SVNMLR
4dcfd97181
[Multi Material] Fix first layers of prime tower when using "no sparse layers" ( #2764 )
...
* MM - Add check for first layer
* Change: If no sparse layer is on -> Respect the toolchange in the first-layer checkup, to use a brim and slow down printspeed if using a primetower
* Fix comment
2023-11-17 08:01:52 +08:00
SoftFever
9505f93717
fix thumbnails regression
2023-11-17 07:54:59 +08:00
Exerqtor
f61c504696
Fix for QOI thumbnails not working ( #2755 )
...
Fix for QOI not working
Should remidy the issues in https://github.com/SoftFever/OrcaSlicer/issues/2741
2023-11-16 18:13:08 +08:00
SoftFever
bbdd580bb1
fix wipe tower bug: filament end inserted twice
2023-11-16 01:00:59 +08:00
SoftFever
930e1b3bdf
limit max wipe tower speed to 90 mm/s
2023-11-16 00:59:45 +08:00
SoftFever
cf4aceec79
remove filament_max_volumetric_speed cap
2023-11-15 19:03:16 +08:00
Noisyfox
b1a164b67f
Fix scaling of min_width_top_surface when using abs value ( #2725 )
2023-11-14 17:15:29 +08:00
SoftFever
5213fbfa86
Support initial_tool variable for filename format
2023-11-13 22:25:32 +08:00
SoftFever
50f776fe6b
fixed an issue when purge_in_prime_tower is disabled for non bbl printers
2023-11-12 09:52:07 +08:00
SoftFever
15358b211d
Fix a regression issue that retraction is not correct when wipe is off
...
Fix #2697
2023-11-12 09:52:07 +08:00
SoftFever
c860680b21
Fixed a issue that support_bottom_z_distance was not working as expected.
...
Fixed #2667
2023-11-10 19:46:01 +08:00
SoftFever
edb5676dd1
Fixed a bug that filament start gcode was inserted twice when wipe tower is enabled
...
fixed #2673
2023-11-10 18:00:56 +08:00
Ocraftyone and supermerill
120a3576a0
SS port - Change extrusion role gcode ( #2459 )
...
implement custom gcode for when the extrusion role is changed
Co-authored-by: supermerill <merill@free.fr >
2023-11-09 22:30:30 +08:00
Noisyfox and Lukáš Hejl
f16feff2a4
Fixes scars on thing walls when "avoid crossing wall" is turned on ( #2659 )
...
* Travel very close to the inner holes, could cross external perimeter when the avoid crossing perimeters was enabled.
(cherry picked from commit prusa3d/PrusaSlicer@6c51e5148c )
* Modified variable offset in the avoid crossing perimeters to not cause scars on thin objects (#7699 ).
Previously, the minimum contour width was chosen too conservative and, on some thin objects, only allowed minimal (or non) offset. This could result in travels being planned along the outer perimeter.
Now, the minimum contour width is chosen much smaller at the start and tested if the variable offset wasn't failed (the outer contour broke up into more parts, more or fewer holes, etc.).
If any problem is detected, the variable offset is recalculated with a larger minimum contour width.
(cherry picked from commit prusa3d/PrusaSlicer@dc00f0bf98 )
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com >
2023-11-09 22:21:44 +08:00
SoftFever
df0a49a73d
Fix retraction issues
2023-11-09 20:54:33 +08:00
Noisyfox
c0a8f430f8
Add back the option to disable ensure vertical shell thickness and detect narrow internal solid infill ( #2626 )
...
* Add back the option to disable `ensure vertical shell thickness` (#2602 )
* Add back the option to disable `detect narrow internal solid infill` (#2623 )
2023-11-06 23:21:07 +08:00
SoftFever
9f599cd51f
Fixed #2537 : pa pattern issues on delta printers
2023-11-06 23:02:40 +08:00
SoftFever
4eae93080f
Fix vector too long issues
2023-11-06 18:32:19 +08:00
Noisyfox
528fb630bc
Organic: Fix support blocker ( #2595 )
...
Expand blockers a little bit to compensate the error in facet projection
2023-11-04 02:42:30 +08:00
Rob Trame
f1345d276b
Fix typos and style inconsistencies related to configuration ( #2580 )
...
* Fix 'min' accidentally defined as 'max'
* Remove duplicate retract_lift_above/below definitions
* Add correct unit for jerk
* Make speed tooltip consistent with others
* Remove accidental 's' in Qidi XPlus config
* Remove trailing comma in RatRig config
* Add 'type' field to KP3S PRO configs
* Revert "Make speed tooltip consistent with others"
This reverts commit 16c057518154ca51f3de
2023-11-04 02:41:13 +08:00
SoftFever
8fcaef53f7
skip only one wall top checking for bridges
2023-11-03 18:35:46 +08:00
SoftFever
4fe80bcbc5
remove staff_pick_switch
2023-11-03 18:35:46 +08:00
Ocraftyone
d574816aef
Add default page selection ( #2569 )
...
