Replaces the plater-icon popover with colored transparent ghost copies
of primary-head instances on the plate, one per secondary active head
under its Copy/Mirror role transform. Left-click on a ghost opens a
compact filament picker popover for the ghost's head (MMU lane override).
Ghosts track the primary through drag/rotate/scale/mirror and invalidate
on mode or pem changes.
Key pieces:
IMEXHelpers -- imex_head_transform (Primary/Copy/Mirror), shared role
parser, per-head filament resolution with X-axis Mirror anchor.
PartPlate -- ghost state, volume rebuild on mode/map/object mutation,
primary_origin plumbed for Mirror reflection across the primary-row
gantry plane.
GLCanvas3D -- ghost rendering with per-head filament color and
translucent blending; picking routed via volume composite id.
Plater -- ghost click + tooltip; plater icon left-click always cycles.
IMEXFilamentPickerPopover -- BitmapComboBox row for one secondary head,
writes imex_head_filament_map on selection.
bbs_3mf -- round-trip the per-plate imex_head_filament_map option.
PrintConfig -- add imex_head_filament_map as a plate option.
MMU/AFC routing for parallel modes relies on the printer profile's
physical_extruder_map (see prior commit for authoring format). Primary-
row heads and their per-plate filament overrides are resolved through
that map, so PA and temperature emission address the correct physical
extruder when multiple logical slots share one carriage.
Tests: IMEXHelpers coverage for Primary/Copy/Mirror transforms
including a 2x2 off-row regression guard for the X-axis reflection fix.
Temperature emission (GCode.cpp, PrintConfig.cpp, ConfigManipulation.cpp):
- Set temperatures for all active tools in layer_change_gcode for iMEX
parallel modes (primary + secondary carriages)
- Fix filament temperature commands so Layer 1 temperatures only emit on
the first layer; subsequent layers use normal layer-change temperatures
- Remove stray temperature commands that fired outside the intended context
- Consolidate iMEX temperature handling into the second-layer transition;
clean up emission logic and naming throughout
Pre-slice warning dialogs (PartPlate.cpp/hpp, Plater.cpp):
- Collect per-plate IMEX warnings before slicing: multi-material conflict,
bed temperature mismatch between carriages (>5 °C delta), and filament
type incompatibility
- Show a dismissible Yes/No dialog from both "Slice Plate" and "Slice All"
actions; No returns to 3D view, Yes proceeds to slice
- Refresh plate thumbnails after the panel switch so previously-generated
thumbnails are not left black
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Add runtime display backend detection for Wayland support
Add LinuxDisplayBackend utility to detect X11 vs Wayland at runtime
using GDK_IS_X11_DISPLAY / GDK_IS_WAYLAND_DISPLAY macros. This is
the foundation for removing the forced GDK_BACKEND=x11 and enabling
native Wayland support.
- New files: LinuxDisplayBackend.hpp/.cpp with get_linux_display_backend(),
is_running_on_wayland(), and is_running_on_x11()
- Propagate wxHAVE_GDK_X11 / wxHAVE_GDK_WAYLAND from FindGTK3.cmake
as compile definitions to libslic3r_gui
- No-op on non-Linux platforms (returns Unknown / false)
* Fix Phase 1 code quality: pragma once, source ordering, static cache
* Make X11 initialization conditional for Wayland support
Remove the unconditional GDK_BACKEND=x11 force that blocked native
Wayland. Replace with conditional logic:
- EGL safety fallback: re-force X11 only when wxUSE_GLCANVAS_EGL is
off and WAYLAND_DISPLAY is set, with a warning log
- XInitThreads() only called when DISPLAY is set (X11 in use)
- __GLX_VENDOR_LIBRARY_NAME only set when DISPLAY is present (GLX-specific)
- WEBKIT_DISABLE_COMPOSITING_MODE only set under XWayland (both
DISPLAY and WAYLAND_DISPLAY present)
- Guard X11/Xlib.h include with __has_include for robustness
- Restore display validation to accept either DISPLAY or WAYLAND_DISPLAY
This is Phase 2 of the Wayland support plan.
* Fix Phase 2: safer EGL macro check, add clarifying comments
* Add GLAD2 library and replace GLEW linkage in build system
Set up GLAD2 as a static library to replace GLEW for OpenGL loading.
