# Description
Adds a --slice (-s) mode to the profile validator that slices a
two-colour cube through every shipped printer, expanding all custom
g-code (change_filament_gcode, machine start/end, etc.). This catches
invalid-placeholder / bad-flow / slicing errors that the static JSON
checks and unit tests can't see.
Included:
- Validator: new -s sweep mode; per-profile error attribution in the
log; resolves the synthetic 2nd-filament nozzle-mapping so multi-nozzle
BBL printers (incl. the Direct-Drive+Bowden X2D) validate cleanly.
- CI, two complementary paths:
- check_profiles.yml — runs the sweep on profile-only PRs (nightly
binary).
- build_all.yml — new parallel slice_check_linux job runs it on
engine/src PRs with the PR-built binary (build_all doesn't trigger on
resources/**, so no overlap). Runs off the build's artifact, so it
doesn't lengthen the build leg.
- Profile fixes surfaced by the sweep: Creality, FLSun, Ginger, Qidi,
RatRig, iQ.
- Engine: whitelist BBL firmware T-opcodes (T1001/T65279/T65535) in the
time estimator (log-only, no g-code change); dedupe a
per-filament/per-layer log flood in get_config_index.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The new "Prime-tower visits..." test from #14685 (H2C/A2L support) throws
"Coordinate outside allowed range" at random on CI, on both Windows arm64 and
Linux x86_64. It's an uninitialized read of WipeTowerData::height.
#10780 (H2D/H2S) added a second wipe tower path, generate_new(), that fills in
depth, bbx, brim_width and rib_offset but not height. The older generate() sets
height, and clear() never did, so on the generate_new path it stays garbage.
first_layer_wipe_tower_corners() passes height to get_wipe_tower_cone_base() as
R = tan(cone_angle/2) * height. The stray bytes are usually zero, so R is zero
and the slice is fine, which is why it passes most runs on every platform. When
they aren't zero the cone radius runs past ClipperLib's limit and the slice
throws. Nothing selects for it, so it just flakes around.
#14685's test is the first to exercise this path, so that's when it started
showing up.
Initializing height in clear() fixes it, same as the m_origin fix in #13712. The
BBL generate_new path has no stabilization cone, so height = 0 is right.
When the per-layer filament selector (enable_filament_dynamic_map)
migrates a filament across nozzle variants (e.g. Standard -> High Flow),
the config write-back only stored the derived extruder map; every
per-variant filament value (retraction, nozzle temperature, flow,
flush...) kept the numbers resolved from the pre-slice static mapping.
Now both dynamic write-back sites (the by-layer branch and the
sequential stitch) branch on the result's dynamic support. Migrating
results run a mixed-filament expansion that regathers every
filament_options_with_variant key from the pristine per-variant
superset, giving a migrating filament one config slot per (extruder
type x nozzle volume type) it lands on - filament_self_index,
filament_extruder_variant, and all value arrays grow in lockstep - and
recompute the retract overrides with per-slot machine indices so a nil
slot falls back to its own variant's machine value. Non-migrating
dynamic results take the merged three-map write-back so re-applies
reproduce from the written maps. Unrouted filaments resolve from the
result's own default map, so slot resolution never depends on
filament_map round-tripping through the plate config.
Print::apply reproduces the identical expansion from the persisted
group result (shared dedupe helper, expansion function, and slot
indices on both sides): the expanded keys sit in the psWipeTower /
psGCodeExport invalidate lists, so without the reproduction every
re-apply after a selector slice would diff non-empty and permanently
invalidate. cal_non_support_filaments now resolves the extruder per
layer from the published result for dynamic groupings.
filament_map_2 keeps its apply-time static derivation; nothing on the
dynamic path reads it (the per-slot machine indices key the override
merge), and per-(extruder x volume-type) machine limits in the g-code
processor remain a documented follow-up.
Every change is gated behind is_dynamic_group_reorder() or a persisted
result with dynamic support; no profile sets the flag, so the static
fleet's instruction stream is unchanged (20/20 pinned-slice byte gate
identical, incl. the sequential repro sliced twice, deterministic).
Tests: expansion unit coverage (migrating slots, unrouted fallback via
the default map, mis-sized volume map ignored, nullable retract keys in
lockstep, slot machine index layout), an end-to-end stub-driven
write-back asserting expanded slots, per-layer config-index resolution,
the override merge incl. the nil-slot variant fallback, and re-apply
stability, plus a real selector slice staying valid across re-apply.
Suites green (libslic3r 48987/168, fff_print 633/60).
Sequential (by-object) prints were incoherent with the per-layer filament
selector (enable_filament_dynamic_map): the by-object branch published a
static grouping while each per-object ToolOrdering independently ran the
dynamic planner from an empty nozzle status and wrote its own map to the
config (one write per object, last object wins). The exported toolchange
sequences then disagreed with the published result that drives the
per-layer maps, placeholders, and selector emission.
