* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Fix support interface semantics and gap handling
Fix zero-gap interface detection and gap initialization for supports and raft.
Ensures correct top/bottom contact semantics and avoids relying on default zero gaps.
* Additional fixes and robustness improvements
Fix incorrect coupling between top and bottom support interface spacing and density, ensuring bottom interfaces use their own parameters for smoothing and toolpath generation.
Restore correct bottom interface generation for organic (tree) supports when a non-zero bottom Z gap is used, and preserve contacts even when base polygons are empty.
Improve robustness of organic support slicing by fixing layer index drift and guarding against degenerate polygon boolean operations.
* Typo and semantics fix
differnt_support_interface_filament -> different_support_interface_filament
soluble -> zero_top_z_gap
* Fix non organic tree bottom support interface generation
Slim tree bottom interface layer numbers were capped by the object's layer number beneath it.
Fixed by refactoring the generation algorithm.
* Fix non organic tree interlaced support generation
Deterministic local interlaced support layers generation for non-organic tree support
* Enable support interface multimaterial for non organic tree
Enables mixed-material support interface behavior for non organic tree support type.
* Fix tree support interface layer counts and contact handling
- Correct non‑organic tree top interface layer budgeting so gaps don’t consume a layer (N stays N).
- Remove the extra roof interface pass that was duplicating the 2nd layer.
- Organic tree: use only the lowest contact footprint and avoid extra bottom‑contact extrusion so interface count matches the user setting.
* Bugfixes (a lot)
Many, many bugs fixed, majority edge-case but still not playing by the rule.
Some of them:
- on multilevel base, on very small level variations the support was capped to the topmost level height
- non-organic tree had gaps for supports in a multilevel base situiation
- independent support layer height had issues with support interfaces (base support beneath bottom interface, top contact layer sometimes missing)
- organic tree had issues with small variation multi-level base
- organic tree support with zero top Z distance could overlap support-material and interface-material paths when separate materials were used
- many, many others (I lost track of them)
* Add Rectilinear Support for Normal support type. Fix issue #9508.
* Remove duplicate the rotation logic, use raft_interface_angle function.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Port Z Anti-Aliasing from BambuStudio-ZAA (https://github.com/adob/BambuStudio-ZAA)
to OrcaSlicer. ZAA eliminates stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and micro-adjusting
Z height to follow the actual surface geometry.
Key changes:
- Add ContourZ.cpp raycasting algorithm (~330 lines)
- Extend geometry with 3D support (Point3, Line3, Polyline3, MultiPoint3)
- Template arc fitting for 2D/3D compatibility
- Change ExtrusionPath::polyline from Polyline to Polyline3
- Add 5 ZAA config options (zaa_enabled, zaa_min_z, etc.)
- Add posContouring pipeline step in PrintObject
- Update GCode writer for 3D coordinate output
- Add ZAA settings UI in Print Settings > Quality
- Add docs/ZAA.md with usage and implementation details
ZAA is opt-in and disabled by default. When disabled, the slicing pipeline
is unchanged.
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
1. speedup organic tree support by using parallel for intersection of bed area
jira: STUDIO-8451
2. add extra wall for hybrid tree support's tall branches
3. disable circle fitting for tree support. This feature produces inconsistent
circles for tree supports.
4. expose the option tree_support_branch_diameter_angle. Tree supports'
strength can be improved by increasing this value.
Change-Id: If3688ca895df98a77f6ca538077daf8fe94e53f1
(cherry picked from commit 7697eb3dc8f87204d28e6be9adaf55dfcdadbc74)
* A *lot* of import fixes for flatpak
Aside, thank you @hadess for the majority of these fixes. You are the
base point for a lot of issues fixed during the creation of this
flatpak.
* Use slic3r::load_string_file
Boost 1.84 removed `boost::fs::load_string_file` so use the func located
in Utils.hpp
* Organic supports: Added check for variable layer height, with which
Organic supports are not compatible.
Fixes prusa3d/PrusaSlicer#9528 and similar.
Check the object max Z against build volume Z in Print::validate().
Cherry-picked from prusa3d/PrusaSlicer@5b94971
* Fix crash with default tree support
* Show "support_critical_regions_only" only when using auto normal tree supports (#2195)
* Fix organic tree check
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Initial port of organic tree support from PrusaSlicer
* Port missing Organic support parameters from PrusaSlicer
* Update parameter naming
* Reorganize the `raft_first_layer_expansion` and `raft_first_layer_density` parameters as they are not only used by rafts
* Reset support style only in simple mode
* Sync latest update from PrusaSlicer & copyrights
* Fix organic tree support crash with invalid parameters
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Kiss Lorand