Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Imported Artillery M1 Pro profiles from ArtilleryStudio
* Removed duplicate overhang_fan_speed - keeping 90 as other profiles
* Replace by octo/klipper as it seems Artillery made a custom host_type on ArtilleryStudio...
* Changed sparse_infill_pattern to gyroid for M1 profile, as suggested
* Update Artillery Genius & Sidewinder profiles
- Fixed bed-size of Genius (Pro) profile.
- Fixed default retraction values for the Artillery Genius (Pro) 0.4 profile,
which were set too high for this direct-drive machine.
- Slightly increased default retraction value for Sidewinder X1 & X2, to match
the Genius profiles. Tested values on all machines.
- Matching minimum layer height for Genius & Sidewinder profiles.
- Fixed line endings & indentation.
* Add & revise FLSun Profile
FLSun Q5
FLSun QQ-S Pro
* Patch Artillery Sidewinder X2 profile
revision speed parameters
revision start & end code
* change Anycubic 4Max Pro image
* Adjustments to the profile of the Anycubic 4Max Pro
Preparation for adding more Anycubic printers
* add more Anycubic profiles
