G-code post-processing is now a step of the slicing-pipeline plugin rather than a
separate capability type. One capability class can transform slices at the geometry
seams AND edit the final G-code, behind a single picker/option.
- Add SlicingPipelineStepPlugin::psGCodePostProcess (bound as
orca.slicing.Step.psGCodePostProcess). Unlike the geometry steps it fires from the
GUI export path in PostProcessor.cpp, not from Print::process(): ctx.print/ctx.object
are None and the plugin edits the file at ctx.gcode_path in place. It may run more
than once per slice (file export and/or upload) and its output is not shown in the
preview.
- Extend SlicingPipelineContext with gcode_path/host/output_name and a C++-only
full_config; config_value() falls back to it when there is no live Print.
- PostProcessor.cpp dispatches SlicingPipelinePluginCapability at psGCodePostProcess,
driven by the existing slicing_pipeline_plugin option.
- The exported G-code lives outside data_dir(), so the plugin audit sandbox would
block the write; the trampoline's audit setup grants ctx.gcode_path's folder as a
scoped allowed root, gated on a non-empty gcode_path so the geometry-step hooks gain
no extra filesystem access.
BREAKING CHANGE: the separate G-code post-processing capability type is removed.
- orca.gcode.GCodePluginCapabilityBase and orca.PluginType.PostProcessing are gone;
post-processing plugins migrate to orca.slicing.SlicingPipelineCapabilityBase +
Step.psGCodePostProcess (and gain ctx.params / ctx.config_value()).
- The post_process_plugin config option is removed; use slicing_pipeline_plugin.
Presets carrying the old key degrade to the standard unknown-key warning.
- Manifest type = "post-processing" now maps to Unknown (advisory only; the loader
dispatches on the C++ get_type()).
Also repairs two latent build breaks the branch carried: stale Step enum value usages
in test_slicing_pipeline_hook.cpp and a reference to the removed
ConfigOptionDef::PluginType::None in Tab::on_value_change (now is_plugin_backed()).
Adds the orca_gcode_stamp sample plugin and a psGCodePostProcess binding test.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Fix junction deviation and jerk settings behavior
Process settings now follow the selected printer's junction deviation
configuration. When machine_max_junction_deviation is enabled,
default_junction_deviation is shown and jerk settings are hidden. When
junction deviation is disabled, jerk settings are restored and
default_junction_deviation is hidden.
Fix a validation issue where junction deviation mismatch warnings could
be reported even when machine_max_junction_deviation was set to 0.
Warnings now apply only when junction deviation is active and point
directly to default_junction_deviation.
Also simplify Motion ability page visibility checks by reusing local
firmware-flavor booleans.
* GUI tweak
- separate Junction Deviation segment
- JD and Jerk stay visible
* Add Optimized Gyroid infill (auto-tuned wavelength + amplitude)
New infill geometry derived from FillGyroid. Two parameters are
auto-computed per-region from density, line spacing, and layer height
(no user inputs):
omega = sqrt(density_adj) / sqrt(1 + layer_height/spacing)
clamped to [0.5, 2.0]
-- Euler-Bernoulli buckling: critical load ~ 1/L^2,
so shorter wavelength under higher load (denser infill)
raises buckling resistance.
amplitude = 0.55 / omega^2, clamped to [0.20, 0.65]
-- Curved-beam bending stress: peak stress ~ A * omega^2,
so amplitude is reduced as omega rises to keep peak
fiber stress bounded while preserving stiffness.
Files:
- src/libslic3r/Fill/FillOptimizedGyroid.{hpp,cpp} (new)
- src/libslic3r/Fill/FillBase.cpp (factory case)
- src/libslic3r/Fill/Fill.cpp (switch case)
- src/libslic3r/Layer.cpp (switch case)
- src/libslic3r/PrintConfig.{hpp,cpp} (enum + label)
- src/libslic3r/CMakeLists.txt (build sources)
User-facing: appears as "Optimized Gyroid" in the Fill Pattern dropdown.
Density still chosen by user; omega/amplitude are internal.
* Fix build: layer_height is in FillParams, not Fill base
* Add ipOptimizedGyroid to multiline infill list in ConfigManipulation
* Refactor: replace ipOptimizedGyroid enum with gyroid_optimized boolean
Per @RF47's review feedback, fold the optimized wave math into FillGyroid
itself behind a per-region boolean instead of a separate infill enum.