GLAD2 supports both GLX and EGL, which is required for Wayland support.
- Create src/glad/ with pre-generated GLAD2 sources (GL 4.6 compat)
- Add src/glad/CMakeLists.txt building glad as a static library
- Wire glad into src/CMakeLists.txt before libvgcode
- Modify libvgcode to use shared glad for GL path (keeps local copy
only for GLES2/Emscripten) to avoid duplicate symbol conflicts
- Replace GLEW::GLEW with glad in libslic3r_gui link libraries
Note: GLEW is kept in deps for OpenCSG. Code migration from GL/glew.h
to glad/gl.h headers will follow in Phase 3B+3C.
* Fix Phase 3A+3D: libvgcode GLAD include, dead files, dlopen dep, OpenGL link var
* Migrate from GLEW to GLAD: replace headers and API calls across codebase
Replace all #include <GL/glew.h> with <glad/gl.h> across 49 source files.
Migrate GLEW API calls to GLAD equivalents:
- glewInit/glewExperimental -> gladLoaderLoadGL()
- GLEW_EXT_* / GLEW_ARB_* extension checks -> GLAD_GL_EXT_* / GLAD_GL_ARB_*
- Remove GLEW-specific EGL/GLX mismatch #error guards (not needed with GLAD)
- Replace unavailable EXT symbols with core GL equivalents in
GLCanvas3D.cpp (GL_MAX_SAMPLES, glRenderbufferStorageMultisample,
glBlitFramebuffer, GL_READ/DRAW_FRAMEBUFFER)
- Update log messages from glewInit to gladLoadGL
* Fix Phase 3B+3C: remove GLEW find, clean EXT symbols, update attribution
- Remove find_package(GLEW) block from root CMakeLists.txt since GLEW
is no longer linked by any main application code
- Remove "glew" from SLIC3R_STATIC option description
- Replace all remaining EXT framebuffer symbols with core equivalents
in render_thumbnail_framebuffer_ext and _rectangular_selection_picking_pass
- Update AboutDialog credits from GLEW to GLAD
* Enable EGL in wxWidgets and add runtime GLX/EGL selection for Wayland
- Set wxUSE_GLCANVAS_EGL=ON in wxWidgets build and Flatpak manifest
- Add PreferGLX() call on X11 sessions for driver compatibility
- Remove Phase 2 safety fallback (EGL is now always compiled in)
- Guard SwapBuffers against hidden canvases to prevent Wayland stalls
* Fix Phase 4: move PreferGLX to app startup, fix FPS counter guard
Move wxGLCanvas::PreferGLX() from OpenGLManager::create_wxglcanvas()
(static initializer) to GUI_App::on_init_inner() before any wxGLCanvas
is constructed. This prevents a race where SkipPartCanvas could trigger
wxGLBackend::Init() before the GLX preference is set. The new location
also adds explicit is_running_on_wayland() detection with a warning for
unknown backends.
Move increment_fps_counter() inside the IsShownOnScreen() guard so FPS
is only counted when a frame is actually swapped.
* Update GLFW from 3.3.7 to 3.4 for runtime Wayland/X11 backend selection
Replace the compile-time GLFW_USE_WAYLAND flag (which locked to a single
backend) with GLFW 3.4's GLFW_BUILD_WAYLAND + GLFW_BUILD_X11 flags that
build both backends and auto-select at runtime based on the available
display server. This enables the CLI thumbnail renderer to work on both
Wayland and X11 sessions without separate builds.
