None of these came from the review; they were found auditing the branch for the
same class of leak review comment 6 identified.
physical_extruder_map was normalised through effective_physical_extruder_map on
every Print::apply(), so any printer with more than one nozzle and no authored map
got the identity [0,1,...,n-1] where the single-element {0} default belongs. The
key carries two readings: the IMEX paths index it by logical extruder and need one
entry per extruder, while the inherited BBL paths read it through the clamping
get_at(), for which {0} means "everything is physical 0". Deriving unconditionally
imposed the IMEX reading on profiles that mean the other one, changing the config
block line and the {first_tools} / {first_filaments} / {curr_physical_extruder_id}
placeholders for multi-nozzle non-IMEX printers. Gated on is_imex; every consumer
needing the per-extruder form is already IMEX-gated, and profiles with an authored
map of the right length are unaffected either way.
That gating unmasked a latent out-of-bounds read: WipeTower's M104/M109 emitters
index m_physical_extruder_map by tool with no bounds check, which reads past the
end of the single-element default on a multi-nozzle machine. Upstream's bug, from
the BambuStudio wipe tower sync, previously hidden because the map was being
widened for everyone. Now bounds-checked, falling back to the tool's own index --
the form GCodeProcessor already uses for the same map.
Preset::save() and get_preset_differed_for_save() carried a branch storing the
full vector whenever a child and its parent had different lengths. It was written
against a set_with_nil that threw on mismatched sizes; upstream #13035 replaced
that with a tolerant version that keeps the child vector verbatim and nil-marks
only the overlapping range, and that fix was already in the tree when this branch
was rebased. Left in, it defeated the delta encoding for every user printer preset
whose extruder count differs from its parent's: a 7-extruder profile inheriting a
single-extruder base wrote out all of its per-variant retraction keys as literals,
including ones identical to the parent, pinning them against future vendor updates
while the UI still reported the preset as inheriting. Removed; the two save loops
are now identical to upstream. Note this only affects new saves -- presets already
written keep their frozen values until re-saved.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Validate mixed-filament definitions during the published material pass: definitions whose components reference slots that do not exist or hold other mixed filaments, or that carry fewer than two components, are reported through the shared skipped_keys channel instead of shipping a mix the GUI integrity check would only flag later.
Fix the slot-limit exhaustion report being silently dropped: it wrote to published_config->skipped_keys, which the pass's final move-assignment from the local vector clobbers. All rejections now go through the local.
Remove the unreachable persist branch from add_detached_preset: no caller passes save_to_project=false, so the parameter is gone and the copy is always project-embedded.
Tests: cover the exhaustion path, the new definition validation, the identity-tier matching matrix (including substitute reporting), the structural-key denylist, whole-vector size-mismatch skips, relocation payload degradation, the "(Published 2)" uniquify chain, mixed blend colours staying out of shared preset configs, and duplicate-slot last-wins. Also fix the legacy-3mf scenario passing vacuously behind an if-guarded assertion. All existing published/3mf tests pass unchanged.
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
# Description
This PR ports the color mixing feature from BambuStudio.
The port is based on the previous work by @ianalexis in #15231.
This PR completes the port and fixes various bugs.
Several improvements were also made during the porting process.
WIP
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Upstream replaced MainFrame's fixed-index TabPosition enum with string-based
page ids ("feat: refactor notebook/tabs to be string based instead of fixed
index based"). The IMEX toolhead-visibility menu item was the only consumer of
that enum left on this branch, so its enable check now compares
m_tabpanel->GetSelectedPageName() against TAB_ID_PREVIEW -- the same form the
neighbouring upstream menu items use.
That mismatch is what broke CI: the branch built on its own, but the merge
commit CI builds no longer had TabPosition declared. No other conflicts.