What changes:
- New ConfigOptionBool "gyroid_optimized" on PrintRegionConfig (default
false). When unchecked, gyroid behavior is byte-identical to before.
- Optimized wave math (compute_omega_factor, compute_amplitude_factor,
f_opt, make_*_opt, make_optimized_gyroid_waves) lives inside
FillGyroid.cpp. _fill_surface_single branches on params.gyroid_optimized.
- FillParams gains a bool gyroid_optimized field, populated in Fill.cpp
from region_config alongside fill_multiline.
- UI checkbox added under Strength > Infill in Tab.cpp, label
"Optimize gyroid wave (experimental)". Toggle is hidden by
ConfigManipulation when sparse_infill_pattern != ipGyroid.
- "gyroid_optimized" added to s_Preset_print_options for preset I/O.
What goes away:
- ipOptimizedGyroid enum value, factory case, switch cases, dropdown
label, string key.
- FillOptimizedGyroid.cpp / FillOptimizedGyroid.hpp (math moved into
FillGyroid.cpp).
- Net diff drops by ~250 lines.
Existing profiles using gyroid are unaffected.
* Wire gyroid_optimized through SurfaceFillParams to FillParams
Linux build failed because line 921 in Fill.cpp populates a
SurfaceFillParams (the dedup struct), not FillParams directly.
Add the field there, in operator< / operator==, and copy it to
FillParams at both conversion sites.
* Use toggle_line for gyroid_optimized: hide row when pattern != gyroid
* Account for multiline wall thickness in omega correction (per @RF47)
When fill_multiline = N, each gyroid wall is N lines thick, so the
geometric scale fed into the buckling correction term should be
spacing * N rather than spacing. Increases omega (tighter wavelength)
when multiline is enabled, consistent with the thicker wall being
more buckling-resistant.
* Optimized gyroid via marching squares on the implicit scalar field
Per @RF47 review: replace the analytical f_opt / make_one_period_opt
wave generator (which had visible kinks at vertical-horizontal
transitions) with a marching-squares iso-extraction on the gyroid
scalar field, modeled on FillTpmsFK.cpp.
- New marchsq::GyroidField in FillGyroid.cpp evaluates
F(x,y,z) = sin(fx*x)cos(fy*y) + sin(fy*y)cos(fz*z) + sin(fz*z)cos(fx*x)
where fx = omega * baseline (anisotropic in x), fy = fz = baseline.
- get_gyroid_polylines() runs marching squares at iso=0 and converts
rings to polylines.
- _fill_surface_single() optimized branch now builds GyroidField,
runs marching squares, and skips the bb.min translate (field
output is already in absolute coords).
- Dropped: f_opt, make_one_period_opt, make_wave_opt,
make_optimized_gyroid_waves, compute_amplitude_factor. Amplitude
has no clean analog in iso-zero extraction.
- Standard (non-optimized) gyroid path unchanged.
* Mass calibration: compensate period by cbrt(omega) for x-anisotropic field
Per @RF47: optimized vs standard gyroid had different masses at the
same sparse_infill_density setting. Cause: scaling fx by omega while
leaving fy=fz at the baseline raised the surface-area-to-volume ratio
by approximately omega^(1/3) (the geometric mean of the three
frequencies).
Fix: multiply the base period by cbrt(omega) so the geometric mean of
(fx, fy, fz) returns to the standard baseline. Net effect:
fx = omega^(2/3) * baseline_orig
fy = fz = omega^(-1/3) * baseline_orig
which preserves total mass at the same density setting while
preserving the load-direction anisotropy this PR introduces.
* Switch optimized gyroid anisotropy from X to Z (per @RF47)
Z is the typical compression-load axis for FFF parts and is not at
delamination risk under compression — so the dominant failure mode
is column buckling of the vertical strands themselves. Tightening
fz directly shortens the effective vertical strand length, which
improves Z-axis buckling resistance.
Mass calibration via cbrt(omega) period compensation still applies
(scaling exactly one of three frequencies by omega; the geometric-
mean preservation argument is symmetric across axes).
