* Add Missing Includes Across src/libslic3r
Every libslic3r source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, with libslic3r headers spelled libslic3r/... so they resolve outside the library's private include paths. MultiMaterialSegmentation.hpp, Support/SupportParameters.hpp and Format/STEP.hpp are made self-contained by hand.
* Make the libslic3r Headers Compile on Their Own
Each now includes, or forward-declares, what it uses instead of relying on what its includers happened to include first. Left out: I18N.hpp, which errors on purpose when included from GUI code, and VoxelizeCSGMesh.hpp and SLA/bicubic.h, which nothing includes and which no longer compile at all.
* Add the Includes Missing From the Hand-Fixed libslic3r Headers
clang-tidy would not edit these headers while they failed to compile on their own, so the first pass skipped them. With the headers now self-contained, a second pass adds the rest.
* Keep Windows Setup Ahead of the Added libslic3r Includes
Print.cpp and Thread.cpp open with a _WIN32 block that has to come first; without the precompiled header, Print.cpp otherwise reaches windows.h through OCCT with NONLS defined and boost/regex fails. OpenVDBUtils.cpp and SLA/SupportTreeBuilder.cpp had includes inside #ifndef NOMINMAX, which libslic3r defines on Windows, so those were skipped there. .clang-tidy also ignores the MSVC STL and UCRT internals, Boost.Multiprecision's fwd.hpp and CPython's Windows include directory.
* Re-Add libslic3r Includes After the Clipper2 2.0.1 Migration
Rebasing onto main took main's version of the files the Clipper2 migration rewrote, so their added includes are restored here, along with includes for main's new code. Clipper2's individual headers are now ignored by clang-tidy: they only build the Z variant through clipper2_z.hpp, which defines USINGZ first, so including clipper.core.h and the like directly broke ClipperZUtils.cpp.
* Lock Config and Preset Files Across Instances and Write Them Atomically
Every running instance shares one OrcaSlicer.conf and one user preset
tree, and nothing kept their writers apart. Two instances saving at the
same moment, or the cloud preset sync thread writing while the GUI thread
saved, could interleave, and a reader in another instance could open a
preset JSON or .info file between truncate and close and get a partial
file, dropping that preset for the session with a parse error.
Add InstanceLock, a scoped guard that serialises the threads of one
process through a recursive mutex and other processes through an advisory
OS file lock: flock on POSIX, held on the guard's own descriptor so no
other close in the process can drop it, and LockFileEx on Windows. The
outermost guard opens the lock file and closes it on release, so nothing
stays open between saves and a data dir can be removed once nothing is
saving into it; the file itself is kept, since deleting it would let a
third instance lock a fresh file while the second still holds the old
one. It is best effort: when the lock file cannot be opened or locked, or
another instance still holds it after a second, the guard logs once and
lets the write proceed, then leaves the file alone for ten seconds, so a
hung instance never blocks every other one and a holder stuck in a
debugger does not cost a stall per save. The guard sits at the leaf
readers and writers: set_sync_info_and_save() calls save_info() under the
preset collection mutex, so a batch lock around save_user_presets() would
invert the order against the sync thread. The user preset scan reads its
files on worker threads without the guard, since the mutex would
serialise them, and takes it per file in the serial commit step, so a
save never waits for the whole scan. Each read keeps the bytes of the
preset and its .info as they were before parsing; commit compares them
with the disk under the guard and reads a file that changed again, so it
never deletes or writes back over another instance's newer save, nor
installs a .json and .info from two different saves; a preset another
instance removed in the meantime is not installed. Without the guard, in
a cool-down, the scan still loads the presets but leaves their files
alone: an unreadable file stays for the next scan, and a derived
compatible printer is not written back. Read-only scans, which is what
the CLI does, take no lock and create no lock file.
AppConfig holds OrcaSlicer.conf.lock in load() and save(); load is
included because the Windows path restores from the .bak copy. Every
user preset writer and reader holds user.lock: Preset::save(), which
writes no .info when the preset itself could not be written, since an
.info without its preset reads as a cloud deletion request, save_info(),
reload() and remove_files(), each preset the scan commits, the
bundle metadata reads and write, the .info removal after a cloud-confirmed
delete, the orphaned-.info scan on the sync thread, the bundle folder
removal on unsubscribe and the physical printer writers and delete
paths. A bundle import extracts under cache/ into a folder per process
and per import, where no scan reads.
