Jira: none
extrude 5 mm in place before drawing the pre-extrusion line
to ensure the filament stick to bed
add a dirty detection feature for carmera
support dual-head high-low temp check
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia365d99fe764acf4815d24cfb96532b6f1d79990
(cherry picked from commit d17f5586103e4b87c8ae875846253658afb6e42d)
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
(cherry picked from commit 16813aa46092343c70681f3145a4f402ff415042)
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
(cherry picked from commit 5c3d804b9fbe65532d2717e60b5f1143710b0ecf)
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
(cherry picked from commit fff787345625a0031934e609b1b3709e39decd4a)
So objects are auto arranged near the chamber fan.
jira: none
Change-Id: Ia7c76c0b048fad51728d2b24c9dd6530c8c30497
(cherry picked from commit 0f37893bea4961e1461df0c55bb4ad95bd4fb17f)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
recover the y position when timelapse gcode end
jira:none
Change-Id: I80b9b65395722e0190aa7d50bb064e095d8ec09d
(cherry picked from commit db5e28ddaa1d4d7c58888d817dd77c176556e106)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
(cherry picked from commit 16cadec565f987e6baae97428d5392c1f8e7ad39)
The following Bambu filaments have been added:
- Bambu PLA Wood
- Bambu PLA Silk+
- Bambu PC FR
- Bambu PETG Translucent
Additional variants for the above filaments have also been added, including versions for different nozzles and printers.
The filament vendor for Fiberon PA612-CF has been corrected from "Bambu Lab" to "Polymaker."
* fixed logic error in PLA jamming gcode for P1S
* Fix use after free bug in LinesBucketQueue::emplace_back_bucket
I found a use after free bug in LinesBucketQueue::emplace_back_bucket. This was found by enabling address sanitizer.
The LinesBucketQueue class has two related members:
std::vector<LinesBucket> line_buckets;
std::priority_queue<LinesBucket *, std::vector<LinesBucket *>, LinesBucketPtrComp> line_bucket_ptr_queue;
line_bucket_ptr_queue holds pointers into line_buckets. However, since items are inserted into line_buckets one at a time, existing pointers that were stored inside line_bucket_ptr_queue become invalid. Specifically:
void LinesBucketQueue::emplace_back_bucket(ExtrusionLayers &&els, const void *objPtr, Point offset)
{
auto oldSize = line_buckets.capacity();
line_buckets.emplace_back(std::move(els), objPtr, offset); <--- Causes a reallocation, making previous pointers invalid
line_bucket_ptr_queue.push(&line_buckets.back()); <-- priority queue compares against old, now invalid pointers
...
The proposed fix is to calculate the required number of entries in ConflictChecker::find_inter_of_lines_in_diff_objs, and then calling line_buckets.reserve(count). This ensures that sufficient buffer is allocated up front and the pointers are stable as items are added.
* Updated to fix the handling of the capacity change, and removed the code I previously added to reserve upfront since it is not really needed
* Remove accidentally added whitespace
* Removed unused method
* ENH:add mz_zip_reader_extract_to_file_w api
to solove plugin install failed problem by special wide char
jira: none
Change-Id: Ic7d3efe3fdf852387650abf9df65803da9e46a60
(cherry picked from commit b68ad03717a63675fef2f3ef73d4058bf311adea)
* FIX: PrinterFileSystem report real connect error
Change-Id: I99d6ff7f6dcb1f53ccf59854f5f19d0bd39fa9fc
Jira: none
* rename preference name
* FIX:Relax restrictions on importing obj files
jira: none
Change-Id: I61a0156a8424a5f59922956918d37d38e2c3306a
* FIX: [6469] popup dialog too mach when reload object
Jira: 6469
Change-Id: I4097e3a3b018c7a676fea93bf63f8f778bb3148b
* FIX:fixed incorrect display of printer options page on Linux