666/666 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add caching system for presets
* Removing user\bundle serialization and keeping it only for system presets
* Integrate caching into WebGuideDialog which speeds up time of SetupWizzard and PrinterSelection dialog
* Add CI\CD step to prepare cache file in ahead of time so user does not need to wait
* Add partial cache generation when only one of the vendros is changed to speed up recalculation time
* Handle corrupted files
* Add cache to GuideDialog as previos version didn't work as expected
* Add inspecting tool and fix CI cache generation
* Generate cache per vendor
* Simplify code by mergin it in PresetBundle
* Simplify code a bit more
* Add cereal serialize() to VendorProfile, PrinterModel, Preset, and Semver
* Remove CachedPrinterModel/VendorProfile/Preset mirror structs from VendorCache
* Fix use-after-free in CallAfter lambda; replace raw thread pointer with unique_ptr
* Use get_vendor_cache_key() to match cache keys written by the app
* Remove BOM added by VSC
* Skip invalid vendors
* Remove leftover cache file
* Fix build for windows arm64
* Revert json cache back
* Update check for stale cache
* Serealize all value fields for Preset class to minimize regression later
* Minimize field duplication by moving Cache thing into PresetBundle
* Add tests for Cache system
* Add a bit more tests
* Merge branch 'main' into feature/cache_profiles_and_optimize_loading_speed
* Rvert from per-verndor to single cache file
Replace N per-vendor .cache files with a single system_presets.cache
that holds all vendors and presets in one serialized blob.
Cache load is now all-or-nothing: on hit all vendors are applied from
the bundle (sub-second); on miss all vendors are parsed from JSON and
a fresh bundle is written to the user cache dir.
Invalidation is driven by bundle_key - a sorted concatenation of all
vendor JSON version strings. Any vendor update invalidates the whole
cache and triggers re-parse on next launch.
Guide wizard (WebGuideDialog) loads the bundled cache into a plain
PresetBundle instead of a separate VendorGuideData struct, removing
the duplicate data model.
generate_system_cache simplified from a per-vendor loop to a single
save_system_presets_cache() call producing one output file.
* Transfer all Preset fields from cache via move assignmet
apply_vendor_preset_group was copying fields manually and missed
bundle_id, user_id, base_id, sync_info, updated_time, key_values,
ini_str. Replace field-by-field copy with move assignment of the
fully-deserialized Preset, then restore the vendor pointer which
is excluded from serialization.
* Ignore cache for future
* Remove not used files
* Ship one preset cache per vendor in place of the profile JSONs
Each vendor's system presets serialize into a single <vendor>.opc built at
package time, and a shipped build carries that file alone — the profile JSON
and its sub-file tree are pruned. The vendor loader, the setup wizard's profile
list and the resource installer all read a vendor through its cache, falling
back to parsing whenever one is absent, stale or unreadable, so the cache stays
an optimization and never a source of truth. Caches hold presets in source form
and resolve inheritance at load, through the same code the JSON path uses.
* Make the preset cache self-describing and load each vendor from the system folder alone
The cached DynamicPrintConfig is keyed by name, through a per-file dictionary of the
distinct opt_keys, the type each was written as, and the distinct enum value names,
instead of by serialization_key_ordinal — a position assigned by declaration order at
static init, where inserting one option shifts every later ordinal and the lookup then
succeeds on the wrong option. Because a name-keyed payload drops the options this build
cannot place rather than being rejected wholesale, the schema fingerprint goes, and with
it the two fallbacks that existed only because an installed cache died on every app
upgrade: the second lookup tier into resources/profiles and the parse fallback to the
same place. A vendor is loaded from <data_dir>/system/ and nowhere else, as on main —
which is what makes the app write its .opc files there again.
* Simplify the preset cache internals after review
* Use the shared temp-dir helper in the preset bundle loading test
* Bound stamp string reads in the preset cache
* Speed up the setup wizard with a profile-data cache
The wizard's per-vendor fast path threw on vendors present only in
resources, falling back to a ~29 s raw JSON scan on every open. Each
vendor now loads from the directory it was found in, and the derived
model/machine/filament/process catalog is cached whole in
<data_dir>/cache/wizard_profile_data.json, stamped by each vendor's
name and version - a fresh cache makes an open one file read, with no
bundle built and no presets installed (~0.2 s vs ~2 s).
* Remove debug SVG dump from a geometry test
* Move the per-vendor cache file format into PresetCacheFormat
* Move the vendor install helpers from PresetBundle into Utils
* rename
* fix flatpak
* change cache version to 1
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
A belt printer slices in a rotated frame, so the belt surface is a tilted
plane rather than the Z=0 bed plane. Each slicing layer touches the belt
only along a narrow strip at its leading edge - about 0.2mm at 45 degrees -
so a part's first layer is really a first line, with almost no contact patch
to hold it down while the belt drags it forward. Brim was hard-disabled on
belt printers, leaving no remedy at all.
