ensure_belt_purge_tower only ever looked at the current plate and kept a single
prism, so the other plates had no tower and switching plates moved the one
prism around. Every plate is now planned on its own: a prism that lies on no
plate is stale, a plate whose prism matches its recorded inputs is left alone,
the rest are deleted and recreated, highest index first.
The plate's icons, number and name scale with the plate's depth, but they sit in
the gap to the next plate, which scales with its width. On a long, narrow bed
(a 95 x 500 mm belt) they came out 40 mm wide and ran across the neighbouring
plate. The scale is now also bounded by the gap, which leaves ordinary beds
unchanged.
Plater::set_bed_shape read the belt keys from the plater's own config, which
never carries them, so the branch that tilted the bed model, drew the slicing
arrow and plane and switched the build volume to belt mode never ran. The
Prepare view shows the bed as the slicing pipeline treats it, flat; the
gravity arrow from build_plate_tilt stays, as does the preview's belt view,
which takes its angle from the G-code header.
On a belt the parts print in belt order, so every colour change between parts
is a filament change. Arrange packs items in extruder order already, but it
grew the pile around its centre, so the colours ended up interleaved. A belt
print now packs from the leading end of the bed, each row filling across the
belt before the pile advances, and the objective charges an item for every
packed part of another colour it does not fully follow along the belt,
counting the tilted layers that reach cot(angle) * height past a part, so
each colour prints as one run. The direction follows the slicing rotation: a
rotation about X prints toward +Y, one about Y toward -X, and a negative angle
flips it. Packing from the edge also means the brim has to be kept on the
bed: a belt brim is printed brim_width wide for every brim type, so that much
is reserved along every edge (between parts the brims may overlap, as on any
printer).
The purge prism is regenerated from the arranged parts, flush with the far
edge of the bed, yet arrange moved it about like a part and packed parts into
the strip it comes back to. Arrange now skips the prism and reserves its strip
with a fixed virtual item, like a bed exclusion area, whenever the parts use
more than one filament.
The prism's length follows the parts plus a ramp per unit of height; with the
height at its cap that ran 100 mm past the end of a 500 mm belt and the project
could not print. The bar now stops at the plate end, and the purge planner's
existing warning reports what the shortened bar cannot absorb.
Drops the [BELT-DEBUG], [BELTRACE], [BELT-CALIB] and [BELT-PREVIEW] log
lines, the SLIC3R_BELT_DIAGNOSTIC_LOG blocks, and the counters and
temporaries that existed only to feed them. Six of the purge tower lines
logged at warning level, which is Orca's default, on every plan. Raised in
Hanif Koh's review of #14394.
preslice_remap_*, preslice_remap_global and gcode_remap_* describe the
printer's kinematics and are set once by its profile. A wrong value sends
the gantry outside the machine (a user preset with the pre-slice remap in
place of the G-code remap emitted gantry moves to Y=646 mm), so they are no
longer offered in Expert mode.
PartPlate's containment tests treat the plate as open along Y on a belt printer with
belt_printer_infinite_y, so a long part is no longer flagged outside the plate in Prepare
while the slicer and the G-code checks accept it. The check reads the printer preset
through the app object, which does not exist headlessly, so it is guarded on the plater.
A scarf joint begins one layer height below the current layer and ramps
up along the wall. On a tilted belt that start is a step backwards along
the belt axis, into the previous layer's wall at the seam: 0.283 mm per
0.2 mm layer at 45 degrees. With an aligned seam the nozzle rams the same
spot on every layer. A BabyBelt Pro benchy with seam_slope_type=external
showed 601 such back-steps from layer 107 on, and in the field the belt
"jumped backwards" and the head knocked the part loose.
Belt printers now skip the scarf in GCode::extrude_loop, and the process
tab greys the scarf controls out for them, as it already does for arc
fitting. The regression test slices a cube on a belt with the scarf
enabled and checks the belt axis never steps back by a layer pitch.
Brings in upstream/belt-printer (the Sept 14 main merge) plus Hanif Koh's
21 review-fix commits from PR #15685, on top of the MachineKinematics
refactor and the purge-prism / tree-support / first-layer-speed fixes.
Conflict resolution:
- BeltGCodeWriter is gone (kinematics refactor), so Hanif's plate-offset
fix for it is ported into GCodeWriter: the first-layer-plane checks in
travel_to_xy / travel_to_xyz / _travel_to_z now evaluate the plate-local
point, and BeltGCode::init_belt_writer hands the stored plate origin to
the writer it installs.
