dist_to_rod
sliced as 40 instead of the P1S's 33.
The CLI now resolves the project's system printer and process presets by
name and copies the keys the project lacks, skipping preset bookkeeping,
print-host keys, the extruder variant layout and keys the legacy handler
drops. PresetBundle::resolve_system_preset finds the vendor through its
manifest or preset cache, so it also works in release builds, which ship
vendors as caches only.
* Load a CLI Project's Printer and Process Settings as the GUI Does
The CLI filled only the keys a project lacked from its system preset.
The GUI builds a project preset differently: the project's values go
over the default preset, without the print-host keys, and every key
the project does not list in different_settings_to_system is refreshed
to its base system preset's current value. After a profile update the
two sliced the same project differently.
That step now lives in Preset::load_external_config, which takes plain
configs and gets the base preset from a callback, so the collection
lookup stays in PresetCollection. PresetBundle::project_different_keys
builds the kept-key set from a project's escaped entry, adding the
preset bookkeeping keys, and is used by both the GUI and the CLI.
PresetCollection::load_external_preset calls the shared step with no
change in behaviour.
The CLI now builds the project's printer and process configs with the
same step, passing the system preset from resolve_system_preset. That
drops the hand-kept skip list for print-host and variant-layout keys
and the legacy-key check: the shared step already excludes print-host
keys and maps per-variant values onto the base preset's variant layout.
The --uptodate path and a printer or process given on the command line
are left as they were.
Because the GUI's kept-key set always holds the bookkeeping keys, the
refresh runs for every project that names a system preset, so the CLI
now loads that preset's vendor on every such run.
* Run every profile maintenance job from one tool
orca_id_tool.py becomes orca_profile_tool.py, and orca_extra_profile_check.py
and orca_filament_lib.py fold into it as subcommands: check, generate-id, fix,
trim, update-index and update-snapshot. The three scripts already overlapped --
the checker imported half of its rules from the id tool, which in turn kept a
copy-pasted set of output helpers to avoid the resulting import cycle -- while
disagreeing on how a vendor is enumerated, how a JSON file is read and what the
exit code means. One file settles all three.
check, normalize, trim and update-index reproduce their predecessors exactly; normalize and
update-index were diffed byte-for-byte against the old scripts over a copy of
the whole tree. Deliberate changes: the compatible-printers check no longer
switches itself off when --check-materials is passed, an error exits 1 rather
than -1, update-index honours --profile-type and reports a profile it cannot
place instead of dropping it from the index, fix and update-index gained
--dry-run, trim keeps an unindexed file some surviving profile still inherits
from, and vendors are enumerated as directories with an index -- which is why
blacklist.json, a data file that an unscoped index rebuild once wrote four empty
list sections into, loses them here and will not collect them again. The dead
rename_filament_system() helper is gone.
The suite under scripts/tests now covers the maintenance commands too, and CI
runs it; nothing there ran in CI before. No shipped profile data changes apart
from those four keys.
* update vendor index files with "python3 ./scripts/orca_profile_tool.py update-index" and "python3 ./scripts/orca_profile_tool.py normalize"
* CLI: evaluate compatible_printers_condition in the compat checks
Slicing from the CLI with --load-settings exits with
CLI_PROCESS_NOT_COMPATIBLE (-17), "The selected printer is not compatible
with the process preset in the 3mf.", for process/printer pairs the GUI
accepts. Reproducible with stock, unmodified Prusa system profiles:
orca-slicer --datadir <datadir> \
--load-settings "<datadir>/system/Prusa/process/0.20mm SPEED @CORE One HF 0.4.json;<datadir>/system/Prusa/machine/Prusa CORE One HF 0.4 nozzle.json" \
--load-filaments "<datadir>/system/Prusa/filament/Prusament PETG @CORE One HF 0.4.json" \
--slice 0 --outputdir /tmp/out model.stl
The four compat checks in CLI::run did a literal name match against the
`compatible_printers` list only:
for (index ...) if (new_print_compatible_printers[index] == new_printer_system_name)
process_compatible = true;
Process profiles that declare compatibility through
`compatible_printers_condition` and leave `compatible_printers` empty are
therefore always reported incompatible -- the condition is never consulted.
For 0.20mm SPEED @CORE One HF 0.4 that condition is:
printer_notes=~/.*PRINTER_MODEL_COREONE[^_a-zA-Z0-9].*/ and
nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/
The GUI does not have this bug: is_compatible_with_printer() in Preset.cpp
treats an empty list as "no explicit constraint" and evaluates the
condition in that case.
Fix: replace the four loops with a check_compat lambda that calls
is_compatible_with_printer() -- the same helper the GUI uses -- wrapping
the already-loaded DynamicPrintConfigs in lightweight Preset /
PresetWithVendorProfile shells. The 3MF-embedded process/printer full
configs are kept in current_process_full_config /
current_printer_full_config so the condition can be evaluated for the
reprocess paths too; those fall back to the previous literal match when
the full config was not preserved.
Behaviour is unchanged where an explicit compatible_printers list exists:
is_compatible_with_printer() performs the same name match, and returns
true when both list and condition are empty, matching the existing
"old 3mf, no compatible printers, set to compatible" path.
