Selecting the web Device tab loaded the printer's web UI from the selected discovered machine
when the preset carried no host. That arm was lost merging main into this branch — two of the
three Plater.cpp hunks from #15134 survived, this one did not — leaving the tab blank, since
PrinterWebView starts on an empty URL and nothing else navigates it.
Per material slot, the Publish dialog can now embed the entire filament preset ("Full Publish") and require a curated filament type and/or colour:
- On export, full-publish vector options are masked to the author's slot so unrelated slot data never leaks into the published file.
- On load, slots are matched by the published type: a match keeps the receiver's material (full dumps ignored, partial keys applied); a mismatch replaces the slot with the first visible same-type library filament, falling back to a temporary embedded preset or skipped keys when none exists. Required colours apply regardless of the type match.
- The receiver's slot count grows only to the highest published slot.
- Published 3MFs load as a new project: the file's path is not adopted as the project filename, published metadata is stripped from the model, and the file is added to recent projects.
- Notifications list replaced slots, and the edited filament preset is refreshed so applied values surface in the GUI.
- Dialog: "Full Publish" toggle replaces the material opt-in and select-all headers; new Color/Type requirement rows with swatches.
- Add Ctrl+Shift+E shortcut for the Publish dialog (menu, key handling, and the keyboard shortcuts dialog).
- Tests for export slot masking, metadata round-trip, replacement semantics, slot growth, and skipped-key reporting.
Review follow-up. Removing pem from the ghost cache key also removed its
accidental role as the key's only printer-identity signal: the resolved
active-tools string (roster + primary) and imex_firmware_managed_zones both
shape the baked zone/ghost set but were never keyed directly, so a printer
swap between presets with matching mode names and topology could leave a
stale ghost set. Key all three in build_imex_cache_key, which also hardens
the zone cache against the same pre-existing gap.
Also from review: the tooltip swatch reuses the pem/map its label already
hoisted (one resolution, not two); the bake constructs ghosts with no color
at all, making update_imex_ghost_colors the sole color author; the headless
!m_plater guard is documented as the wxGetApp sentinel it is.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Reopening a saved CAD design ended on a modal "The file does not contain any
geometry data." warning. A CAD project legitimately carries no mesh — the model
lives in the feature tree (Metadata/SnapOrca_cad.bin) until Commit to Plate — so
the warning is false for one, and it is the last thing the user sees after
opening a design they spent an hour on. It reads as "your work is gone" at the
exact moment the recipe HAS just loaded and the Design tab is about to rehydrate
it, and the main window sits disabled behind the dialog until it is dismissed.
Counts a non-empty model.cad_recipe as geometry.
Verified on the rig: save without Commit to Plate, reopen, and the Design tab
comes up with Sketch1 -> Extrude2 -> Body 1 editable, with no dialog at all.
Fix Windows crash in Replace all with 3D file
Keep the replacement result message as wxString and substitute the volume
name directly.
On Windows, wxString::ToStdString() cannot encode the Unicode status icon
through the active ANSI code page and returns an empty string. Passing that
empty string to boost::format with a volume-name argument throws
boost::too_many_args and exits OrcaSlicer.
Non-belt branch of set_bed_shape reset only the 3DBed renderer, not the
BuildVolume; Bed3D::set_shape early-returns on unchanged bed, so a
belt->normal switch or in-place belt toggle-off left the BuildVolume with
m_is_belt_printer=true and inflated Y bounds -> out-of-bounds objects
treated as printable on a normal printer.
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
Labels, tooltips, menu items and dialog text mixed "IDEX/IQEX" with "IMEX"
for the same feature. IMEX is now the user-facing name throughout: IDEX and
IQEX are hardware categories, IMEX is the feature spanning them. The
hardware terms remain only where they help a user tell whether the feature
applies to their printer.
Comments and log messages keep IDEX/IQEX, where the specific carriage
topology is the more precise term.
Also corrects the imex_parallel_mode tooltip, which pointed at a
"Printer -> IDEX/IQEX tab" that does not exist; the options live under
Printer -> Multimaterial -> IMEX Configuration.
None of these strings appear in any .po or the .pot, so no translation is
affected.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
IMEX placement validation only walked model instances. The prime tower is
not a ModelObject, so it could sit in a secondary zone or a carriage
collision strip and slice with no warning -- on mirror mode, a carriage
crash. Span (paired-gantry multicolor) is what made towers reachable in
parallel modes, so this is a gap in that feature, not inherited breakage.
The check now returns a cause instead of a bool so the message can name the
offender, and the tower and per-instance paths share one predicate,
imex_hull_violates_zones(), moved to libslic3r and covered by tests.
Overlap is area-based: a hull flush against a zone boundary is legal, only
a crossing violates. The tests pin that in both directions, since switching
to a touch-based test would silently block placements that work today.
The tower footprint comes from the same estimate the scene draws, so
validation matches what the user sees and drags. Three config reads there
are load-bearing in non-obvious ways and are commented at the point of use.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings the belt-printer work up to date with 591 upstream commits.