- init_belt_writer(Print&) takes Hanif's signature; the BBL flag is set on
the surviving writer by GCode::_do_export.
- The shared emit_belt_brim_bands() loop keeps the BeltFloorObjectGuard the
local branch added, so apron bands classify first-layer height against
their own object.
- eager_lift keeps effective_type: it now carries set_force_normal_lift().
- GCodeWriter's initializer list follows Hanif's member order with
m_kinematics in its declared position.
- TreeSupport::detect_overhangs uses Hanif's clamped build_plate_tilt_slope()
for the non-belt path and the belt shear for the belt path.
The bed gravity arrow, volume rendering and the painter/support gizmos each rebuilt
the tilt up-vector from build_plate_tilt_x/y; use one helper that also tolerates
presets without the keys.
toggle_options() now runs on every value change and mode switch; rebuild the
brim_type choices only when the leading-edge entry has to be added or removed.
build_plate_tilt_x/y are printer-preset keys; listing them in the per-object
frequent-settings and object-table bundles stored ignored values in object
configs and crashed the object table on the process config lookup.
Merge origin/main (00429da739) into belt-printer.
Conflicts resolved:
- src/CMakeLists.txt: keep both wxInspector workarounds.
- GCodeProcessor.cpp: keep the belt compare_pos / z_for_height lines.
- PrintObjectSlice.cpp: the belt bbox-Z guard also covers main's
printable_region_ids bookkeeping.
- TreeSupport.cpp: the belt-floor check runs before main's PendingNode
queueing.
- Tab.hpp: keep the belt fields, drop the removed upload description
fields.
- tests/libslic3r/CMakeLists.txt: keep both test files.
Also included:
- eSUN PLA belt presets declare their own filament_id (OFkrxQC4) and
scripts/filament_id_snapshot.json is regenerated, as main's filament_id
check requires.
- Custom.json version bumped to 02.04.00.05 so the belt entries reach
existing installs.
- Fix the ambiguous WithinRel call in the belt apron width test, which
otherwise breaks the fff_print build.
A valid mixed filament already slices the same on the CLI as in the GUI;
these are the places where the CLI still skipped a rule the GUI applies.
- Keep the prime tower when a mixed filament is used, even if every
--load-filaments preset is the same. A mixed filament swaps between its
components every layer, so turning the tower off left the swaps with
nothing to purge on.
- Leave a mixed slot's row and column of the flush matrix at zero when
--filament-colour triggers a recompute, as the GUI does; a mixed slot
never reaches a nozzle.
- Refuse a mixed slot that has no filament of its own. Feature filament
ids aimed at it were past the filament count, got reset to filament 1
and the model silently printed in one colour.
- Refuse a plate that uses a mixed filament whose components are
different filament types, the type half of the GUI's
Sidebar::has_broken_mixed_filament. Missing or out-of-range components
are already rejected for the whole project by validate().
get_extruders_under_cli gains an expand_mixed_slots flag so the gate
can see mixed slots rather than their components; existing callers
keep the expanded list.
Both refusals exit with the new CLI_MIXED_FILAMENT_INVALID (-69).
A mixed filament slot is virtual: ToolOrdering::resolve_mixed_filaments()
replaces it with its physical components before any G-code is emitted, so
the toolchanges the prism has to absorb are between those components.
ensure_belt_purge_tower() counted the slot as a filament of its own,
provisioning one island per mixed slot that no swap can ever reach -- the
"extra purge tower" on MCTEST5, where filament 5 is a 50/50 blend of 2
and 4 and the G-code reports 0.00 g of it used.
Expand the assigned set with the same expand_mixed_filaments() the
backend uses, so the GUI sizes the prism against the filament set the
slicer actually produces. No-op when nothing is mixed. Test covers the
MCTEST5 shape, a mixed slot whose components are otherwise unused, and
the no-mixing case.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SsuY8Laiyh7q2zPVVKV3HZ
A build without SLIC3R_PCH had never been tried on macOS. Three files
used what pchheader.hpp happened to include: LocalesUtils.cpp needs
<sstream> and <iomanip>, and the two dialogs need <wx/tooltip.h>. The
GTK port's headers and libstdc++ pull these in transitively, the Cocoa
port's headers and libc++ do not.
# Description
Each plate keeps a registry of the instances it holds
(`PartPlate::obj_to_instance_set`). The plate's filament list
(`get_extruders`), its wipe tower preview and position clamp, the object
list grouping and the saved project's per-plate instance list all read
it. Two paths left it stale:
* `Plater::increase_instances` (the `+` key / toolbar) adds the copy to
the model but never registers it with any plate.