Generate the brim on the belt plane instead. The object's belt footprint is
the union over layers of each slice clipped to that layer's contact band; the
brim is offset from it in a "flattened" frame where the shear axis is
stretched by 1/cos(tilt), so ordinary Clipper offsets measure true on-belt
distance. It is emitted as cross-belt lines, one per layer band, anchored to
a fixed fraction of the band so every line shares a nozzle-to-belt clearance
and therefore comes out the same width; flow is matched to the resulting band
pitch, keeping the sheet uniform and gap-free.
Three new controls, all belt-only:
* Leading brim length - extends the brim ahead of the part along the belt,
on every downhill-facing edge of its contact area. This apron necessarily
prints BELOW the object's first layer, since layer 0 is the part's leading
contact, so it needs brim-only bands of its own.
* Extra brim width - widens the brim sideways across the belt only.
* Brim type "Leading edge only" - brim at the part's first belt contact and
nothing after it. Appended last in BrimType so no existing value shifts;
degrades to an outer brim off belt printers, with a warning.
The apron bands are lightweight records rather than a Layer subclass, so no
fabricated Layer::id() can leak into initial-layer temperature selection, the
spiral vase probe, cooling or gradual interpolation. They are generated in
posSupportMaterial because their print_z values must exist before ToolOrdering
is built at psWipeTower, and they are emitted from a short dedicated branch in
process_layer that runs before any layer pointer is dereferenced.
The footprint is closed before offsetting outwards: a belt contact patch is
often a broken-up strip, and the merged offset rings of two islands closer
than 2 x brim_width would otherwise fill the space between them - space that
lies under the part.
Also fixes a pre-existing bug where PrintObject::get_first_layer_bbox()
overwrote a valid bbox with an unassigned one on any belt printer with a brim
configured, because has_brim() was true while make_brim() returned early.
Belt brim is refused alongside the prime tower and spiral vase, and requires
one instance per PrintObject - translating an instance along the belt axis
changes its physical belt-floor Z. Untilted belt printers are unchanged: they
still get no brim, since the plate brim is emitted out of skirt_brim_groups(),
which _make_skirt() never builds for a belt printer.
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
Brings the belt-printer work up to date with 591 upstream commits.
Conflict resolutions (12 files, 42 hunks):
- GCode.cpp: adopted upstream's per-filament/per-nozzle config refactor
(get_filament_config_index, NOZZLE_CONFIG), the extracted
generate_timelapse_gcode + farthest-point timelapse, and the
ConfigOptionFloatsNullable calibration options. Re-applied the belt
hooks on top: init_belt_writer / axis remap / FirstLayerPlane setup,
on_set_origin, the belt-corrected calib_z for the volumetric speed
tower, and path_on_first_layer (belt's per-path first-layer test) in
place of upstream's layer-index on_first_layer() in the acceleration,
jerk and overhang-detection paths. Swept upstream's new m_writer.
uses to m_writer-> since belt holds the writer by unique_ptr.
- interpolate_value_across_layers: kept upstream's banded stepping and
belt's object-Z-span ratio; dropped upstream's duplicate ratio decl.
- Plater.cpp: took upstream's guarded add_model(...) early-returns and
the VFA vfa_layer_height plumbing; kept the belt temp-tower path,
_calib_apply_belt_mode and belt_calib_flip_ringing_tower. Dropped the
VFA "cut upper" block, superseded upstream by model scaling.
- Brim.cpp: upstream's ObjectInstanceID-keyed brimAreaMap, keeping the
belt early-return.
- 3DScene.cpp: kept both the belt build-plate tilt up_direction and
upstream's per-extruder printable-height shading.
- GCodeViewer.cpp: kept upstream's dim-previous-layers setup and belt's
exemption from the same-result early return.
- TreeSupport.cpp: upstream's >= 0 roof-layer fix inside belt's
belt-floor branch.
- calib.cpp / GCode.hpp / GCodeWriter.{cpp,hpp} / Print.hpp: upstream's
additions adapted to belt's pointer-held writer and helpers.
- Custom.json: kept profile version 02.04.00.03 (belt) over upstream's
02.04.00.01; both bumped from 02.04.00.00.