Conflict resolutions (12 files, 42 hunks):
- GCode.cpp: adopted upstream's per-filament/per-nozzle config refactor
(get_filament_config_index, NOZZLE_CONFIG), the extracted
generate_timelapse_gcode + farthest-point timelapse, and the
ConfigOptionFloatsNullable calibration options. Re-applied the belt
hooks on top: init_belt_writer / axis remap / FirstLayerPlane setup,
on_set_origin, the belt-corrected calib_z for the volumetric speed
tower, and path_on_first_layer (belt's per-path first-layer test) in
place of upstream's layer-index on_first_layer() in the acceleration,
jerk and overhang-detection paths. Swept upstream's new m_writer.
uses to m_writer-> since belt holds the writer by unique_ptr.
- interpolate_value_across_layers: kept upstream's banded stepping and
belt's object-Z-span ratio; dropped upstream's duplicate ratio decl.
- Plater.cpp: took upstream's guarded add_model(...) early-returns and
the VFA vfa_layer_height plumbing; kept the belt temp-tower path,
_calib_apply_belt_mode and belt_calib_flip_ringing_tower. Dropped the
VFA "cut upper" block, superseded upstream by model scaling.
- Brim.cpp: upstream's ObjectInstanceID-keyed brimAreaMap, keeping the
belt early-return.
- 3DScene.cpp: kept both the belt build-plate tilt up_direction and
upstream's per-extruder printable-height shading.
- GCodeViewer.cpp: kept upstream's dim-previous-layers setup and belt's
exemption from the same-result early return.
- TreeSupport.cpp: upstream's >= 0 roof-layer fix inside belt's
belt-floor branch.
- calib.cpp / GCode.hpp / GCodeWriter.{cpp,hpp} / Print.hpp: upstream's
additions adapted to belt's pointer-held writer and helpers.
- Custom.json: kept profile version 02.04.00.03 (belt) over upstream's
02.04.00.01; both bumped from 02.04.00.00.
Building this tree needs the wxInspector dependency, which upstream
added in the interim (python3 and wxWidgets 3.3.2 were already present
in the shared deps prefix).
* For dialog without explicitly `SetMinSize`, we should use `SetSizerAndFit` instead, otherwise the dialog will not show correctly on GTK3. (OrcaSlicer/OrcaSlicer#14561)
- and if `SetSizer` is called before the full layout has been built, then an extra `SetSizeHints` should be called before layout/fit so the min size can be properly set automatically based on children's min sizes accordingly.
* Fix GTK3 dialog min size: SetSizer → SetSizerAndFit for dialogs without explicit SetMinSize
Replace SetSizer() with SetSizerAndFit() in 11 dialog constructors that
neither call SetMinSize() nor SetSizeHints(), ensuring proper minimum
size propagation from child widgets on GTK3.
SetSizerAndFit internally calls sizer->SetSizeHints(window), which
sets the window's minimum size based on children — the same fix
applied to ProjectDropDialog in 8a7662083e.
Also drop sizer->Fit(this) calls where present, since they only
resize but don't set the min size hint needed by GTK3.
Co-Authored-By: Claude <noreply@anthropic.com>
* Update code style
* Update TroubleshootDialog.hpp
* Fix unsaved preset dialog layout
* Fix MsgDialog layout
* Fix other 3 instances in MsgDialog.cpp
* Fix a few more instances
* Fix printer option dialog too big on Windows
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Catches the fork up from 449a4cf9fc (2026-06-28) to d6cb667b89 (2026-07-24).
Upstream touched 2326 files; 17 of them overlap the 164 this branch touches.
16 of the 17 auto-merged, including all three CMakeLists.txt, the build_all.yml
CI workflow, and every GUI file. The CAD core never conflicts: CadDocument,
SketchEngine, SketchSolver, McpControl and test_caddocument are files this fork
adds, so upstream does not touch them.
The one conflict, tests/libslic3r/test_3mf.cpp, was purely additive in all three
hunks and is resolved as a union: our test pinning that store_bbs_3mf embeds the
CAD recipe as Metadata/SnapOrca_cad.bin, upstream's multi-nozzle plate-metadata
round-trip tests, and both sets of includes. All three were verified present
after resolution rather than assumed.
NOT BUILD-VERIFIED, for a reason that predates this merge and is not caused by
it: this fork cannot be configured on nativedev at all. Its CMakeLists has
required Eigen3 5.0.1 since before the merge (line 592 pre-merge), while the
only deps image on the machine is snaporca-deps, built for snaporca's
find_package(Eigen3 3.3). CMake fails at configure, so nothing compiles.
That means this fork's Catch2 suite has never run. Every "suite green" figure
recorded for M1-M8 was snaporca's suite; the ports were verified by patch-apply
plus the CAD sources being byte-identical to snaporca's. Building an orca_cad
deps image with Eigen 5.0.1 is what would finally close that gap.
Pre-merge state is preserved at branch cad-mainline-pre-upstream-2026-07-25
(30d54f0074).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Lam Wei Lun