* Fix issue that switching printer profile is slow.
`wxGetApp().get_tab(preset_type)->select_preset(preset_name);` is called twice when switching printer profiles. Only one needed.
* Avoid unnecessary type conversion & function call during printer profile switching:
- Don't call `config->opt_string("printer_model")` repeatedly
- Use ref when possible during iterating
- Avoid unnecessary `wxString` to `std::string` conversion
cooling_filter_enabled existed as a config option but was shown nowhere,
and there was no capability flag to gate it. The cooling filter and air
filtration are alternative accessories sharing the same duct, so a
printer declares one or the other.
- new hidden printer capability flag support_cooling_filter
- "Use cooling filter" toggle in the Accessory group, shown only when
the printer supports it; the air-filtration toggle hides in that case
(no vendor restriction: third-party printers keep air filtration)
- explicit defaults (0) in the common machine base
- H2C declares support_cooling_filter=1 instead of support_air_filtration;
its start-gcode already carries the cooling-filter conditional, so the
toggle is functional. On H2C this drops the two exhaust-fan lines that
air filtration emitted for ABS-class filaments, matching the printer's
actual duct accessory; H2C is new on this branch so no existing user
output changes.
Printers without the flag keep exactly the previous accessory UI and
g-code.
New printer option fan_direction (undefine/left/right/both, default
undefine) declares which side the auxiliary part-cooling airflow comes
from. When set and the printer has an auxiliary fan, auto-orient adds a
yaw rotation so the dominant overhang area faces the airflow, and newly
added primitive shapes are pre-oriented the same way (except the Cube,
whose axis-aligned bounding box the pressure-advance pattern calibration
depends on).
- FanDirection enum + fan_direction printer option (Accessory group,
enabled only with auxiliary_fan)
- orient engine: weighted overhang areas per candidate, yaw-direction
search, vertical rotation applied on top of the primary orientation;
the cooling weights are taken from the candidate actually chosen,
including the flat-bottom tie-break
- orient_for_cooling() for primitive placement
- set fan_direction=left on H2C/H2D/H2D Pro/X1/X1E/P1S 0.4 profiles
(X1C/H2S/P2S/X2D/Qidi X-Max 4 already carried the key, which now
takes effect)
With fan_direction unset or no auxiliary fan the vertical rotation stays
identity and auto-orient results are unchanged; slicing and g-code are
never affected.
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
* fix(profiles,elegoo): resolve renamed presets and CC2 SET_PRINT_STATS_INFO G-code
Resolve legacy preset names through renamed_from when validating presets and loading external projects. Add missing renamed_from aliases for Elegoo Giga process and OrcaFilamentLibrary filaments. Combine TOTAL_LAYER and CURRENT_LAYER in one SET_PRINT_STATS_INFO command on Centauri Carbon 2 (ECC2), Centauri (EC), and Centauri Carbon (ECC) 0.4 nozzle profiles.
* chore(profiles): bump Elegoo and OrcaFilamentLibrary profile versions
Refresh installed profile bundles after renamed_from aliases, CC2 SET_PRINT_STATS_INFO G-code, and Preset.cpp renamed preset resolution fixes.
* Add Flashforge AD5X local send dialog, IFS mapping, and LAN discovery
* Refine Flashforge AD5X IFS dialog behavior
* Refine Flashforge IFS slot selection dialog
* Fix Flashforge printer selection and print mapping
* Use 3MF for Flashforge local uploads
* Generalize Flashforge local API handling
* Handle Flashforge local API IFS support more robustly
* Use selected plate filament info for Flashforge IFS mapping
* Fix Flashforge current-plate mapping and widget sizing
* Improve Flashforge IFS contrast and color matching
* Fix Flashforge legacy plate export and upload naming
Resolve PLATE_CURRENT_IDX before the legacy send-to-printhost path calls send_gcode so single-plate Flashforge 3MF exports target the selected plate instead of leaking the sentinel into export_3mf.
Sanitize Flashforge upload names in one shared utility reused by both the dialog and the backend client. This keeps the UI-visible filename and the actual uploaded filename consistent and replaces printer-problematic characters such as '=' without scattering Flashforge-specific logic through the generic Plater flow.
* Keep Flashforge upload filename sanitization in the backend only
Drop the PrintHostSendDialog API changes and keep filename sanitization inside the Flashforge backend paths that actually talk to the printer. This keeps the generic send dialog flow untouched while still normalizing problematic upload names for both serial and local API uploads.