Building this tree needs the wxInspector dependency, which upstream
added in the interim (python3 and wxWidgets 3.3.2 were already present
in the shared deps prefix).
# Description
Changing a slicing plugin's configuration had no effect on the sliced
result until you forced a re-slice some other way; it now applies
immediately. Print, printer and filament presets also keep their plugin
configuration separately, so configuring a plugin on one no longer wipes
out what you set on another.
A plugin's custom configuration page gets the same round of improvements
in both the Plugins dialog and the per-preset dialog: it follows the
app's light/dark theme, keeps its state while you edit instead of
resetting under the cursor, and can tell whether it is being edited
globally or for a preset, so "Restore defaults" can be labeled for what
it will actually do. The two bundled examples show this off — Twistify
now ships a custom configuration UI, and Inspector is themed, groups
# Screenshots/Recordings/Graphs
https://github.com/user-attachments/assets/02ca062a-5143-49a3-abe0-a2a040b3a928
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
## Problem
On H2C (carousel) printers, the wipe tower purge volume calculation in
`_make_wipe_tower()` tracks filament state **per-extruder** (2 slots).
Since H2C has up to 7 carousel nozzle slots on a single extruder, all
filaments sharing that extruder are collapsed into one tracking slot.
This causes:
Test:
[5cubes.3mf.zip](https://github.com/user-attachments/files/30092551/5cubes.3mf.zip)
- **Massive redundant AMS flushing** every filament change on the
carousel triggers a full purge against the "previous" filament, even
when the target nozzle slot already has the correct filament loaded
- **60.9g total weight** instead of ~17g (**3.5× material waste**)
- **3h09m print time** instead of ~1h57m (**60% longer**)
## Root Cause
The code uses `nozzle_cur_filament_ids[extruder_id]` (a 2-element array)
to track which filament was last used for each extruder. BambuStudio
uses `NozzleStatusRecorder`, which tracks per `group_id` (physical
carousel slot 0..6).
## Changes
| File | Change |
|---|---|
| `Print.cpp` | Replace `nozzle_cur_filament_ids` with
`NozzleStatusRecorder`. Use `get_nozzle_for_filament()` to resolve the
physical carousel slot per layer. Select `filament_prime_volume_nc` for
nozzle changes, `filament_prime_volume` for filament changes. |
| `PrintConfig.hpp` | Add `ConfigOptionFloats filament_prime_volume`
(per-filament EC prime volume, missing from upstream but present in BBS
and H2C profiles) |
| `PrintConfig.cpp` | Register `filament_prime_volume` with default
45mm³ (matching BBS) |
| `Preset.cpp` | Add `filament_prime_volume` to preset keys |
Also includes `tests/compare_analyzer/` - two standalone Python tools
for G-code slice comparison and temperature timeline analysis (stdlib
only, no dependencies).
## Test Results (5-color H2C Hybrid print, same 3mf project)
| Metric | Upstream (broken) | **Fixed** | BBS (reference) |
|---|---|---|---|
| **Total weight** | 60.90g | **16.20g** ✅ | 17.47g |
| **Print time** | 3h09m | **1h57m** ✅ | 1h51m |
| **Filament changes** | 105 | 105 | 140 |
| **Tool changes** | 35 | 35 | 35 |
| **Critical discrepancies vs BBS** | ⚠️ YES | ✅ None | — |
## Analysis Tools (`tests/compare_analyzer/`)
Two standalone Python tools (stdlib only, no dependencies) for deep
G-code comparison:
- **`compare_slices.py`** - comprehensive .3mf slice comparison:
filament usage, nozzle mapping, tool change sequences, prime tower
analysis, temperature timeline, retract parameters, and automatic
critical discrepancy detection (weight/time anomalies)
- **`show_temp_plot.py`** - interactive HTML temperature timeline
plotter for visualising heater profiles during multi-nozzle prints
(supports single-file and side-by-side comparison)
Usage:
```bash
python3 tests/compare_analyzer/compare_slices.py file1.3mf file2.3mf --labels "Upstream" "Fixed"
python3 tests/compare_analyzer/show_temp_plot.py file1.3mf file2.3mf
```
## Screenshots
### OrcaSlicer Upstream (unfixed) - 60.90g, 3h09m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 22 58"
src="https://github.com/user-attachments/assets/3efb2bff-ff1e-43db-9669-feafa5921b51"
