* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c97657432.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baedd.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Profiles for Creality K2 Pro printer
Added printer profiles for Creality K2 Pro based on existing K2 Plus profile and Creality Print modifications.
* Fixed filament start g-code for K2 series
K2 Plus filament profiles have additional move for filament start g-code on some filaments. This causes unnecessary moves and make filament profiles non-working on K2 series printers.
As these moves are already mirrored on printer profile and not used in rest of the K2 series they should be removed.
* Update Creality K2 Pro profiles for improved print quality
Added adaptive probing comments to machine start gcode for all nozzle sizes. Adjusted process profiles for various layer heights and nozzle sizes, including changes to bridge speeds, acceleration, wall generator and support line widths according to Creality profiles s to optimize print quality and reliability.
* Revert "Update Creality K2 Pro profiles for improved print quality"
This reverts commit ac84058c33.
* Update Creality K2 Pro profiles for improved slicing
Adjusted speeds, accelerations, line widths, and other slicing parameters for better print quality and compatibility. Updated machine start g-code to include print area comments for adaptive probing (Creality K2 Pro uses these comments to define adaptive probing area)
* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer.
* Change Ironing angle offset range from [-1,359] to [0,359].
-1 is redundant because it is the same behavior as 0 offset.
* Change ironing_angle new default value to 0.
* Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value.
* Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle.
* Add u8 prefix for degree symbol string
* Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used.
* Update quality settings wiki for Ironing
* Set f->is_using_template_angle when making ironing filler objects
* Update quality_settings_ironing link from #angle to #angle-offset
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* add creality ender-5 max
* add filament profiles for ender-5 max
* update creality manifest
* fix references
* put creality.json at 4 space indent
* remove invalid parameters
* fix thumb format
* Merge branch 'main' into feature/ender-5-max
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
* Replace M109 S[material_print_temperature_layer_0] with M109 S[first_layer_temperature]
* Change line width to match nozzle
* Change line_width for Ender-3 S1 Plus
* Update creality_cr10se_buildplate_model.stl
* Change line width to match nozzle size (Ender3v3SE)
* Fix Ender-3 S1 Plus 0.8 bed size
* Enable Z-hop for Ender-3 S1 Plus
* Trying something
* Update creality_ender3s1plus_buildplate_model.stl
* Fix CR-10 SE print size
* Various Flying Bear fixes
* Try fixing error
* Revert "Try fixing error"
This reverts commit e42e016e4a.
* Add minor Ender-3 V3 KE improvements
* Maybe this will fix the error?
* Revert "Maybe this will fix the error?"
This reverts commit 5e7873251b.
* Revert "Various Flying Bear fixes"
This reverts commit babca572dc.
* Fix CR-10 SE G-Code
Recommended by @bkonosky
* Minor changes to Ender-3 V3 KE
* Probe when bed is heated (Ender-3 V3 KE)
* Minor changes to Ender-3 V3 KE
* Fix oozing (Ende-3 V3 KE)
* Change retraction settings
* Use different retraction settings
* Revert "Use different retraction settings"
This reverts commit 854decf848.
* try this
* Remove "role_based_wipe_speed": "0",
* Add changes from CR-10 SE Config #4966
* Add "role_based_wipe_speed" : "0",
* Up retraction speed
* Missed this
* Resolve merge conflicts
* Resolve merge conflicts
* Change retraction & wipe speed
* Revert line removal
* Change wipe_speed to 200mm/s
* Forgot the 0.16mm
* Add BED_MESH_CALIBRATE PROBE_COUNT=6,6
* Improve for Matte PLA
* Compensate for fan speed
* Fix CANCEL_PRINT bug
* Move SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 to start g-code
* Disable infill combination for 0.2 & 0.24
* Fix end G-Code
* Disable arc fitting
This fixes the merge conflict
* temp
* Revert "temp"
This reverts commit 4bbc028ade.
* e3v3se: remove jerk settings from processes
Remove jerk settings from Ender3 V3 SE processes to prevent emission of M205 into gcode.
