* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
import_presets reduced each zip entry to a basename by stripping only
'/', so on Windows an entry named with '\' separators kept its
directory components and was extracted wherever they pointed. Strip
both separators, and reject any entry whose name still escapes the
extraction folder.
The preset name from the JSON and the bundle id from
bundle_structure.json were joined onto the preset directory unchecked
as well, which let either of them write outside it on every platform.
Both are now validated before anything is written.
The check is the is_path_within_root helper the 3MF importer already
had, moved to Utils so both importers share it. It treats '/' and '\'
as separators on every platform, so a bundle that would escape on one
OS is rejected on all of them.
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Using bbs versioning for bbs atributes
* Orca tags
* Bump SLIC3R version to match current BBS
* New import logic
* to_string_sf
* 2.3.2 No tagged
* Update comment
* identified code for snapping to buidlplate
* rename internal name to ensure_on_bed to be consistent, saves option in 2mf, finish Move UI, use in both ensure_on_bed() functions
* makes auto_drop a per-object setting, removes global setting
* remove adUndef, add auto_drop to constructor/serialize
* fixes drop() button
* add "auto_drop" checkmark to "load as single object" dialog,
nothing changes if auto_drop == yes || "load as single object",
if auto_drop == false and "load as single object" == false the objects now retain their relative position to each other
* retains auto_drop (and printable) state when assembling or splitting objects,
adds ObjectList::printable_state_changed() overload to be able to only provide ModelObject* vector
* adds dialog when splitting to ask if auto_drop should be disabled,
only shows when auto_drop enabled and atleast one volume floating
* adds arrow indicator on bounding box if auto_drop == false
* removes unneeded code, keeps "auto_drop" naming consistent
* makes for loop simpler in set_printable, set_auto_drop and get_auto_drop,
makes get_auto_drop const,
fixes wording in Snapshot text
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
(cherry picked from commit ed9816397374116db37c2a76d11e0216df5aca1d)
* SPE-2486: Refactor function apply_mm_segmentation() to prepare support for fuzzy skin painting.
(cherry picked from commit 2c06c81159f7aadd6ac20c7a7583c8f4959a5601)
* SPE-2585: Fix empty layers when multi-material painting and modifiers are used.
(cherry picked from commit 4b3da02ec26d43bfad91897cb34779fb21419e3e)
* Update project structure to match Prusa
* SPE-2486: Add a new gizmo for fuzzy skin painting.
(cherry picked from commit 886faac74ebe6978b828f51be62d26176e2900e5)
* Fix render
* Remove duplicated painting gizmo `render_triangles` code
* SPE-2486: Extend multi-material segmentation to allow segmentation of any painted faces.
(cherry picked from commit 519f5eea8e3be0d7c2cd5d030323ff264727e3d0)
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* SPE-2486: Implement segmentation of layers based on fuzzy skin painting.
(cherry picked from commit 800b742b950438c5ed8323693074b6171300131c)
* SPE-2486: Separate fuzzy skin implementation into the separate file.
(cherry picked from commit efd95c1c66dc09fca7695fb82405056c687c2291)
* Move more fuzzy code to separate file
* Don't hide fuzzy skin option, so it can be applied to paint on fuzzy
* Fix build
* Add option group for fuzzy skin
* Update icon color
* Fix reset painting
* Update UI style
* Store fuzzy painting in bbs_3mf
* Add missing fuzzy paint code
* SPE-2486: Limit the depth of the painted fuzzy skin regions to make regions cover just external perimeters.
This reduces the possibility of artifacts that could happen during regions merging.
(cherry picked from commit fa2663f02647f80b239da4f45d92ef66f5ce048a)
* Update icons
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Make the region compatible check a separate function
* Only warn about multi-material if it's truly multi-perimeters
* Improve gizmo UI & tooltips
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Kris Austin