Split out of #13731 (section 1) as a standalone, single-purpose change.
Orthogonal to the inherits-chain resolution work in #14718 / #15302 /
#15438; those decide which values a preset resolves to, this decides
whether the resulting pair is considered compatible.
* CLI: translate the 3MF's renamed compatibility keys before the compat check
The 3MF fallback fed the project config to is_compatible_with_printer() as-is,
but a project config does not carry compatible_printers or
compatible_printers_condition. PresetBundle::construct_full_config() erases both
and re-emits them as print_compatible_printers and
compatible_machine_expression_group; they are renamed back only on the
PresetBundle load path, which the CLI does not take. The check therefore saw no
list and no condition, read that as 'no constraint' and accepted every printer.
That is not just a wrong accept. An early true skips the !process_compatible
block that sets machine_switch, so the new printer is never appended to
print_compatible_printers and the exported 3MF stays marked compatible only with
the printer it came from -- which is exactly what that block exists to prevent.
Translate the two keys back before the check. Index 0 of the expression group is
the print preset; the group is filled print, filaments, printer.
Also note in the comment that profiles/BBL/{process,machine}_full/ are gitignored
and generated by nothing in-tree, so current_*_full_config is always empty and
this fallback is the only live path -- not the rare non-BBL case the original
comment implied.
Reported with measurements by HanifKoh in review of #15449.
Preset: add a config-level is_compatible_with_printer() overload
The CLI holds resolved DynamicPrintConfigs, not Presets, so it wrapped them in
throwaway Preset shells at the call site. Moving that into Preset.cpp puts the
compatibility policy -- including the documented fail-open on a malformed
compatible_printers_condition -- in one place for the GUI and the CLI, rather
than leaving a second copy of the plumbing in OrcaSlicer.cpp to drift.
Purely additive: neither existing overload changes, so no GUI behaviour moves.
Requested by HanifKoh in review of #15449.
(cherry picked from commit 14ca1972ef4d3c7d90935d159423013a40a6bd70)
* CLI: never overwrite a real compat key with an empty renamed one
7e7f0e3 translated compatible_machine_expression_group[0] into
compatible_printers_condition whenever the group vector was non-empty. A project
the CLI exported itself carries the real compatible_printers_condition AND an
all-empty group, ["", "", ""], so the valid condition was overwritten with
"", the check saw no constraint, and every printer was accepted.
That fixed GUI-shaped projects and broke CLI-shaped ones. Bisected across six
builds re-slicing one CLI-exported CORE One project with an MK4S: every build
before 7e7f0e3 gives 'compatible 0' and takes the machine-switch path; with it,
'compatible 1' and no switch.
The raw keys now win whenever they carry something; the renamed ones are only a
fallback, and an empty value is never written over a real one. Same for the list:
print_compatible_printers is used only when compatible_printers is absent or
empty and it itself is not.
Found by a peer session re-testing the installed build.
Validate mixed-filament definitions during the published material pass: definitions whose components reference slots that do not exist or hold other mixed filaments, or that carry fewer than two components, are reported through the shared skipped_keys channel instead of shipping a mix the GUI integrity check would only flag later.
Fix the slot-limit exhaustion report being silently dropped: it wrote to published_config->skipped_keys, which the pass's final move-assignment from the local vector clobbers. All rejections now go through the local.
Remove the unreachable persist branch from add_detached_preset: no caller passes save_to_project=false, so the parameter is gone and the copy is always project-embedded.
Tests: cover the exhaustion path, the new definition validation, the identity-tier matching matrix (including substitute reporting), the structural-key denylist, whole-vector size-mismatch skips, relocation payload degradation, the "(Published 2)" uniquify chain, mixed blend colours staying out of shared preset configs, and duplicate-slot last-wins. Also fix the legacy-3mf scenario passing vacuously behind an if-guarded assertion. All existing published/3mf tests pass unchanged.
* Add caching system for presets
* Removing user\bundle serialization and keeping it only for system presets
* Integrate caching into WebGuideDialog which speeds up time of SetupWizzard and PrinterSelection dialog
* Add CI\CD step to prepare cache file in ahead of time so user does not need to wait
* Add partial cache generation when only one of the vendros is changed to speed up recalculation time
* Handle corrupted files
* Add cache to GuideDialog as previos version didn't work as expected
* Add inspecting tool and fix CI cache generation
* Generate cache per vendor
* Simplify code by mergin it in PresetBundle
* Simplify code a bit more
* Add cereal serialize() to VendorProfile, PrinterModel, Preset, and Semver
* Remove CachedPrinterModel/VendorProfile/Preset mirror structs from VendorCache
* Fix use-after-free in CallAfter lambda; replace raw thread pointer with unique_ptr
* Use get_vendor_cache_key() to match cache keys written by the app
* Remove BOM added by VSC
* Skip invalid vendors
* Remove leftover cache file
* Fix build for windows arm64
* Revert json cache back
* Update check for stale cache
* Serealize all value fields for Preset class to minimize regression later
* Minimize field duplication by moving Cache thing into PresetBundle
* Add tests for Cache system
* Add a bit more tests
* Merge branch 'main' into feature/cache_profiles_and_optimize_loading_speed
* Rvert from per-verndor to single cache file
Replace N per-vendor .cache files with a single system_presets.cache
that holds all vendors and presets in one serialized blob.