* Only use the Flashforge IFS dialog for local API uploads
* Use reported Flashforge IFS support without model fallback
* Remove unused Flashforge slot uniqueness tracking
* Include <array> for Flashforge discovery message
* Add Optimized Gyroid infill (auto-tuned wavelength + amplitude)
New infill geometry derived from FillGyroid. Two parameters are
auto-computed per-region from density, line spacing, and layer height
(no user inputs):
omega = sqrt(density_adj) / sqrt(1 + layer_height/spacing)
clamped to [0.5, 2.0]
-- Euler-Bernoulli buckling: critical load ~ 1/L^2,
so shorter wavelength under higher load (denser infill)
raises buckling resistance.
amplitude = 0.55 / omega^2, clamped to [0.20, 0.65]
-- Curved-beam bending stress: peak stress ~ A * omega^2,
so amplitude is reduced as omega rises to keep peak
fiber stress bounded while preserving stiffness.
Files:
- src/libslic3r/Fill/FillOptimizedGyroid.{hpp,cpp} (new)
- src/libslic3r/Fill/FillBase.cpp (factory case)
- src/libslic3r/Fill/Fill.cpp (switch case)
- src/libslic3r/Layer.cpp (switch case)
- src/libslic3r/PrintConfig.{hpp,cpp} (enum + label)
- src/libslic3r/CMakeLists.txt (build sources)
User-facing: appears as "Optimized Gyroid" in the Fill Pattern dropdown.
Density still chosen by user; omega/amplitude are internal.
* Fix build: layer_height is in FillParams, not Fill base
* Add ipOptimizedGyroid to multiline infill list in ConfigManipulation
* Refactor: replace ipOptimizedGyroid enum with gyroid_optimized boolean
Per @RF47's review feedback, fold the optimized wave math into FillGyroid
itself behind a per-region boolean instead of a separate infill enum.
What changes:
- New ConfigOptionBool "gyroid_optimized" on PrintRegionConfig (default
false). When unchecked, gyroid behavior is byte-identical to before.
- Optimized wave math (compute_omega_factor, compute_amplitude_factor,
f_opt, make_*_opt, make_optimized_gyroid_waves) lives inside
FillGyroid.cpp. _fill_surface_single branches on params.gyroid_optimized.
- FillParams gains a bool gyroid_optimized field, populated in Fill.cpp
from region_config alongside fill_multiline.
- UI checkbox added under Strength > Infill in Tab.cpp, label
"Optimize gyroid wave (experimental)". Toggle is hidden by
ConfigManipulation when sparse_infill_pattern != ipGyroid.
- "gyroid_optimized" added to s_Preset_print_options for preset I/O.
What goes away:
- ipOptimizedGyroid enum value, factory case, switch cases, dropdown
label, string key.
- FillOptimizedGyroid.cpp / FillOptimizedGyroid.hpp (math moved into
FillGyroid.cpp).
- Net diff drops by ~250 lines.
Existing profiles using gyroid are unaffected.
* Wire gyroid_optimized through SurfaceFillParams to FillParams
Linux build failed because line 921 in Fill.cpp populates a
SurfaceFillParams (the dedup struct), not FillParams directly.
Add the field there, in operator< / operator==, and copy it to
FillParams at both conversion sites.
* Use toggle_line for gyroid_optimized: hide row when pattern != gyroid
* Account for multiline wall thickness in omega correction (per @RF47)
When fill_multiline = N, each gyroid wall is N lines thick, so the
geometric scale fed into the buckling correction term should be
spacing * N rather than spacing. Increases omega (tighter wavelength)
when multiline is enabled, consistent with the thicker wall being
more buckling-resistant.
* Optimized gyroid via marching squares on the implicit scalar field
Per @RF47 review: replace the analytical f_opt / make_one_period_opt
wave generator (which had visible kinks at vertical-horizontal
transitions) with a marching-squares iso-extraction on the gyroid
scalar field, modeled on FillTpmsFK.cpp.
- New marchsq::GyroidField in FillGyroid.cpp evaluates
F(x,y,z) = sin(fx*x)cos(fy*y) + sin(fy*y)cos(fz*z) + sin(fz*z)cos(fx*x)
where fx = omega * baseline (anisotropic in x), fy = fz = baseline.
- get_gyroid_polylines() runs marching squares at iso=0 and converts
rings to polylines.