* `GLCanvas3D::do_move` (drag release and arrow keys) ended with
`notify_instance_update(-1, 0)`, so only instance 0 of each selected
object was re-registered. Rotate, scale and mirror already notify every
instance.
So a copy created with `+` and dragged onto another plate stayed unknown
to that plate: the project saved afterwards listed it on no plate, and a
multi-filament copy moved onto a single-filament plate drew no wipe
tower there and never got its tower position clamped. The Print side
selects instances by geometry, so the plate still sliced, which is why
this went unnoticed.
This PR
* registers new copies with their plate at creation;
* has `do_move` notify exactly the instances it moved (every instance of
the object when a part was moved in Volume mode), rather than instance 0
or all instances - notifying an instance that stayed put invalidates its
plate's slice result, so `(-1, -1)` as used by rotate would have
un-sliced every plate holding a sibling copy;
* drops the registry entry again when `decrease_instances` removes a
copy.
A second commit finishes the switch #15532 started with
`contain_any_instance_totally()`: `get_extruders_without_support()`,
`check_single_extruder_mixed_filament_risk()` and
`check_compatible_of_nozzle_and_filament()` still tested instance 0
only, so an object whose copy - not its original - sits on the plate was
skipped by all three.
No new options, no format change. The `is_new` flag is deliberately not
passed for the copies: a copy landing on a spiral-vase plate gets the
same "apply spiral mode settings?" prompt a dragged instance gets,
instead of a silent rewrite of the object's settings.
# Screenshots/Recordings/Graphs
Before:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/3cf9f5a9-1a4e-41e8-8c57-578f849d8c29"
/>
After:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/1b801a7e-b7cd-4ffb-bd1d-b701f90dade6"
/>
## Tests
Re-run after the rebase, both binaries driven through the same headless
harness (Xvfb 1920x1080, llvmpipe) on the same fixture: `cubeA`
(filament 1) alone on plate 1, `cubeB` (a two-part object, filaments 2
and 1) alone on plate 2, so plate 1 shows no wipe tower at load. Select
the plate-2 object, press `+`, walk the copy onto plate 1 with 36 x Left
(10 mm per press, one `do_move` each), save, slice plate 1.
Before is main `8af92214d0` - i.e. with #15532's
`contain_any_instance_totally()` already in place, so the only
difference is this PR.
* **Before:** the saved `model_settings.config` lists plate 1 with
`cubeA` only and plate 2 with `cubeB` instance 0. The copy (instance 1)
is listed **on no plate at all**, and plate 1 draws no wipe tower even
though a two-filament object is sitting on it.
* **After:** plate 1 lists `cubeA` **and** `cubeB` instance 1; plate 2
still lists instance 0. The plate-1 tower preview appears, and slicing
plate 1 succeeds with the tower actually generated - the filament panel
reports 1.10 m / 0.48 m in its Tower column over 51 filament changes,
and the G-code carries `EXCLUDE_OBJECT_END NAME=cubeB.stl_id_1_copy_0`.
Same camera and fixture on both runs, so the screenshots above are
directly comparable.
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
get_extruders() and estimate_wipe_tower_size() already ask whether any
instance of an object sits on the plate; the support-less extruder scan, the
mixed-filament risk check and the nozzle/filament compatibility check still
tested instance 0 only, so an object whose copy - not its original - was
placed on the plate was skipped by all three.
An instance added with "+" was never registered with the plate it landed on,
and moving an instance only re-registered instance 0 of its object, so a copy
dragged onto another plate stayed unknown to that plate's registry. The
plate's filament list, its wipe tower preview and the position clamp all read
that registry, so a multi-filament copy moved onto a single-filament plate
drew no tower there and its tower position was never clamped.
Register new copies at creation, notify exactly the instances a move changed
(every instance of the object when one of its parts moved), and drop the
registry entry when a copy is removed again.
build: clear eleven single-site clang-cl warning categories
Each of these is the last site left in its category, and every one is the
compiler saying it cannot tell what the code meant. Nothing here changes
defined behavior.