Preset JSON, .info, bundle metadata, physical printer and config files,
and the caches and state files that already used a temporary by hand,
now go through write_file_atomically(), which writes <file>.<pid>.<n>.tmp
beside the target and renames it over, so a reader that never waits sees
a complete old or new file. A symlink is followed; a target that is not
a regular file is written in place; and when no temporary can be created
beside an existing target, or the rename itself is refused, by a Windows
reader holding the file open or a mount that cannot replace in one step,
the helper writes in place as before, since losing the save is worse
than a torn read. On POSIX the rename replaces the
target atomically where the old code removed it first and left a window
with no file at all; only a mount that refuses a one-step replace gets
the old remove-then-rename. A crash between temporary and rename leaves
the temporary behind, which no scan reads. Preset::save() returns
whether it wrote the preset, so the scan counts a compatible printer it
could not write back as an error. A failed config write keeps
the config dirty, and the idle handler waits ten seconds before retrying
while an explicit save always tries.
* Run the Cross-Process Lock Test on Every Platform
The test that checks the guard yields to a lock held elsewhere forked a
child to hold it, so it was left out on Windows. The OS lock belongs to
the handle on Windows and to the open file description elsewhere, so a
second handle in the same process is refused like another instance
would be. The test now holds the lock that way and runs everywhere.
Tommaso asked the question that names the real defect: if the sketch was open, why was
the same sketch shaded closed and offered for extrude? Because the two halves used
different tolerances. region_loops shades a region closed at 1e-3 mm; connected_loop
chained at 1e-3; the kernel welded at 1e-4 and OCCT matched vertices at 1e-7. The
2.28e-5 mm gap in the reported sketch did not cause that disagreement, it only made it
visible — and fixing the gap alone would have left the contradiction in place, ready to
reappear anywhere in (1e-4, 1e-3].
kSketchJoinTol now lives in SketchEngine.hpp and is the only place the number exists.
region_loops, loop_report, connected_loop and entities_to_wires all read it through
sketch_join_tol(). The viewport cannot promise a region the kernel refuses to build.
The welding is optional, because a kernel that silently closes loops should let you say
no: "Auto-close sketch loops" in Preferences, default ON, no restart. OFF means only
exactly coincident endpoints join — and since both halves read the same value, the
viewport simply stops shading the region closed, so an open loop is visible rather than
welded behind your back. No separate UI needed for that; it falls out of sharing one
number.
Details that matter. The kernel defaults to auto-close ON independently of the GUI, so
headless and MCP callers behave like the viewport instead of inheriting an unset
preference. With the tolerance at 0 the comparisons become <=, because OFF must mean
exact, not broken. OCCT never receives a zero vertex tolerance — it is clamped to
Precision::Confusion.
The preference is pushed from EVERY entry that starts a sketch session, not just
begin(): a Constrain session enters through begin_constrain / begin_constrain_entities
and uses region_loops and connected_loop, so a single push site would have left those
sessions running on whatever the previous one set. begin_imported_transform is excluded
deliberately — it works on imported regions, not chained entities.
Tests: a loop with one joint open by 9e-4 mm, given out of traversal order, builds a
closed four-edge wire; with auto-close off the same loop yields no wire; and an exactly
closed loop still builds with auto-close off, proving OFF means exact. Kernel 66104
assertions / 606 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
The tab is now gated on a new enable_cad_feature app-config key, off by
default, exposed in Preferences under General > Features. When off, the
page is never created, so the Design-only camera option is hidden too.
Takes effect on restart, like the other feature toggles.
SLIC3R_CAD=OFF now builds without SolveSpace or OCCT's ModelingAlgorithms
module, leaving the dependency set identical to upstream's, and the Design
tab's mate connector preference no longer appears in builds without the tab.
When the deps prefix and the project disagree about the option, the configure
fails naming the cause, rather than failing at link time or at first launch
on Windows. The Windows packaging step stages exactly the toolkits libslic3r
links.
# Description
Printers discovered/bound under one printer agent (e.g. built-in BBL)
were leaking into another, independent agent's "My Device"/"Other
Device" lists and inheriting its saved access code, since neither the
device list nor bind state was ever scoped by which agent found them.
- Add printer_agent_id to MachineObject/BBLocalMachine, stamped at
discovery/bind time; filter get_my_machine_list(),
get_my_cloud_machine_list(), and update_other_devices() by it.