This is due to E3 V3 SE does not use jerk, but has junction deviation
enabled instead. Those two modes are mutually exclusive according to
marlin configuration page:
https://marlinfw.org/docs/configuration/configuration.html#default-acceleration-https://marlinfw.org/docs/configuration/configuration.html#junction-deviation-
Based on M503 output, E3V3SE hase junction deviation enabled:
echo:; Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
echo: M205 B20000.00 S0.00 T0.00 J0.10
"M205" emitted into gcode is useless since setting jerk settings via
"M205 Xn Yn Zn" does not have any effect on the stock V3 SE firmware.
* e3v3se: update machine retraction settings
Set retraction speed to 40 mm/s as recommended by Creality
Source: https://wiki.creality.com/en/ender-series/ender-3-v3-se/quick-start-guide/user-manual
Set retraction acceleration to 500 mm/s2 to prevent extruder clicking on retraction.
* e3v3se: update start gcode
* Set and wait for bed temperature to stabilize prior to homing.
Bed mesh calibration is done with the bed temp set to 60C.
Performing G28 with bed at room temperature will not compensate
for thermal deformation introduced by heated bed if there are any.
* Remove explicit mesh levelling enable (M420).
Creality FW auto enables M420 once homing (G28) is complete:
"M420 S1 Z10.00"
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update Creality Sermoon V1 0.4 nozzle.json
Changed the default process for the Sermoon V1 Printer.
* Update 0.20mm Standard @Creality Sermoon V1.json
Reduced speeds of .20mm process for Sermoon V1 to no more than 195mm/s as not all printers which may use this are running Klipper. It is set to Marlin for the flavour but is targeted at a Klippered printer.
* Update 0.16mm Optimal @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.20mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.28mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
* Add CR-10 SE and standard profiles
* Misc
Add more perimeters to CR-10 SE profiles
Add printer to filament profiles
Link everything in Creality.json
* Fix two bugs
* Forgot this
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
* Add Ender-3 Pro cover
* Add Ender-3 Pro
* Add Ender-3 Pro .2, .4, .6, and .8
* Add Ender-3 Pro processes
* Delete Ender-3 Pro_cover.png
* Add a smaller version of Ender-3 Pro_cover.png
* Delete Ender-3 Pro_cover
* Further image improvements
* Some improvements for supports and machines limits
* Increase z-hop for KE to avoid the nozzle hit the parts
* Changed jerk V3 KE settings to more logical values.
* Decreased jerk
* Speed, acceleration and jerk settings fine-tunings.
* Ender 3 - All nozzles and Quality Profiles
Ender 3 Profiles.
0.20 Nozzle
0.40 Nozzle
0.60 Nozzle
0.80 Nozzle
0.12 to 0.24 Quality Profiles for every Nozzle in Process Folder
* all
all
* Ender 3 Profiles
Ender 3 Profiles for: 0,2;0,4;0,6;0,8
5 Different and independent Quality profiles for each Nozzle.
Fine, Optimal, Standard, Draft and Superdraft
* aa
aa
* aa
aa
* aa
aa
* Prusa Mk3s Profiles
Prusa Mk3s Profiles
* Mk3s FIXED
mk3s FIXED
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Added K1C and fixed some settings (took from config files instead of Creality Print)
* Files renaming
* New PLA-CF, prettify json for K1C, naming uniformisation, ...
* Port Special PLA profiles to K1/K1 Max
* Changed slow down layer time and slow down min speed in order to improve overall speed on details.
* Raised PLA bed temp to 55°C
* Optimisations for ABS, ASA and added Generic PC profile.
* Added PA-CF and fixed PC profiles.
* Added new filaments to default materials
* Fixed retraction speed and added missing parameters.
* Fixes for manual filament change
* More tunings and fixes.
* Fixes and tunings
* Formatting
* Decrease z-hop for K1
* Updated thumbnails sizes to the same as Creality Print has.