- OrcaSlicer_app_msvc.cpp printed a DWORD with %d
- StackWalker.cpp ran delete[] through an LPVOID
- ToolOrdering.cpp used a bare ; as a deliberate skip loop's body
- WipeTower.cpp had finish_block_tcr = finish_block_tcr, so the branch that
reached it did nothing. Folding the condition into the enclosing if leaves
the other branch untouched
- GCodeProcessor.cpp had an else binding to the inner if while the outer if
carried no braces
- AmsMappingPopupUpdate.cpp wrote >= 1 || <= 3 where its own comment says &&
- CalibrationWizardPresetPage.cpp left max_decimal_length unset through a
pair of conditions that cover every value but not visibly so
- DevManager.cpp bound map elements to pair<K, V> rather than
pair<const K, V>, copying every one
- SyncAmsInfoDialog.cpp had extraneous parentheses around a comparison
- Http.cpp had if (speed > 0.01) speed = speed;. speed now starts at 0 as
well, because curl_easy_getinfo leaves the target untouched when it fails
and the value reaches Progress either way
- SnapmakerPrinterAgent.cpp truncated npos into an unsigned int, so the
!= npos guard was always true. A colour with no # still yields 0, because
the wrap produced 0 as well
Nine categories go to zero. -Wtautological-overlap-compare and
-Wsometimes-uninitialized reach zero when #15583 merges their second site.
fix: report the real error when a Windows G-code export fails
copy_file built its failure message as "Error: " + errCode. Adding a DWORD
to a string literal is pointer arithmetic, not concatenation, so the pointer
lands errCode bytes into an 8-byte literal and runs past its end for any code
above 7. std::string then calls strlen on it and throws length_error, and the
catch(...) in BackgroundSlicingProcess::finalize_gcode replaces the diagnosis
with "Unknown error occurred during exporting G-code."
Every code a user is likely to hit is past the end: write-protected media is
19, no media 21, a full disk 112, and a destination held open by another
program 32. Codes 1 to 7 stay inside the literal and produce a truncated
message instead. So the "Maybe the SD card is write locked?" text has not
been reachable on Windows since this path was added in #2923.
Now that it is reachable, that guess only fits removable media, so it is
conditional on m_export_path_on_removable_media. The existing string is
untouched and keeps its 23 translations; the fixed-drive case adds one string.
Every edit makes the precedence the compiler already applies explicit. None
of them regroups an expression, so behavior is unchanged at all eight sites.
Strip parentheses and whitespace from the diff and the token stream matches.
GCodeProcessor.cpp:1472 tests == where the symmetric clause below tests !=,
which reads like a typo and is not one. A comment now explains why.
OrcaSlicer.cpp:4760 was the only judgment call. Its leading !is_seq_print is
bare while both operands are parenthesized, so the written form matches what
the compiler does. Kept rather than guessed at.
ImGui::Text and ImGui::TextColored take a printf format, so these six sites
passed data where a literal belonged. A % in that data reads a vararg that
was never supplied.
Three sites in GLCanvas3D's paint toolbar passed filament text, which comes
from the filament preset config and is user-editable. Two more passed
translated strings, where a % in any of the 23 catalogs does the same.
GLGizmoSimplify passed its progress label.
That label had been built with an escaped %% because it was being used as a
format string. Passing it as an argument instead needs a single %, so it
still renders as "42%".
ToUTF8() returns a buffer class, which converts to const char* for a named
parameter but not through varargs, so those two sites need .data().
GLGizmoSimplify.cpp:335 is unchanged, because _u8L("%d triangles") is passed
with a real argument and has to stay a format string.
The preview brim, the placement margin and the pre-generation validation
warning each decided on their own whether the tower has a Type2 cone
base, reading the wall type and cone angle three different ways. The
preview's read cast the preset's enum to ConfigOptionEnum<T>, which a
preset-shaped config never holds, so the cone base was never previewed.
estimate_wipe_tower_first_layer_outline now answers that question once,
beside the footprint estimate, from the config and the resolved planner;
all three sites take the outline from it. The libslic3r case reads the
outline off a preset-shaped config, where the old cast came back empty.
Smooth timelapse no longer charges a prime volume it does not purge. A
tower printed with no tool change is exactly the idle depth: the
stability minimum for Type2, the wrapping detection depth for Type1.
Charging a full prime_volume on top made the previewed and arranged
tower deeper than the one that is printed.
The Type2 half of "a tool change reserves a tower whatever the purge
volumes resolve to" arrives with the base commit; here it only has to
survive the planner split, since Type1 already reserves per filament.
The wipe tower filament only joins the tool ordering when there is a
tower to join, which is the has_wipe_tower() half of the guard
Print::extruders applies.
harrierpigeon