* Update src/slic3r/GUI/Tab.cpp
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Address review feedback (Copilot + @RF47)
- Fill.cpp: gate params.gyroid_optimized on (params.pattern == ipGyroid)
so non-gyroid surfaces don't differ in SurfaceFillParams by an
irrelevant flag (would unnecessarily split fill batching).
[Copilot suggestion, RF47 confirmed correct]
- PrintConfig.cpp: drop "amplitude" from the tooltip; only wavelength
is parameterized (the marching-squares iso=0 extraction is invariant
to a uniform field scale, so amplitude has no effect).
- FillBase.hpp: shorten gyroid_optimized comment to match the actual
carried state (no amplitude term).
- FillGyroid.cpp: shorten the marchsq namespace comment block; the
ODR concern was overstated (FillTpmsFK uses the same pattern fine).
* Drop redundant marchsq bb expansion (Copilot)
bb is already offset by 10 * scale_(spacing) above for edge-artifact
margin; the second offset on bb_field doubled the raster area for no
geometric benefit and hurt CPU time on large parts.
* Update src/slic3r/GUI/Tab.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Fix density mismatch + rename to Z-buckling bias optimization
Issue (per @ianalexis): at the same sparse_infill_density setting,
the optimized branch produced denser fill than standard. Verified via
Python sim (sim_gyroid_compare.py) using marching squares on the
implicit field across multiple z slices.
Root cause: the omega formula was inverted from the buckling-physics
intent. The naive sqrt(density_adj) factor produced omega < 1 at
typical print densities (10-30%), which LENGTHENED the Z wavelength
instead of shortening it -- net loss in both mass and strength.
Fix:
- compute_omega_factor: invert to sqrt(1 / density_adj), clamp to
[1.0, 2.0]. Now omega = 2.0 at low density (long strands need
most help) and clamps to 1.0 above ~30% density (no-op, since
standard gyroid is already short enough).
- Remove the cbrt(omega) period compensation. Empirically (sim
table embedded in FillGyroid.cpp comment) the inverted formula
keeps line length per area at ~1.000 of standard across all
densities with no period scaling needed.
Predicted gains (sim, Z-axis Euler buckling proxy):
density line/std strength/std
10% 1.000 2.84x
15% 1.000 1.89x
20% 1.000 1.42x
30%+ 1.000 1.00x (no-op)
Rename per @ianalexis: "Optimize gyroid wave" oversells (now no-op
above 30% density and Z-only). Renamed user-facing label to
"Z-buckling bias optimization (experimental)" with updated tooltip
that scopes to vertical compression and discloses the density cutoff.
Internal config key (gyroid_optimized) unchanged for diff size.
Real-world Instron compression tests at Brown's Prince Lab to follow.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fix a regression that second extruder settings not properly handled for H2D/X2D (OrcaSlicer/OrcaSlicer#13559)
The problem here is how it deals with comparasion between signed & unsigned unmbers. It will convert both into unsigned then do the comparasion,
which means when `extruder_id` is `-1` (which is a valid value, means all extruders), it will be treated as `0xFFFFFFFF` which is obviously greater than `nozzle_volumes->size()`
then be reset to `0`. So when the parameter dialog is built (which will call this function with `extruder_id=-1`), only the first extruder will be set to the correct variant index.
* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fixed PrintConfig.hpp order so Repetier outputs, updated ConfigWizard to use gcode_flavor value rather than static
Add Repetier to enum values and labels
Update to add Repetier base profile to the setup wizard
Re-order gcode_flavors in PrintConfig.hpp and PrintConfig.cpp to match
Revise ConfigWizard.cpp to use gcode_flavor rather than list order
Add Repetier profiles and include in custom.json (profile disables m73 and stop emit machine limits which Repetier doesn't use)
* Fix JSON formatting in Custom.json
* Add support for pressure advance in Repetier flavor
* Add Repetier flavor show motion ability tab is visible
* Refactor jerk handling for Repetier flavor
* Update resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update resources/profiles/Custom/machine/fdm_repetier_common.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* add back localisation flag for Klipper
* tidy up indentation and braces
* Space indentation for Repetier profiles changed to tab
* Fix space indentation in Custom.json file for Repetier profiles
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Warn for first and other layers big temperature delta
Warn user if temperature differences (first layer vs other layers) for nozzle and plates are above a certain delta.
Co-authored-by: SoftFever <softfeverever@gmail.com>
