The sidebar Mixed Filament list, the extruder icons, the color painting
gizmo and the canvas filament bar now show the same bottom-to-top fade the
Edit Mixed Filament preview shows, custom gradient curves included, instead
of a horizontal fade between the two component colours. Ordinary and vendor
multi-colour filaments are drawn exactly as before.
_update_select_plate_toolbar_stats_item(true) runs from
on_action_slice_all before the select-plate toolbar has necessarily been
initialized. m_all_plates_stats_item is only assigned in
_init_select_plate_toolbar, so slicing a multi-plate project shortly
after startup (before the Preview tab has rendered) leaves the pointer
null while show_stats_item is true, and the branch dereferences it,
crashing with SIGSEGV.
Every other dereference of this pointer already null-checks it. Add the
same check here so the all-plates stats item is left unselected until the
toolbar is initialized instead of crashing.
Fixes#15116
Prime towers reserved depth from the prime volume alone, ignoring the flush
matrix: rib-wall towers in both the engine and the preview, and rectangle and
cone towers in the preview, which never carried the flush-aware estimate the
engine already used. The preview also read the print preset, which does not
carry the printer- and filament-scope keys the estimate needs and so silently
fell back to defaults. On multi-nozzle printers the flush matrix, which holds
one block per nozzle, was additionally read as a single block. The tower could
come out too small for the purge it has to hold.
The flush-based estimate also skipped the height-based minimum depth that the
prime-volume one applies, so low-flush prints could estimate a tower shallower
than the one that actually gets built.
The placement clamps and the tower-approach router both stood in the bed's
bounding box for the bed itself, so on a delta or hexagonal bed the prime tower
could be parked in a corner that does not exist and the nozzle could be routed
across it. Both now test the real printable outline, slicing reports a tower
that does not fit instead of printing it off the bed, and a tower parked near an
edge is routed along the clamped side rather than falling back to a straight
line across the tower.
Also fixes the placement validation rotating the tower hull by degrees read as
radians about the plate origin, and never rotating the generated tower footprint
at all.
* Fix gizmo being closed after releasing mouse outside the gizmo floating window
The left up event of a drag started on the gizmo floating window (e.g.
selecting text in an input field) and released over the bed was treated
as a click on the plate, which deselected the objects and closed the
active gizmo. Add the ignore_left_up guard to the plate select branch,
matching the deselect branch above.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix Emboss gizmo being closed after releasing mouse outside its floating window
The Emboss gizmo has its own close-on-click-away handler
(on_mouse_change_selection) that was not protected against left up events
originating from ImGui windows, so the gizmo was still closed when a drag
started on its floating window (e.g. selecting text in the input field)
ended over the 3D scene. Expose the canvas's ignore_left_up state to
gizmos and skip the close check for such releases.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Call proper EXT variant of the function if framebuffer type is EXT
* Update glad with `GL_EXT_framebuffer_blit` and `GL_EXT_framebuffer_multisample` extensions support
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
Plater's pImpl (unique_ptr<priv> p) is destroyed before the wxWindow base
destructor runs DestroyChildren(), so child GLCanvas3D windows are torn down
after p is gone. GLCanvas3D::~GLCanvas3D() -> reset_volumes() then dereferences
the freed p through two paths:
- Selection::clear() -> plater()->canvas3D() -> p->get_current_canvas3D()
- _set_warning_notification() -> plater()->get_notification_manager()
Guard both with the existing wxGetApp().is_closing() flag; both are UI-only
side effects that are no-ops during shutdown, so normal-use behavior is
unchanged.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
* Degrees symbol don't need localization
* The Z when referring to the axis should be uppercase
* Fix the spelling of "GitHub" to camelcase
* Unify the casing of mouse button shortcuts
* Always use G-code with an hyphen
* Fix the spelling of "restricted"
* More grammar fixes
* add missing modifications
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* unify footer
adds "Done" Buttons,
standardize "Reset" Buttons,
adds disabled logic to "Reset" Buttons
* adds ImGuiWrapper::COL_WARNING = ColorRGB:Warning,
replaces ColorRGB::Warning
* consistently display warnings,
moves assermbly warning after footer,
make cut warnings warning color
* adds separator above cut warnings
* adds tooltip entry in move, rotate & scale for auto-drop
* use wrapper tooltip in wrapper->button for consistent text color
* restructures brim ears button,
renames "Reset" button in painting tools to "Erase All",
small styling fixes
* small adjustments,
moves "Edge detection" checkbox in painting tool underneath,
moves "Section View" in Brim ears tool after buttons,
moves warnings in Assemble tool under footer
* small brim ear tool structure changes,
adds separator between "Head Diameter" and "Max angle",
adds tooltip to "Auto-generate" button,
rewords shortcut descriptions to match other tools
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
* Add logic to handle the left, middle and right buttons being assigned to do nothing, pan or rotate
* Add entries for setting the drag actions to preferences
* Allow the label text in preferences to wrap
* Show mouse mappings in Help -> Keyboard Shortcuts
* Re-add preferences in updated layout
* Add camera mouse options under camera
* Change mouse action strings to use L() for localization
* Display "None" when it is selected instead of blank in keyboard shortcuts
---------
Co-authored-by: Rob O <robertolabode@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Expose Antialiasing velues
Expose Antialiasing multipliers.
Default to 4 as current implementation but enables the user to disable it to improve performante or increase sampling to improve quality.
* FXAA
* Improve descriptions
* Require restart when MSAA setting changes
Detect changes to the OpenGL MSAA (multisample anti-aliasing) preference when opening Preferences and prompt the user to restart the application to apply the change. Adds a constant key for the MSAA setting, stores the previous value, checks for changes (similar to the existing FXAA handling), and shows a warning dialog explaining the restart will close the current project without saving. If the user accepts, recreate_GUI is invoked to apply the MSAA change immediately.
* Revert "Require restart when MSAA setting changes"
This reverts commit dde134d346c3849598c91d025d2faed1b51c8a22.
* Menu and FPS options
* Fix FPS limiter and remove VSYNC
* Grouped FPS settings and mode up rigth fps counter
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* bbl device selector search box
* align file and more menus with its button
* fix multiline inputbox border color on windows
* fix multiline inputbox border color on windows
* preferences: use content width on combobox dropdowns
* about: match version text size on macOS
* msg dialog improvements
* fix canvas menu overlapping with sliced plates toolbar
* bbl bind dialog button placement
* bbl color picker
* Update StepMeshDialog.cpp
* drop file dialog
* drop dialog revert fonts
* revert windows multiline border
* Update StepMeshDialog.cpp
* update
* Flushing Volumes: match style of combobox
* fix hyperlink color on canvas notifications
* fix possible issues with shared profiles notification
SoftFever