* wayland: Fix UI call sites that rely on global screen coordinates
On Wayland, wxGetMousePosition() returns (0,0) and SetPosition() is a
no-op for top-level windows. Fix the highest-impact call sites:
- GLCanvas3D: Use cached m_mouse.position from event handlers instead
of wxGetMousePosition() + ScreenToClient() in get_local_mouse_position()
- Plater: Use event-relative coords via ClientToScreen(e.GetPosition())
instead of wxGetMousePosition() in 3 leave-window handlers
- BBLTopbar: Use event.GetPosition() and FindToolByPosition() directly
in mouse handlers instead of wxGetMousePosition()/FindToolByCurrentPosition()
- Search: Use focus-based dismiss logic on Wayland instead of
wxGetMousePosition()-based rect checks in SearchDialog and
SearchObjectDialog
- GUI_App: Skip SetPosition() in window_pos_restore() on Wayland where
it is a no-op; still restore size and maximize state
- Button: Position tooltip relative to button widget via ClientToScreen
instead of wxGetMousePosition()
* Fix SearchDialog Wayland dismiss: guard against search_line focus
* flatpak: Add Wayland socket permission for native Wayland support
* spec
* Fix crash on Wayland when wxWidgets lacks EGL support
Restore the safety fallback that forces GDK_BACKEND=x11 when wxWidgets
was not built with wxUSE_GLCANVAS_EGL=ON. Without this, the GLX backend
tries to access a non-existent X11 display on native Wayland, crashing
in wxGLCanvas::IsDisplaySupported() with SIGSEGV at offset 0xe4.
Also add a defense-in-depth guard in detect_multisample() that skips
the IsDisplaySupported call entirely on Wayland without EGL.
Root cause: deps/wxWidgets must be rebuilt after enabling EGL. The
compile-time check in OrcaSlicer.cpp detects the mismatch and falls
back safely.
* Fix EGL detection: use wxHAS_EGL instead of wxUSE_GLCANVAS_EGL
wxUSE_GLCANVAS_EGL is a CMake build option, NOT a C++ preprocessor
macro. The actual macro defined in wxWidgets setup.h is wxHAS_EGL.
All compile-time EGL checks were using the wrong macro, causing
the safety fallback to always trigger even with a properly built
EGL-enabled wxWidgets.
* Fix GL function pointers invalidated on Wayland/EGL
gladLoaderLoadGL() dlopen's libGL.so.1 to resolve GL function pointers
via dlsym, then immediately dlclose's the handle. On X11/GLX this is
fine because the GLX context keeps libGL.so mapped. On Wayland/EGL,
nothing else holds libGL.so open, so dlclose unmaps it and all function
pointers become dangling — causing SIGSEGV on the first GL call.
Fix: on Wayland, use gladLoadGL(eglGetProcAddress) which resolves
function pointers through the EGL loader without opening/closing
libGL.so.
* fix crash on start and various rendering issues
* fix crash on close
* small refactor
* move GPU selection to desktop file
* clean up a bit
* clean up more
* fix appimage error
- Add warning badge (obj_warning.svg overlay) to the iMEX plate icon when
a parallel mode is active alongside multi-material objects on the same plate
- Add has_imex_multimaterial_conflict() using get_extruders(true) so only
filaments actually used on the plate are checked
- Move multi-material caution dialog from reslice() into on_action_slice_plate /
on_action_slice_all so it fires exactly once per user action and does not
disrupt GL thumbnail generation during Slice All
- Fix is_imex missing from p->config init key list so on_config_change()
diff detection correctly triggers refresh_imex_icons()
- Defer imex_changed handling until after set_bed_shape() so m_shape is current
- Replace plain remove button with ScalableButton (imex_remove.svg) in mode rows
- Add EditGCodeDialog launch button per mode row for placeholder browsing
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IMEXModesCtrl:
- Primary mode is now a non-deletable first row stored as sentinel
"primary" in imex_mode_names; older configs load cleanly
- New rows default T0 → Primary when no tool assignment is stored
- Filter "primary" from plater popup/cycle list to prevent double entry
- imex_tools_per_gantry cap raised 2 → 4
Zone sizing:
- Zone width/height now based on active tool count only; inactive tools
donate their bed share to active neighbors (fixes 4-tool layout)
- Active col/row maps (col_to_zone/row_to_zone) applied consistently
across zone fills, collision strips, and primary zone box
GCodeViewer animation:
- Mirror position formula fixed: left-of-copy reflects across copy
zone's left edge; right-of-copy reflects across right edge
(T3 was rendering on top of T1)
- strip_width/row_strip_height use active counts, matching PartPlate
Stability:
- Early return in calc_imex_zones() when tool_states is empty; prevents
OOB crash on new printer with stale process-preset mode name
- is_imex toggle in on_config_change calls refresh_imex_icons() so the
plate mode icon appears without requiring a new project
GCode:
- Remove "primary" guard so Primary mode gcode field is emitted at
start of print
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add per-plate iXex mode icon to the plate toolbar (normal, hover, dark, dark-hover SVG variants)
- Left-click cycles through available modes; right-click shows a popup menu with all modes as radio items
- Mode changes are recorded in the undo/redo snapshot system
- Fix double context menu: suppress EVT_GLCANVAS_PLATE_RIGHT_CLICK and EVT_GLCANVAS_RIGHT_CLICK when the iXex icon popup was already shown
- Remove ixex_parallel_mode combo from Print Settings > Other > Special mode (superseded by per-plate icon)
- Remove dead code: refresh_ixex_mode_combo(), m_ixex_mode_combo member, related Tab reload hook
- iXex mode persisted in 3MF project files via existing plate metadata serialization
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Auto-arrange now injects the carriage collision zones as hard excluded
regions (is_virt_object) when an iXex parallel mode is active, using the
same BoundingBoxf3 data already stored for rendering and violation checks.
