* Grid non-crossing for multiline
cleaning
Replaced negative offset logic with surface contraction to reduce overlap with perimeters.
center the infill
filltriangles
update triangles
preallocate memory
Update FillRectilinear.cpp
Update FillRectilinear.cpp
overlapp adjustment
Fix Crash
Update FillRectilinear.cpp
density tunning
density tunning
fine tunning
reserve polilines
Grid non-crossing for multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: discip <53649486+discip@users.noreply.github.com>
* Improve multiline fill offset and polyline closure
Changed offset type from jtRound to jtMiter in multiline_fill for better geometry. Updated polyline conversion to require at least 3 points and ensured polylines are closed if not already. Updated FillGyroid, FillTpmsD, and FillTpmsFK to pass the 'close' argument to multiline_fill.
cleaning
FillAdaptive Noncross
Only use clipper if worth it
safeguard
fix overlap
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
Update FillRectilinear.cpp
fix 3d honeycomb
Simplify polylines
Update FillBase.cpp
Update FillBase.cpp
cleaning
Improved Multiline Function
This ensures `multiline_fill()` will correctly generate multiline infill with
closed loop polylines if the input infill line is a closedloop polyline. This
ensures that the multiline infill doesn't have little gaps or overlaps at the
"closed point" of the original infill line.
This changes how the tangent is calculated for the first and last points in a
polyline if the first and last points are the same, making it a closed loop.
Instead of just using the first or last line segment, it uses the line segment
between the points before the last point and after the first point, the same
way that all the other poly-line mid points are handled.
It also uses eigen vector operations to calculate the points instead of
explicitly calculating the x and y values. This is probably faster, and if not
then it is at least more concise.
Hibrid Multiline Function
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
clipperutils multiline hibrido
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
multiline hibrido
arc tolerance
multiline con union
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: Donovan Baarda <dbaarda@gmail.com>
* Switch multiline offset logic to Clipper2
Replaces Clipper-based multiline offset logic in FillBase.cpp with Clipper2, using InflatePaths and Union for offsetting and merging. Adds new conversion utilities in Clipper2Utils for handling Paths64 to Polygons/Polylines and updates headers accordingly.
* Refactor multiline_fill to always use Clipper2 logic
Removed the 'use_clipper' parameter from multiline_fill and updated all callers to use the new signature. The function now consistently applies Clipper2-based offset logic for multiline infill, simplifying the code and ensuring uniform behavior across fill patterns.
* Change offset join type to Round in multiline_fill
Replaces the Miter join type with Round in the InflatePaths call within multiline_fill. For smotther print travels.
* Increase max infill multiline to 10
Raised the maximum allowed value for the 'Fill Multiline' infill parameter from 5 to 10 to support more lines in infill patterns.
* Refactor multiline_fill to optimize offset logic
Replaces manual conversion of polylines to Clipper2 paths with Slic3rPolylines_to_Paths64 and filters short paths using std::remove_if. Uses ClipperOffset for path inflation and streamlines merging and conversion to polylines, improving performance and code clarity.
* half iteration because is bucle
* Funciona 1
Refactored the multiline_fill function to streamline the insertion of center lines by directly checking for odd line counts and removing redundant logic. This improves code clarity and reduces unnecessary checks.
* Refactor multiline_fill for improved offset logic
Reworked the multiline_fill function to simplify and clarify the logic for generating multiple offset lines. The new implementation computes offsets more explicitly for odd and even cases, creates a fresh ClipperOffset for each band, and improves conversion between Clipper2 paths and polylines. This enhances maintainability and correctness of the multiline fill generation.
* Quartercubic multiline
* fillplanePath
fix bounding box
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fillconcentric multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Update FillBase.hpp
* cleaning
* Refactor multiline_fill to clean polylines and reuse offsetter
Invalid polylines with less than two points are now removed before processing. The ClipperOffset object is created once and reused for each offset, improving efficiency and code clarity.
trigger build
* Optimize Filltrapezoidal
Refactored the trapezoidal fill pattern generation to precompute base row templates and reuse them with vertical translation, reducing redundant computations and improving code clarity. This change enhances performance and maintainability by avoiding repeated construction of row patterns within loops.
* Replace push_back with emplace_back for Polyline points
Updated Polyline point insertion from push_back to emplace_back for efficiency and clarity. Also refactored row copying logic to avoid in-place modification, improving code readability and safety.
* Update FillRectilinear.cpp
* Reserve space for poliline points
* Union not needed
* Update FillRectilinear.cpp
* unused functions
* compactado
Update FillRectilinear.cpp
* Adjust minimum rows for better performance
* Update FillRectilinear.cpp
---------
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
Co-authored-by: Donovan Baarda <dbaarda@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Fix infill anchor missing
* Correctly process cases without fill lines in FillRectilinear::fill_surface_with_multilines()
* Fix infill anchor missing for several other infill patterns
* Fix infill anchor missing for rectilinear and aligned rectilinear infill pattern
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* ENH: Enabled gap fill algorithm for all solid fill types
* Made gap fill an option & refactored code into its own method
* Code comment updates
* Converted gap fill to enum and control filter out gap fill in the UI
* Update label for consistency
* Spelling mistake
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Previously grid infill may be cut, so the strength on one direction is too weak. Now we switch the order at neighboring layers, so the strength of both directions are good enough.
Change-Id: I0ba768eeee34ce430e43ea57d8f06c209d469d39
Disable the spacing adjustment by bounding box before
fixing, to avoid overflow in some cases.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I13c751c8d46040156d79c1fdfc513f22f5e40fe2
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