- _fill_surface_single() optimized branch now builds GyroidField,
runs marching squares, and skips the bb.min translate (field
output is already in absolute coords).
- Dropped: f_opt, make_one_period_opt, make_wave_opt,
make_optimized_gyroid_waves, compute_amplitude_factor. Amplitude
has no clean analog in iso-zero extraction.
- Standard (non-optimized) gyroid path unchanged.
* Mass calibration: compensate period by cbrt(omega) for x-anisotropic field
Per @RF47: optimized vs standard gyroid had different masses at the
same sparse_infill_density setting. Cause: scaling fx by omega while
leaving fy=fz at the baseline raised the surface-area-to-volume ratio
by approximately omega^(1/3) (the geometric mean of the three
frequencies).
Fix: multiply the base period by cbrt(omega) so the geometric mean of
(fx, fy, fz) returns to the standard baseline. Net effect:
fx = omega^(2/3) * baseline_orig
fy = fz = omega^(-1/3) * baseline_orig
which preserves total mass at the same density setting while
preserving the load-direction anisotropy this PR introduces.
* Switch optimized gyroid anisotropy from X to Z (per @RF47)
Z is the typical compression-load axis for FFF parts and is not at
delamination risk under compression — so the dominant failure mode
is column buckling of the vertical strands themselves. Tightening
fz directly shortens the effective vertical strand length, which
improves Z-axis buckling resistance.
Mass calibration via cbrt(omega) period compensation still applies
(scaling exactly one of three frequencies by omega; the geometric-
mean preservation argument is symmetric across axes).
* Update src/slic3r/GUI/Tab.cpp
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Address review feedback (Copilot + @RF47)
- Fill.cpp: gate params.gyroid_optimized on (params.pattern == ipGyroid)
so non-gyroid surfaces don't differ in SurfaceFillParams by an
irrelevant flag (would unnecessarily split fill batching).
[Copilot suggestion, RF47 confirmed correct]
- PrintConfig.cpp: drop "amplitude" from the tooltip; only wavelength
is parameterized (the marching-squares iso=0 extraction is invariant
to a uniform field scale, so amplitude has no effect).
- FillBase.hpp: shorten gyroid_optimized comment to match the actual
carried state (no amplitude term).
- FillGyroid.cpp: shorten the marchsq namespace comment block; the
ODR concern was overstated (FillTpmsFK uses the same pattern fine).
* Drop redundant marchsq bb expansion (Copilot)
bb is already offset by 10 * scale_(spacing) above for edge-artifact
margin; the second offset on bb_field doubled the raster area for no
geometric benefit and hurt CPU time on large parts.
* Update src/slic3r/GUI/Tab.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Fix density mismatch + rename to Z-buckling bias optimization
Issue (per @ianalexis): at the same sparse_infill_density setting,
the optimized branch produced denser fill than standard. Verified via
Python sim (sim_gyroid_compare.py) using marching squares on the
implicit field across multiple z slices.
Root cause: the omega formula was inverted from the buckling-physics
intent. The naive sqrt(density_adj) factor produced omega < 1 at
typical print densities (10-30%), which LENGTHENED the Z wavelength
instead of shortening it -- net loss in both mass and strength.
Fix:
- compute_omega_factor: invert to sqrt(1 / density_adj), clamp to
[1.0, 2.0]. Now omega = 2.0 at low density (long strands need
most help) and clamps to 1.0 above ~30% density (no-op, since
standard gyroid is already short enough).
- Remove the cbrt(omega) period compensation. Empirically (sim
table embedded in FillGyroid.cpp comment) the inverted formula
keeps line length per area at ~1.000 of standard across all
densities with no period scaling needed.
Predicted gains (sim, Z-axis Euler buckling proxy):
density line/std strength/std
10% 1.000 2.84x
15% 1.000 1.89x
20% 1.000 1.42x
30%+ 1.000 1.00x (no-op)
Rename per @ianalexis: "Optimize gyroid wave" oversells (now no-op
above 30% density and Z-only). Renamed user-facing label to
"Z-buckling bias optimization (experimental)" with updated tooltip
that scopes to vertical compression and discloses the density cutoff.
Internal config key (gyroid_optimized) unchanged for diff size.
Real-world Instron compression tests at Brown's Prince Lab to follow.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Added UI force-sync button and fixed bug that didn't sync in one case and caused orange highlight
* Fix sync preset race: join old thread before starting new one
---------
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