/>
### OrcaSlicer Fixed - 16.20g, 1h57m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 23 08"
src="https://github.com/user-attachments/assets/c1d36dc5-9b01-4691-80ef-7364540e1f4e"
/>
### BambuStudio Reference - 17.47g, 1h51m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 24 52"
src="https://github.com/user-attachments/assets/5c0b11e2-64f4-40e9-8c7c-3f42519786c3"
/>
### Temperature Timeline: Upstream vs Fixed
<img width="1511" height="829" alt="Screenshot 2026-07-16 at 15 23 35"
src="https://github.com/user-attachments/assets/926c2cb5-dfd4-4ce0-bb40-82e6165eb134"
/>
### Temperature Timeline: Fixed vs BBS
<img width="1512" height="825" alt="Screenshot 2026-07-16 at 15 23 51"
src="https://github.com/user-attachments/assets/85c72dda-e779-4aa6-8118-fb17e5f8482d"
/>
## Compatibility
Safe for non-carousel printers: when each extruder has a single nozzle,
`group_id == extruder_id`, so `NozzleStatusRecorder` behaves identically
to the original per-extruder tracking. The `filament_prime_volume`
default (45mm³) matches the existing global `prime_volume` default.
## Reference
BambuStudio `Print.cpp` `_make_wipe_tower()` L3341-3392 -
`NozzleStatusRecorder` pattern.
Resolved 4 conflicts:
- PrintConfig.hpp / Preset.cpp: upstream restored calib_flowrate_topinfill_special_order
(removed in the prior merge, now re-added and re-registered); kept it alongside our
IMEX options (imex_parallel_mode, imex_head_filament_map).
- Plater.cpp: kept our <sstream> include plus upstream's <optional> and plugin includes.
- tests/fff_print/test_gcodewriter.cpp: both sides appended disjoint scenarios after a
shared base. Reconstructed as upstream's full file (base + its 3 toolchange/H2C
scenarios + the boost/filesystem include its helper needs) followed by our 10
set_pressure_advance / set_temperature scenarios. 22 scenarios total, no duplicates.
The preset option was plugin_preference_overrides while the GUI field type
that renders it was GUIType::plugin_config, for one and the same thing.
Settle on "config": the store, the dialog and the Python hooks all say config
already, so renaming that way touches 4 files instead of the whole plugin
subsystem and the public plugin API.
Keep the _overrides suffix — the option is the preset's override layer over
the base PluginConfig store, a distinction EffectiveCapabilityConfig tracks.
Also wrap the printer tab's group heading in L(); it was the only one of the
three missing it, and was therefore untranslatable.
The upstream _make_wipe_tower() tracked purge volumes per-extruder (2 slots),
which collapsed all H2C carousel filaments into one slot and caused massive
redundant AMS flushing (~40g instead of ~0.4g).
Changes:
- Print.cpp: Replace per-extruder nozzle_cur_filament_ids with BBS
NozzleStatusRecorder that tracks per group_id (carousel slot 0..6).
Use get_nozzle_for_filament() to resolve physical slot per layer.
Select filament_prime_volume_nc for nozzle changes, filament_prime_volume
for filament changes (BBS pattern).
- PrintConfig.hpp/cpp: Register filament_prime_volume (per-filament EC prime
volume, default 45mm³) matching BBS PrintConfig.
- Preset.cpp: Add filament_prime_volume to preset keys list.
Safe for non-carousel printers: group_id == extruder_id when each extruder
has one nozzle, so NozzleStatusRecorder behaves identically to the original
per-extruder tracking.
Reference to BBS: BambuStudio/src/libslic3r/Print.cpp _make_wipe_tower() L3341-3392
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
Resolved conflicts in PrintConfig.hpp and Preset.cpp. Both were adjacent to upstream's
removal of calib_flowrate_topinfill_special_order (superseded by the new
top/bottom_surface_fill_order options); took upstream's removal from the option class
and the print-options list while keeping our new IMEX options (imex_parallel_mode,
imex_head_filament_map) and the IMEX enums (ImexToolLayout, ImexVizTheme) alongside
upstream's new SurfaceFillOrder enum. The option remains in PrintConfig's legacy
ignore-set so old projects still load.
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
