A valid mixed filament already slices the same on the CLI as in the GUI;
these are the places where the CLI still skipped a rule the GUI applies.
- Keep the prime tower when a mixed filament is used, even if every
--load-filaments preset is the same. A mixed filament swaps between its
components every layer, so turning the tower off left the swaps with
nothing to purge on.
- Leave a mixed slot's row and column of the flush matrix at zero when
--filament-colour triggers a recompute, as the GUI does; a mixed slot
never reaches a nozzle.
- Refuse a mixed slot that has no filament of its own. Feature filament
ids aimed at it were past the filament count, got reset to filament 1
and the model silently printed in one colour.
- Refuse a plate that uses a mixed filament whose components are
different filament types, the type half of the GUI's
Sidebar::has_broken_mixed_filament. Missing or out-of-range components
are already rejected for the whole project by validate().
get_extruders_under_cli gains an expand_mixed_slots flag so the gate
can see mixed slots rather than their components; existing callers
keep the expanded list.
Both refusals exit with the new CLI_MIXED_FILAMENT_INVALID (-69).
A build without SLIC3R_PCH had never been tried on macOS. Three files
used what pchheader.hpp happened to include: LocalesUtils.cpp needs
<sstream> and <iomanip>, and the two dialogs need <wx/tooltip.h>. The
GTK port's headers and libstdc++ pull these in transitively, the Cocoa
port's headers and libc++ do not.
Tiles previously rendered a colored monogram (title/source initials plus an ordinal) with a per-id hue. Show the matching native SVG icon instead:
- AppAction/NativeCommand gain an `icon` field; commands get a curated key->icon table and settings inherit their group header's icon.
- Notebook tracks each page's resource icon name and reports it in tab_options(), so the tab picker can show it too.
- Searcher records the group icon so settings keep it through search.
- Web tile rendering swaps monogramFor/hue for an <img>; drop the now-unused hue/text CSS vars. Add a test asserting every non-empty icon resolves to a shipped SVG.
# Description
Each plate keeps a registry of the instances it holds
(`PartPlate::obj_to_instance_set`). The plate's filament list
(`get_extruders`), its wipe tower preview and position clamp, the object
list grouping and the saved project's per-plate instance list all read
it. Two paths left it stale:
* `Plater::increase_instances` (the `+` key / toolbar) adds the copy to
the model but never registers it with any plate.
* `GLCanvas3D::do_move` (drag release and arrow keys) ended with
`notify_instance_update(-1, 0)`, so only instance 0 of each selected
object was re-registered. Rotate, scale and mirror already notify every
instance.
So a copy created with `+` and dragged onto another plate stayed unknown
to that plate: the project saved afterwards listed it on no plate, and a
multi-filament copy moved onto a single-filament plate drew no wipe
tower there and never got its tower position clamped. The Print side
selects instances by geometry, so the plate still sliced, which is why
this went unnoticed.
This PR
* registers new copies with their plate at creation;
* has `do_move` notify exactly the instances it moved (every instance of
the object when a part was moved in Volume mode), rather than instance 0
or all instances - notifying an instance that stayed put invalidates its
plate's slice result, so `(-1, -1)` as used by rotate would have
un-sliced every plate holding a sibling copy;
* drops the registry entry again when `decrease_instances` removes a
copy.
A second commit finishes the switch #15532 started with
`contain_any_instance_totally()`: `get_extruders_without_support()`,
`check_single_extruder_mixed_filament_risk()` and
`check_compatible_of_nozzle_and_filament()` still tested instance 0
only, so an object whose copy - not its original - sits on the plate was
skipped by all three.
No new options, no format change. The `is_new` flag is deliberately not
passed for the copies: a copy landing on a spiral-vase plate gets the
same "apply spiral mode settings?" prompt a dragged instance gets,
instead of a silent rewrite of the object's settings.
# Screenshots/Recordings/Graphs
Before:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/3cf9f5a9-1a4e-41e8-8c57-578f849d8c29"
/>
After:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/1b801a7e-b7cd-4ffb-bd1d-b701f90dade6"
/>
## Tests
Re-run after the rebase, both binaries driven through the same headless
harness (Xvfb 1920x1080, llvmpipe) on the same fixture: `cubeA`
(filament 1) alone on plate 1, `cubeB` (a two-part object, filaments 2
and 1) alone on plate 2, so plate 1 shows no wipe tower at load. Select
the plate-2 object, press `+`, walk the copy onto plate 1 with 36 x Left
(10 mm per press, one `do_move` each), save, slice plate 1.
Before is main `8af92214d0` - i.e. with #15532's
`contain_any_instance_totally()` already in place, so the only
difference is this PR.
* **Before:** the saved `model_settings.config` lists plate 1 with
`cubeA` only and plate 2 with `cubeB` instance 0. The copy (instance 1)
is listed **on no plate at all**, and plate 1 draws no wipe tower even
though a two-filament object is sitting on it.
* **After:** plate 1 lists `cubeA` **and** `cubeB` instance 1; plate 2
still lists instance 0. The plate-1 tower preview appears, and slicing
plate 1 succeeds with the tower actually generated - the filament panel
reports 1.10 m / 0.48 m in its Tower column over 51 filament changes,
and the G-code carries `EXCLUDE_OBJECT_END NAME=cubeB.stl_id_1_copy_0`.
Same camera and fixture on both runs, so the screenshots above are
directly comparable.
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
get_extruders() and estimate_wipe_tower_size() already ask whether any
instance of an object sits on the plate; the support-less extruder scan, the
mixed-filament risk check and the nozzle/filament compatibility check still
tested instance 0 only, so an object whose copy - not its original - was
placed on the plate was skipped by all three.
An instance added with "+" was never registered with the plate it landed on,
and moving an instance only re-registered instance 0 of its object, so a copy
dragged onto another plate stayed unknown to that plate's registry. The
plate's filament list, its wipe tower preview and the position clamp all read
that registry, so a multi-filament copy moved onto a single-filament plate
drew no tower there and its tower position was never clamped.
Register new copies at creation, notify exactly the instances a move changed
(every instance of the object when one of its parts moved), and drop the
registry entry when a copy is removed again.
Lam Wei Lun