OrcaSlicer.cpp and several tests set _WIN32_WINNT, WIN32_LEAN_AND_MEAN or NOMINMAX before including Windows.h, and the profile validator defines NANOSVG_IMPLEMENTATION before any libslic3r header. The added includes had landed above those blocks, which broke the Windows build.
Covers src/slic3r/Utils, src/slic3r/plugin, src/slic3r/Config, src/libvgcode, src/dev-utils, src/OrcaSlicer.cpp and tests/, the directories left after src/slic3r/GUI and src/libslic3r. Generated with clang-tidy misc-include-cleaner. libvgcode's own headers are included by relative path as in the rest of that library, and Catch2 and pybind11 with angle brackets as elsewhere in the repo.
Fan speeds, multi-tool ramming, the tower interface and flush temperature
fallbacks and the custom G-code placeholders now use the extruder variant a
filament prints with on each layer, instead of reading by filament id.
Include variant-aware validation, temperature and pressure controls, named nozzle selection, and filament sidebar refresh.
Co-authored-by: Codex <codex@openai.com>
The slice check centres its cube on the bed, puts the prime tower beside
it, then pulls the tower alone inside the printable outline. On a bed too
narrow for the estimated footprint that pull drags the tower back over
the cube: Volumic EXO42 IDRE MIRROR MODE (189 mm wide, 87.6 mm estimate)
logged "gcode path conflicts found between WipeTower and cube" in every
run, and three ~105 mm beds were left with 0.15 to 3.3 mm of clearance.
The cube and the tower's footprint are now pulled inside as one rigid
pair, so the clearance between them is fixed by construction. A bed too
small for the pair keeps the old placement, and presets that were never
clamped keep their exact layout.
The validator forces a two-filament print with the prime tower on and
slices it at the config default position (x 15, y 220), which lies off
any bed shallower than the tower. It calls validate() but slices
regardless, so the off-plate tower was exported silently; with the
generation-time footprint check it is rejected instead, and 522 of the
1013 printer presets failed the slice check.
The validator now positions the tower the way the GUI and CLI do before
slicing: beside the centred cube, clear of the edge exclusion strips some
beds carry, then pulled inside the printable outline by the tower's own
estimated footprint.
The sweep now validates each printer with the filament that printer ships, so a run
over every vendor reports what a single-vendor run does. Validator only - no change
to slicing output or shipped profiles.
* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
* validator: detect duplicate filament subtype per printer (opt-in)
A filament is matched from the AMS by (filament_id + printer compatibility);
if two compatible filament presets for one printer share a filament_id, the
match is ambiguous and the runtime silently picks whichever loads first.
Add PresetBundle::check_duplicate_filament_subtypes(), gated behind a new
has_errors(check_duplicate_filament_subtypes) parameter and the validator's
-f/--check_filament_subtypes flag (off by default). For each system printer it
groups its vendor's compatible filament presets by filament_id and errors on
any group of 2+, reporting each preset as a clickable file:// URI with a single
"how to fix" hint. CI runs it for BBL only (-v BBL -f) until the other vendors'
profiles are cleaned up.
* profiles: fix ambiguous BBL filament matches
Resolve the duplicate-filament-subtype errors flagged by the validator:
- align compatible_printers with Bambu Studio where Orca over-claimed a nozzle
that already has a dedicated preset (Bambu PLA Basic/Matte/ABS @BBL H2DP;
Bambu ASA/PETG HF @BBL H2DP 0.6 nozzle; Fiberon PETG-ESD @BBL X1)
- fix a copy-pasted printer name in Overture Matte PLA @BBL A1M 0.2 nozzle
- fix a wrong inherits in Panchroma PLA Silk @BBL X1C 0.2 nozzle (was inheriting
Panchroma PLA @base, giving it filament_id GFPM001 instead of GFPM004)
Bump BBL profile version.
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
Move many third-party components' source codes from the src folder to a new folder called deps_src. The goal is to make the code structure clearer and easier to navigate.
Hanif Koh