In gcode processor, the result check, increased the tolerance of printable area detection to 2mm, to adaption to the requirement of command line slicing.
jira: none
Change-Id: I5be4d6396989c35ae394339376c1133c8862c075
(cherry picked from commit 2f09c98caa9d2afc3e33a0bf17c6a6bb39992e0c)
Added option information to the error prompt to facilitate users to jump to the corresponding option
jira: none
Change-Id: I3f13acac08a1e84625dc22363822989f1eab7ec7
(cherry picked from commit 96b4e6610fa532b74247abe925d8c8d19869bf93)
Add warning about enable_wrapping_detection without prime tower. Note: Only one of this warning, check_multi_filament_valid, and support_enforcer without support can be displayed at the same time.
jira: none
Change-Id: Ic8f0fc7ab62b63af1604e32b7380642741669462
(cherry picked from commit 698c0d16c99e13244101c06d7a3a8ff66ae2e4d0)
0-sized extrusion path are now excluded from the heated bed range check to avoid false positive detection.
jira: none
Change-Id: Ia4bfff77880d107ce6b9542ef770050201ff0d90
(cherry picked from commit 00d9aedabed7e6b25767ddfe9871488f629c0dde)
erCustom extrusions are now excluded from the heated bed range check to avoid initial routing issues.
jira: STUDIO-13885
Change-Id: I706a85113fe7b6f5e1a3b67f5bc16d674ad85577
(cherry picked from commit c8b4f3c778a3c1a023693b9b4961da261507ae8f)
Added a check for Gcode traces outside the printable area after the backend slicer, allowing command-line slicers to detect abnormal results. The GCodeProcessor's m_result.gcode_check_result.error_code now includes not only dual-head print range checks, but also checks for the machine's plate print range, wrapping detection area, and height violations.
jira: none
Change-Id: I44072ece3b4b525c77328cec2f76e205eb559cc4
(cherry picked from commit 054f936243968687f536170374a233ec912e8e42)
Because the function in print.cpp mistakenly considers models with different variable layer height configurations to be the same, the layer height configurations of the copied objects are optimized and overwritten. Fixed function: auto is_print_object_the_same = [this](const PrintObject* object1, const PrintObject* object2)
jira: STUDIO-13507
Change-Id: Ic4b3a479e8984b46a2f9557f65826951b8979646
(cherry picked from commit 2d5137914e9699c4fe9ddbbc76f13b85dbc3a1a9)
In print.cpp, logic was added to skip checking for mixed prints when using the byobject mode. This prevented false positives for single-filament objects, but it also failed to detect mixed prints. This detection has been restored, but separate logic for byobject mode has been added to the detection function: StringObjectException Print::check_multi_filament_valid(const Print& print). This will only prompt a warning when a single object contains high- and low-temperature filaments.
jira: STUDIO-13667
Change-Id: I37622e49b76581ea4a2d78c97ebcd655bb7199e6
(cherry picked from commit 7128758056f1fe11bdd953e7f3d91284b15535a9)
Due to the decimal portion of floating-point numbers generated during square root extraction, mismatched matrix sizes were mistakenly considered consistent, resulting in the flush matrix size not being corrected. Now we compare the square value to avoid errors.
jira: STUDIO-13727
Change-Id: I1f3768dab186b25c9ac4e85d4eff24913f15b3dc
(cherry picked from commit d0e9a8c3f3086b4ad2bc14bbfebd3d6ceff9eefc)
change: Multiply the flush_volumes_matrix in the exported gcode by the coefficient and output the final value.
Also fixed the issue where the flush matrix page was limited to 900, but the Gcode output value could be greater than 900 (the product of the matrix and the multiplier was limited to 900 before storing the value)
jira: STUDIO-13332
Change-Id: I893f27bec206c3b9da3273241d1cd5f1883e55a9
(cherry picked from commit 8aa91cd86c8c75b3736c616bcfbed4872db9734c)
(cherry picked from commit 038fc1c18220cef8c269d272059afea503fb5d5b)
1. Use the minimum flush between nozzle volume and flush in datalist
2. Add a new param to decide the datalist to use
github:7445
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id87c98ca5069e7b328974d641d7a81dfbf9c50a0
(cherry picked from commit 2be29b784727330732170b5c2ff0ba9d5e79d82f)
1. Sometimes the first layer is too small and does not have enough space to extrude.That will make first layer extruders empty
jira: STUDIO-13030
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I69b99ab74101c772f4c91e955060e403988bb91c
(cherry picked from commit 9699397858c6d52d027e79e91041a9dac7280bba)
- Add a filament picker dialog for official color selection
- Enable displaying multiple filament colors in the picker dialog and preview sidebar
- Introduce two new config options:
- `filament_multi_colors`
- `filament_color_types`
to both the application config and the 3MF config
jira: STUDIO-12346
Change-Id: I66f8c1ec9147df4f5948c8a329c1737551280e63
(cherry picked from commit 522dc0bbca49033a1ba9725ca7f6c3ea729691a6)