- clear_other_devices() now drops entries stamped by the outgoing
agent on swap, so the incoming agent's own discovery re-inserts and
re-stamps them fresh instead of leaving them stale-tagged forever.
- Scope access_code by (dev_id, printer_agent_id) on BBLocalMachine
(LAN only since cloud's userMachineList is always refreshed live from
the account API, so it isn't at risk the same way), with a
BBL-only legacy fallback to the old flat access_code/user_access_code
keys so existing bindings keep working.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Tommaso's decision (snaporca-x0kd): face orientation is hardwired perception -- a toddler reads
a face's roll and verse with no instruction -- so the connector is a face by default and the
conventional disc + roll quadrant stays, selectable, for users who expect it.
Preferences > Control > Camera > "Draw mate connectors as a face", default ON, key
design_connector_face_glyph. Read every frame rather than latched, so toggling takes effect on
the next repaint -- a look you cannot A/B without restarting will not get compared. Verified on
the rig: unchecking it switches the viewport to the disc live, no restart.
WHY A RELIEF AND NOT A DRAWING. A flat face in the connector's plane foreshortens by
sin(elevation) and collapses at a grazing view exactly like the quadrant it replaces -- measured,
the quadrant falls 89 -> 20 -> 3 -> 0 lit pixels from 47 degrees to edge-on. The relief does not:
its silhouette carries the information. So the glyph is a small shaded solid, painter-sorted,
lambert-shaded against a light fixed in CAMERA space so orbiting does not swing the shading.
THE MUZZLE, AND THE MISTAKE THAT NEARLY LOST IT. It is the only feature standing along +Z, so it
says which way the connector points and it is all that survives edge-on. Two errors on the way:
1. I built its footprint from height*tan(draft) and got a needle. The real base OVERHANGS the
crest at both ends (0.062 nose, 0.034 tail) and that overhang is what makes it a wedge. Base
now lifted straight off the mesh.
2. Worse, I chased fidelity. Scaled honestly the ridge is 11.3 mm on an 83.3 mm face -- 13.6 %
of the width -- and at 22-48 px that is a scratch. Tommaso looked at it and could not find
the muzzle at all, which is the only test that counts. A glyph is a symbol, not a scale
model, so it now gets two deliberate exaggerations, and COLOUR does most of the work:
muzzle share of lit pixels at 90/16/6 deg -- body tone 14.8/11.3/17.5 %, accent gold
18.3/19.2/23.9 %, accent gold at 1.8x width 23.5/25.2/31.2 %.
The accent is the same gold the disc spends on its roll quadrant, so it stays this tab's "here
is the direction that matters" colour. Polarity is still on the Z arrow's head; nothing collides.
A connector whose ROLL COULD NOT BE DERIVED keeps the disc treatment whatever the preference says.
A face asserts a definite orientation, and asserting one for a roll that was never derived is the
same confident lie that got billboarding rejected.
Geometry is emitted from the part by docs/design/mate-connectors/emit_glyph_table.py, not
hand-drawn, so glyph and printed connector cannot drift: 12-vertex outline, two eyes, chin bar,
cheek dot, and the snout wedge. Crest 29.0 mm / 6.58 mm drop / 13.1 deg against the review's
28.3 / 6.61 / 13.1 on the B-rep.
Also fixes extract_outline.py, which walked w.Edges: OCC returns them in storage order, not ring
order, ignoring per-edge orientation, so the outline was scrambled -- 45 points and perimeter
6.380 where a clean ring gives 31 and 3.335. Every measurement in the design notes was re-run.
The correction reversed one earlier finding: handedness does NOT read on its own (5.4/8.0/9.1 %
different from its mirror, not the 32-35 % the scrambled ring produced), so the cheek dot is
required rather than merely nice.
RIG-VERIFIED on Xvfb :12 against a 60x40x10 box with a face+edge connector: the face renders with
both eyes, ears, chin bar, cheek dot and a gold muzzle standing proud; the Z arrow degenerates to
its ring when viewed down the axis; and the preference switches to the disc live.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reported on #15239: after signing in to Orca Cloud on a fresh install, no sync
prompt appears and File > Sync Presets is greyed out with nothing to explain why.