Cache load is now all-or-nothing: on hit all vendors are applied from
the bundle (sub-second); on miss all vendors are parsed from JSON and
a fresh bundle is written to the user cache dir.
Invalidation is driven by bundle_key - a sorted concatenation of all
vendor JSON version strings. Any vendor update invalidates the whole
cache and triggers re-parse on next launch.
Guide wizard (WebGuideDialog) loads the bundled cache into a plain
PresetBundle instead of a separate VendorGuideData struct, removing
the duplicate data model.
generate_system_cache simplified from a per-vendor loop to a single
save_system_presets_cache() call producing one output file.
* Transfer all Preset fields from cache via move assignmet
apply_vendor_preset_group was copying fields manually and missed
bundle_id, user_id, base_id, sync_info, updated_time, key_values,
ini_str. Replace field-by-field copy with move assignment of the
fully-deserialized Preset, then restore the vendor pointer which
is excluded from serialization.
* Ignore cache for future
* Remove not used files
* Ship one preset cache per vendor in place of the profile JSONs
Each vendor's system presets serialize into a single <vendor>.opc built at
package time, and a shipped build carries that file alone — the profile JSON
and its sub-file tree are pruned. The vendor loader, the setup wizard's profile
list and the resource installer all read a vendor through its cache, falling
back to parsing whenever one is absent, stale or unreadable, so the cache stays
an optimization and never a source of truth. Caches hold presets in source form
and resolve inheritance at load, through the same code the JSON path uses.
* Make the preset cache self-describing and load each vendor from the system folder alone
The cached DynamicPrintConfig is keyed by name, through a per-file dictionary of the
distinct opt_keys, the type each was written as, and the distinct enum value names,
instead of by serialization_key_ordinal — a position assigned by declaration order at
static init, where inserting one option shifts every later ordinal and the lookup then
succeeds on the wrong option. Because a name-keyed payload drops the options this build
cannot place rather than being rejected wholesale, the schema fingerprint goes, and with
it the two fallbacks that existed only because an installed cache died on every app
upgrade: the second lookup tier into resources/profiles and the parse fallback to the
same place. A vendor is loaded from <data_dir>/system/ and nowhere else, as on main —
which is what makes the app write its .opc files there again.
* Simplify the preset cache internals after review
* Use the shared temp-dir helper in the preset bundle loading test
* Bound stamp string reads in the preset cache
* Speed up the setup wizard with a profile-data cache
The wizard's per-vendor fast path threw on vendors present only in
resources, falling back to a ~29 s raw JSON scan on every open. Each
vendor now loads from the directory it was found in, and the derived
model/machine/filament/process catalog is cached whole in
<data_dir>/cache/wizard_profile_data.json, stamped by each vendor's
name and version - a fresh cache makes an open one file read, with no
bundle built and no presets installed (~0.2 s vs ~2 s).
* Remove debug SVG dump from a geometry test
* Move the per-vendor cache file format into PresetCacheFormat
* Move the vendor install helpers from PresetBundle into Utils
* rename
* fix flatpak
* change cache version to 1
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
# Description
Changing a slicing plugin's configuration had no effect on the sliced
result until you forced a re-slice some other way; it now applies
immediately. Print, printer and filament presets also keep their plugin
configuration separately, so configuring a plugin on one no longer wipes
out what you set on another.
A plugin's custom configuration page gets the same round of improvements
in both the Plugins dialog and the per-preset dialog: it follows the
app's light/dark theme, keeps its state while you edit instead of
resetting under the cursor, and can tell whether it is being edited
globally or for a preset, so "Restore defaults" can be labeled for what
it will actually do. The two bundled examples show this off — Twistify
now ships a custom configuration UI, and Inspector is themed, groups
# Screenshots/Recordings/Graphs
https://github.com/user-attachments/assets/02ca062a-5143-49a3-abe0-a2a040b3a928
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
# Description
When creating a new filament preset and setting the Printer Dependencies to "All", the preset does not save this setting. This issue only occurs on creation due to code that is meant to validate the data to prevent a case where the filament is compatible with none of the printers.
EDIT: While I considered redoing the data validation for this tab overall, I have now preserved the original purpose of the code, which is to add the current printer as a compatible printer only if:
- the base preset is a System preset
- the user has not specified any compatible printers
Notably, this seems to be the cause of #11959
Moving the data validation from `Preset::save_current_preset` to `Tab::save_preset` allows the Preset function to be simplified through removal of the current printer parameter.
# Screenshots/Recordings/Graphs
There is no visible change on the UI.
## Tests
Tested the following combinations of filament presets:
- System->new User
- User->new User
- User->same User
Tried to set them to All, where the System->new User should be the only case where this is replaced by a default.
In any case where there are printers already set, those settings should be kept.
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
(cherry picked from commit bc5514bbabbbaddefb33ade556a0f15c051aed7e)
Lizard