Now the by-object branch, when the selector is enabled, plans each unique
object once — threading the physical nozzle occupancy and the previous
object's last filament into the next plan — stitches the per-object
per-layer nozzle maps into one print-wide result (gap-filled by the new
normalize_nozzle_map_per_layer so any layer index resolves a filament's
nozzle consistently), publishes it, and writes the derived extruder map
back once. The plans are cached on the Print and g-code export consumes
the cache: the ToolOrdering seed changes the plan input (dontcare
assignment, first-layer reorder), so a fresh export-time construction
could re-plan differently from the published stitch. The per-object
dynamic write-back is gated off for sequential prints.
Every change is gated behind is_dynamic_group_reorder(); no profile sets
the flag, so the static fleet's instruction stream is unchanged (20/20
pinned-slice byte gate identical, incl. the by-object repro sliced twice).
Tests: normalize unit coverage (carry-forward, back-fill, ragged input),
stitched-blocks selector detection, and an end-to-end by-object selector
slice (apply -> process -> export) asserting the published stitched
result, one cached plan per object, the config write-back, and a clean
export. Suites green (libslic3r 48958/165, fff_print 633/60).
* ENH: config: add logic to apply params to object/region config with multi-extruder
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
(cherry picked from commit 3179fd416e68ca8bc2d746f859508d07db18fe5b)
* FIX: X1C switch to H2D lose Highflow parameter
Jira: STUDIO-15272
Change-Id: Id8cf5d93a49d5542ac82f9554974b458e15c1193
(cherry picked from commit 15d9f072ff658a3beb4f916d978dfea12c2d9f16)
* Fix mishandling of `stride` param and add unit test for it
* Fix modified multi-variant per-obj option highlight
* Fix issue that per-obj FloatsOrPercents options are marked as dirty incorrectly when lost focus
---------
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: weiting.ji <weiting.ji@bambulab.com>
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
- Print::get_nozzle_config_index / get_filament_config_indx resolve a
filament's variant slot per layer from the nozzle group result, with
hashed index caches; when no group result is published (sequential
prints), they fall back to the static filament->extruder mapping so
behavior is unchanged
- filament_map_2 caches each filament's resolved print-variant slot;
rebuilt in Print::apply after the filament_map diff handling and in
the filament-map write-back
- filament retract overrides now key by slot indices: apply_override
fallback indexing flips to 0-based, Print::apply passes
filament_map/extruder indices, the write-back passes filament_map_2
(identical resolution while slots equal extruders)
- filament_volume_map/filament_nozzle_map/filament_map_2/
filament_self_index become PrintConfig static members (required for
member access); grouping input guards tightened so their registered
1-element defaults are never mistaken for real per-filament maps
(single-filament manual mode keeps the mix-marker fallback)
- update_filament_self_index_cache refreshed at every full-config
assignment
- tests: 0-based apply_override fallback, get_config_index_base
hit/miss/mixed-type cases
The resolvers are not consumed by the g-code writer yet. Non-Hybrid
g-code is unchanged except the config header, which now serializes the
three new static keys (defaults until the per-filament producer lands);
verified by the 19-fixture byte gate: 3 added header lines per fixture,
zero motion changes.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
Refactor skirt and brim ownership and emission flow
Refactor skirt and brim generation around a common object/group
ownership model.
Skirts and brims are now emitted as a coordinated preamble
(skirt -> brim -> object) instead of being generated and emitted
through multiple independent code paths.
Changes:
- Fix repeated skirt emission caused by the previous skirt state
tracking logic.
- Restore local skirt/brim ordering for per-object skirts in
By Layer mode.
- Emit brims together with their owning object or object group.
- Handle combined brims independently from skirt grouping.
- Handle draft shields through the same ownership model as skirts.
- Fix draft shield generation when skirt height is zero.
- Generate draft shields after brim geometry is known, preventing
draft shields from overlapping brims.
- Reject unsafe grouped per-object skirt configurations in
By Object mode.
- Remove legacy skirt emission paths and state-management
workarounds.
Support brim generation remains unchanged.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
The WipeTower2 code path never called construct_mesh(), leaving
wipe_tower_mesh_data as std::nullopt. GCode export then dereferenced
it unconditionally, triggering an assertion failure / crash.
Port Z Anti-Aliasing from BambuStudio-ZAA (https://github.com/adob/BambuStudio-ZAA)
to OrcaSlicer. ZAA eliminates stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and micro-adjusting
Z height to follow the actual surface geometry.
Key changes:
- Add ContourZ.cpp raycasting algorithm (~330 lines)
- Extend geometry with 3D support (Point3, Line3, Polyline3, MultiPoint3)
- Template arc fitting for 2D/3D compatibility
- Change ExtrusionPath::polyline from Polyline to Polyline3
- Add 5 ZAA config options (zaa_enabled, zaa_min_z, etc.)
- Add posContouring pipeline step in PrintObject
- Update GCode writer for 3D coordinate output
- Add ZAA settings UI in Print Settings > Quality
- Add docs/ZAA.md with usage and implementation details
ZAA is opt-in and disabled by default. When disabled, the slicing pipeline
is unchanged.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