Objects will no longer be placed in the mirror-edge danger strips.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds std::optional<BoundingBoxf> m_ixex_primary_zone_box to PartPlate,
populated by calc_ixex_zones() alongside the existing secondary/collision
zone geometry. The new ixex_primary_zone() getter calls ensure_ixex_zones()
so callers always get fresh data. ArrangeJob::process() replaces the
full-bed bedpts with the primary zone corners when the getter returns a
value, so auto-arrange no longer drops objects into the bed center.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The thin rectangular outlines around copy/mirror zones caused visible
aliasing and appeared to flash during interaction. Removed the border
GLModel, its build code in calc_ixex_zones(), the render block, and
the unused border field from IXexTheme.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces first-class parallel printing (copy/mirror modes) for printers
with multiple independent X-axis carriages. Branded iXex (independent X
extruder), targeting Klipper firmware with a firmware-agnostic design.
- PrintConfig: new printer options declaring iXex capability and geometry
(is_ixex, ixex_gantry_count, ixex_tools_per_gantry, carriage dims,
tool layout, and per-mode name/role/gcode arrays)
- Preset: iXex keys registered in printer and process preset option lists
- Tab: IXexModesCtrl visual grid editor in Printer preset tab; mode
dropdown in Process → Others tab; clear_pages() nulls iXex pointers to
prevent dangling-pointer crash on preset save
- PartPlate: 2D zone visualization (active/dimmed/dividers) and
placement-violation detection (has_ixex_placement_violations) that
blocks slicing when objects fall outside the primary zone
- Plater: violation detection wired into update_background_process so
the Slice button is disabled with an error notification on violation
- GCode: mode-activation G-code injected before machine_start_gcode
- GCodeViewer: multi-carriage toolhead markers in sequential preview,
filament legend annotated with active carriage count and mode name
when obj is small, it uses the full build volume to compute the empty cell
we need to use the shared one
jira: STUDIO-9583
Change-Id: I4cc183df38e054a7b94579637a49168c2fb77992
(cherry picked from commit fea423cdad4ee1a24c077cfeed99962e89953d5b)
(cherry picked from commit 06d483ee462f6b1a7a3f39805c81ac0b6f0dfcca)
1. Always change the map and mode in plate if plate mode is not default
2. Always add pop up before slice
3. Fix the mapping issue in gcode viewer
jira: studio-9523,studio-9519,studio-9513,studio-9479
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d7d5daf081951ea2d49e06565762ac24064e77c
(cherry picked from commit afaa48520e16b6808f05e511ac1cfe91acadc84b)
1. Clear filament map info in plate when switch to single extruder
profile
2. Use real filament map when check tpu validality
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I45a3e8c91dd52e7300a563eda3ffb167c19b7074
(cherry picked from commit d27304e5ef2f43424046b1a1fabc8d999508be4e)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
(cherry picked from commit 2ebd14667e43dc745556f5e7bcbb7c2ccad4a007)
1. auto mode dragdrop is not allowed
2. not display filament_map when there is no result in auto mode
jira:none
Change-Id: I0800e0d832e27fe459a17bb1aa829b5e72d0ee8f
(cherry picked from commit 9ee85bef34aaabe7a4cef251f07e77f9af693a2f)
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
(cherry picked from commit 67f67d76889668fdd80ae5e496b6cbca5f771a43)
Clifford Garwood