CAUSE. AppConfig::get_stealth_mode() returns true whenever `firstguide/finish` is
unset, and that flag is written in exactly one place — GuideFrame::SaveProfile(),
i.e. only when the setup wizard is COMPLETED. Closing the wizard is what people do
today to reach the login (the wizard never offers it, which is #15239 itself), so a
new user ends up permanently in a stealth mode they never chose. Every cloud gate
keyed on get_stealth_mode() then switches off silently, including:
* GUI_App::on_user_login_handle(), which returns EARLY on stealth — so the whole
post-login flow is skipped: preset migration, plugin fetch, user-preset load and
show_sync_dialog(). That is the missing sync prompt.
* the Sync Presets item in both the top menu and the File menu, whose enable
lambda was `is_user_login() && !get_stealth_mode()`. That is the greyed item.
The result is indistinguishable from real Stealth mode, and nothing in the UI says
so, because the one place that DOES explain it — the "Quit Stealth Mode" dialog in
handle_web_request() — only covers the homepage login commands.
FIX, two parts.
1. The pre-wizard value is a DEFAULT for "the user has not been asked yet", not a
setting, so it must not survive the user answering. Signing in to a cloud account
is that answer. AppConfig now carries a session-only `m_cloud_logged_in` mirrored
from the network agent (on login, on logout, and at agent start so a restored
session counts), and get_stealth_mode() consults it before falling back to the
pre-wizard default. An explicit Stealth mode setting is untouched and still wins:
a user who turned it on deliberately stays offline whether or not they sign in.
2. Sync Presets no longer greys itself out. Both refusal paths already had a message
to show — "You must be logged in…" and now one for Stealth mode naming the
Preferences toggle — and the enable lambda was making both unreachable. A disabled
item that cannot say why is the reason this took a bug report to find.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fixes: %g directive writing between 1 and 13 bytes into a region of size between 6 and 18 [-Wformat-overflow=]
* fixes: %5s directive writing between 5 and 63 bytes into a region of size 58 [-Wformat-overflow=]
* fixes: catching polymorphic type by value [-Wcatch-value=]
* fixes: [-Wcomment]; removes whitespaces
* increases buffer size from 71B to 90B to avoid potential ovfl.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
* Don't show unsupported presets in drop down list, since it's not useful
* Add option to show unsupported presets
* Explicitly set the default value to `false`
* update filament list without restart on preference change
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Update the stealth mode description to reflect the current code changes in 2.4.
* disable HMS if bambu network plugin is not installed or in stealth mode
* fix build err
* add hide_login_side_panel to control whether to show login panel in home page
* Add logic to handle the left, middle and right buttons being assigned to do nothing, pan or rotate
* Add entries for setting the drag actions to preferences
* Allow the label text in preferences to wrap
* Show mouse mappings in Help -> Keyboard Shortcuts
* Re-add preferences in updated layout
* Add camera mouse options under camera
* Change mouse action strings to use L() for localization
* Display "None" when it is selected instead of blank in keyboard shortcuts
---------
Co-authored-by: Rob O <robertolabode@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Expose Antialiasing velues
Expose Antialiasing multipliers.
Default to 4 as current implementation but enables the user to disable it to improve performante or increase sampling to improve quality.
* FXAA
* Improve descriptions
* Require restart when MSAA setting changes
Detect changes to the OpenGL MSAA (multisample anti-aliasing) preference when opening Preferences and prompt the user to restart the application to apply the change. Adds a constant key for the MSAA setting, stores the previous value, checks for changes (similar to the existing FXAA handling), and shows a warning dialog explaining the restart will close the current project without saving. If the user accepts, recreate_GUI is invoked to apply the MSAA change immediately.
* Revert "Require restart when MSAA setting changes"
This reverts commit dde134d346c3849598c91d025d2faed1b51c8a22.
* Menu and FPS options
* Fix FPS limiter and remove VSYNC
* Grouped FPS settings and mode up rigth fps counter
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
fix: eliminate UI freeze during cloud preset sync on startup
Move synchronous HTTP calls off the main thread in
GUI_App::start_sync_user_preset():
- Call scan_orphaned_info_files() and process_delete_presets() in
the background sync thread instead of the UI thread, so their
HTTP DELETE calls don't block startup.
- Call reload_settings() directly from the background thread
instead of via CallAfter, so get_user_presets() (HTTP GET) and
load/save_user_presets (file I/O) run off the main thread.
- Guard update_side_preset_ui() and app_config->save() with
is_main_thread_active() / CallAfter so they're safe when called
from a worker thread.
- Simplifiy finishFn lambdas: the progress-dialog case only
destroys the dialog; the no-dialog case is a no-op.
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
HanifKoh