Add option to change default page
2023-11-02 18:28:13 +08:00
SoftFever
61e05f9bd1
Fixed #2562 : disable extra perimeters over overhangs for spiral vase
2023-11-01 23:12:22 +08:00
Ocraftyone
06f966e43a
Add splash screen toggle ( #2568 )
...
Add preferences option to toggle splash screen
2023-11-01 16:47:14 +08:00
SoftFever
ac67387c7d
Fixed #2527 : missing THUMBNAIL_BLOCK_START
2023-10-30 23:00:43 +08:00
SoftFever
7e91d68493
add overall_chamber_temperature variable
2023-10-30 19:53:22 +08:00
SoftFever
3fca10d7f8
Fixed #2245 : change min value of *_speed parameters from 0 to 1
2023-10-30 19:49:30 +08:00
SoftFever
6fe5abc8cc
Fix Process_T
2023-10-30 00:09:01 +08:00
SoftFever
338f4609f3
skip relative e distance check for BBL
2023-10-29 17:54:35 +08:00
SoftFever
7ff4005c22
Fix errors when slicing A1 mini
2023-10-29 12:16:16 +08:00
SoftFever
db97f91abc
Enable cancel object for multi color printing(BBL)
2023-10-28 22:50:37 +08:00
Ioannis Giannakas
cee0cbe49a
Updated tool tip and removed min print speed disabling when slowdown for layer cooling is de-selected ( #2524 )
...
* Updated tool tip and removed min print speed disabling when slowdown for layer cooling is de-selected
* Updated tool tip to make it explicit when this setting is used.
2023-10-28 21:55:48 +08:00
mariuske
7a71db1df0
Fixed minor typo ( #2519 )
2023-10-27 21:31:38 +08:00
Microdog
d6c9463a31
fix: fix cooling overhang threshold ( #2508 )
2023-10-27 21:30:23 +08:00
SoftFever
eed0c28bd8
fix some small issues of machine_max_acceleration_travel
2023-10-27 21:09:31 +08:00
SoftFever
9e93b51777
timelapse gcode
2023-10-26 13:16:54 +08:00
enricoturri1966
f1c884acf8
Tech ENABLE_Z_OFFSET_CORRECTION - Correction of toolpaths zs when z offset is set
...
(cherry picked from commit 537ae6bec3bb5347665e294d02cba4a889221445)
2023-10-24 18:50:04 +08:00
SoftFever
6023f79be3
add z offset option
2023-10-24 18:49:53 +08:00
SoftFever
7a2229cae9
Optimize g-code generation for Klipper: combine accel and jerk command
2023-10-24 00:11:33 +08:00
SoftFever
d6146ecc84
Add accel and jerk to object config
2023-10-24 00:05:50 +08:00
SoftFever
da47d0f79e
Fix some issues that some option changes won't tirgger slice status
2023-10-22 20:54:48 +08:00
Noisyfox
e641903b16
Fix crash when referencing an invalid variable name ( #2486 )
...
Fix crash when referencing an invalid variable name using the old placeholder parser syntax
2023-10-22 19:35:53 +08:00
f84e94faf7
Add "Manual filament change" option and logic ( #2379 )
...
* Add "Manual filament change" option and logic
* make suggested changes
* make suggested changes
* change tag from "CHANGE_TOOL" to "MANUAL_TOOL_CHANGE"
* some tweaks
* More fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com >
2023-10-22 19:31:09 +08:00
SoftFever
90601c098a
Feat: chamber temp control and chamber fan ( #2483 )
...
* init
* tweak
2023-10-22 16:38:20 +08:00
SoftFever
809e6d1cc7
Check latest releases only
2023-10-21 19:43:07 +08:00
SoftFever
a7729ca83f
Merge BS 1.7.7.89
...
# Conflicts:
# bbl/i18n/ko/BambuStudio_ko.po
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/ko/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
# src/OrcaSlicer.cpp
# src/libnest2d/include/libnest2d/selections/firstfit.hpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintConfig.cpp
# src/slic3r/GUI/CalibrationWizardPresetPage.cpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/Tab.cpp
# version.inc
2023-10-21 19:41:49 +08:00
SoftFever
156c35e1da
handle more legacy configs
2023-10-21 18:18:52 +08:00
951252c597
Change direction for perimeter extrusion at odd layers. ( #2413 )
...
* Change direction for perimeter extrusion at odd layers.
Initial test code based on supermerill/SuperSlicer@87245ae3c1
* Perimeters for both contours and holes can have alternating direction, to support overhangs on both side.
Also fixes wipe on loop.
* Only reverse order if the loops have steep overhang
* Support a special case that treat every layer as steep overhang
* Add options
* Disable overhang reverse if vase mode is enabled
* Allow extrusion reversal and skip overhang detection if fuzzy skin
---------
Co-authored-by: supermerill <merill@free.fr >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2023-10-21 17:23:05 +08:00
Noisyfox
56fdbf5310
Fix layer path order when multi-layer elephant compensation is used ( #2443 )
2023-10-19 19:57:53 +08:00
SVNMLR