jira:[STUDIO-6220]
Change-Id: Id1f084658b0b340b7f17ab97ba82c0fd3ae83fae
* FIX: handle exception of dividing by zero in arranging
jira: none
Change-Id: I0d20464dbe81a80293539100f06d72dee456a27b
(cherry picked from commit 94746ae9bf7f467243849570450567b4fdc78e3a)
* ENH:delete no use code
jira: none
Change-Id: I40e7ffa7ea47bb3cd4039eef9f6c28c604eb3abc
* FIX: PrinterFileSystem::FileRemoved
Change-Id: I891aaa8d58ff379dc1ebd8581064865a33388f74
* FIX: resend ttcode to printer on -90 error
Change-Id: I96dc45102a2759a9f1a0002f42c3a91b2c6b2d75
Jira: STUDIO-5947
(cherry picked from commit 97d687b7c88f8cd51b8eddd39120349d8eac42b1)
* FIX: fix some issue in multi machine
JIRA: STUDIO-6934 STUDIO-6888
1. Fix the issue of incomplete display caused by excessively long file names
2. Fix the issue of icon display being too large
3. Fix the issue of garbled Chinese characters in the task list
Change-Id: I36bc10bf2067f44aaa7e3651b58e526ea323c8ad
* FIX: Incorrect multiplier, when the multiplier is set to below 1
github: #3987#3805
1. In some languages that use commas as decimal points, setting multiplier below 1 will resolve to 0
2. Unable to save multiplier correctly
Change-Id: I62bc55e270929ebb5e910eb79c6f97106e842b93
* Arrange
* FIX: wrong wipe tower when open 3mf file
1.wipe tower pos in 3mf was overwritten by default pos when opening 3mf
with a different printer profile.This patch fix it
jira: STUDIO-5890
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I12e5d4b80a0ad86194db0682c1763ba4a9492521
* ENH: update A1 machine gcode
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
* FIX: minor spelling mistake in gcode
github:#3477
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id3201bf8b8125ce060e2cac102ab2525877e27c1
* FIX: slice crash with height_range
github: 3917
Change-Id: Icdf83013213b47935b7a795ed75cc3d49057665d
* FIX: ERROR_RES_BUSY text
Change-Id: Ifde1a7b0c6ab915eb226c2072c46edd40f60cf9a
Jira: STUDIO-6436
* ENH:Unable to send printing without selecting a device
jira:[STUDIO-6850]
Change-Id: Ic537579727fd1618af364db93fce8fbbe4cd635a
* FIX:add exit_gizmo before slice model
jira: STUDIO-5531
Change-Id: Icddc9d73b3d91bb68e9768d13e48cbae0680e58e
* FIX: PrinterFileSystem report real connect error
Change-Id: Id6750cfa2a98fe8325ba677dabb606a0a701b495
* FIX: add can slice judgement in slice all plates processing
jira: STUDIO-6325
Change-Id: Ic7fb8cef000c03210bb77289a570ee6b60b6083e
* FIX:Fixed error in displaying the name of Bambu filaments
Change-Id: Ib42194c07b6eefe793eec81a588debc9d622d951
* FIX: text hidden in calibration tab
jira: STUDIO-6264
Change-Id: I24fbc590638a3213d948a973422e010486113923
* FIX: logic error in PLA fan control
github PR: #3948
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe
* FIX:upgrade cluster algorithm to remove duplicate labels
jira: none
Change-Id: I4d68d8cd8e080932c7c308bc8f69e27546ffe309
* FIX: can not parse json float in ES on macOS
jira: STUDIO-5889
Change-Id: I622f4b474c378d77b0e43d67a320f023be2d5811
* ENH:Clear the value of the previous nozzle type
jira:[for nozzle check]
Change-Id: I9a932b833fb07de6cb0a91abe6372b0e91f273f1
* ENH: update A1 gcode
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
* FIX: the height range is not valid in assemble object
github: 3876
Change-Id: Id38672bbf0c01bc9b9f0a3e2bf1052d945b45131
* FIX: calibration page text hidden in linux
jira: STUDIO-6264
Change-Id: If210abf64057eb2e9c2c5b11d41fa33f18684c72
* ENH:clear nozzle information
jira:[STUDIO-7050]
Change-Id: I15ca4973d09132ddb5cb5a56bedd795ba6976b27
* update plugin version
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: afriede <me@afriede.dev>
Co-authored-by: Momin Al-Ghosien <momin@sanestudios.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
