Fix crash in PA calibration pattern generation
Reset current extruder ID and clear pointers in set_extruders to prevent dangling pointers when extruders are recreated. Also fixed undefined behavior by checking if the vector is empty before taking max_element.
Co-authored-by: SoftFever <softfeverever@gmail.com>
## Summary
- Change default bed temperature type from "By First filament" to "By Highest Temp"
- Move `bed_temperature_formula` option from develop mode to advanced mode for better accessibility
- Relocate UI control from "Basic Information - Advanced" to "Multimaterial Setup" section where it's more relevant for multi-filament printing
Using the highest temperature of all printed filaments is generally safer for bed adhesion than using the first filament's temperature, especially in multi-material prints where different filaments may require different bed temperatures.
<img width="390" height="239" alt="Screenshot 2026-02-26 at 18 44 56" src="https://github.com/user-attachments/assets/0fe9f8c7-062a-4a7a-8ab3-c52df7e74b26" />
# Description
This PR enhances the GCodeProcessor's time estimation by incorporating Junction Deviation (JD) into the jerk calculations, providing more accurate print time predictions for firmwares that use JD (like modern Marlin).
Key Changes:
- Added JD support to time estimation
- Reads machine_max_junction_deviation (machine limits) and default_junction_deviation (print profile)
- When JD is enabled (>0), replaces traditional X/Y jerk values with JD-based calculation:
$Jerk = \sqrt{2.5\cdot JD \cdot acceleration }$
- Falls back to traditional jerk when JD is not used
# Test:
JD:0.0256mm Accel.: 1000 mm/s²
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/f0e95294-bfca-400e-bffc-8d615d051b70" />
Jerk: 8mm/s (equivalent)
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/8508727e-70f6-49ed-ac19-002db73e957b" />
JD:0.0128mm (4mm/s jerk)
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/91b04d3b-1b9e-48f4-b4b4-5addda2eff57" />
Added checks in ByLayer print sequence to handle ordering for Intra-layer ordering option. Prevents new ordering setup when "As object list" is enabled.
* Fix float number not working properly for option min/max (#11211)
* ConfigOptionDef: min/max values type are changed from INT to FLOAT.
(cherry picked from commit f277bc80c22e0c9a067481a4301922e2c96aed47)
* Fix infinite loop and crash when `fuzzy_skin_point_distance` = 0 (SoftFever/OrcaSlicer#11069)
* Fix Linux build issue
* Fix float comparison due to precision loss
* Fix: Range check added for coInt options; Ranges and defaults added in tooltips
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
print_machine_envelope() used get_extruder_id(extruder_id)*2 to index
machine limit arrays that only hold [Normal, Stealth] (2 entries).
For multi-extruder setups this went out-of-bounds, causing wrong M201/M203
values in the G-code which then override the estimator's correct limits.
Same class of bug as c6d1c11ebb but on the G-code writer side.
Changes:
- Remove unused extruder_id param from print_machine_envelope()
- Use .values.front() for M201/M203, matching M204/M205 in same function
- Change get_option_value() fallback from .back() to .front() so any
future out-of-bounds index returns Normal mode instead of Stealth
The extruder_id*2 offset in get_axis_max_feedrate/get_axis_max_acceleration
was cherry-picked from BambuStudio's per-nozzle limit system, which OrcaSlicer
never ported. Without that system the limit arrays only have 2 values
([0]=Normal, [1]=Stealth), so any extruder_id > 0 or the uninitialized
value (255) would overshoot the array and fall back to values.back(),
always returning stealth-mode limits and producing incorrect time estimates.
Revert to indexing by time mode only (matching v2.3.1 behavior) and simplify
the M201/M203 handlers to write only the two mode slots they actually use.
* Add Pressure Advance visualization support
Signed-off-by: minicx <minicx@disroot.org>
* Port Pressure Advance visualization to libvgcode architecture
Adapt PA visualization (originally in commit e3a77259) to work with
the new libvgcode library introduced by upstream PR #10735.
Changes across the libvgcode stack:
- PathVertex: add pressure_advance field
- Types.hpp: add PressureAdvance to EViewType enum
- ViewerImpl: add ColorRange, color mapping, range updates for PA
- LibVGCodeWrapper: pass pressure_advance from MoveVertex to PathVertex
GCodeViewer UI integration:
- Add "Pressure Advance" to view type dropdown
- Add PA color range in legend (3 decimal places)
- Add PA value display in sequential view marker tooltip
- Add PA row in position properties table
The GCodeProcessor PA parsing (M900, M572, SET_PRESSURE_ADVANCE)
is preserved from the original implementation.
* Tag Pressure Advance visualization changes with ORCA comments
Signed-off-by: minicx <minicx@disroot.org>
---------
Signed-off-by: minicx <minicx@disroot.org>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
- Add configurable GLEW_USE_EGL option (default OFF) to match wxWidgets
- Explicitly set wxUSE_GLCANVAS_EGL=OFF for vendored wxWidgets build
- Add compile-time check to detect EGL/GLX backend mismatch between
GLEW and wxWidgets, preventing silent rendering failures
The bug occurred when GLEW was compiled with EGL support (using
eglGetProcAddress) but wxWidgets created GLX contexts. This mismatch
caused OpenGL function pointers to fail loading, resulting in blank
3D model preview.
Co-authored-by: SoftFever <softfeverever@gmail.com>
Wipe tower interface features and preheat fixes
Fresh PR branch rebuilt on upstream/main (squash of origin/BBL-studio-wipe-tower-merge) to avoid merge-history issues.
* Add Rectilinear Support for Normal support type. Fix issue #9508.
* Remove duplicate the rotation logic, use raft_interface_angle function.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix extruder_id out-of-bounds in switch_excluder
Added a check to reset extruder_id to 0 if it exceeds the size of nozzle_volumes or extruders, preventing potential out-of-bounds access.
Co-Authored-By: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
* Add custom nozzle diameter option in sidebar
Ensures that if the actual nozzle diameter is not present in the list, it is added as a custom option. This improves user experience by allowing selection of non-standard nozzle diameters.
Refactor nozzle diameter selection logic in Sidebar
Simplified the logic for updating the extruder nozzle diameter combo box by removing redundant checks and streamlining the addition of custom nozzle diameters. This improves code clarity and ensures the actual nozzle diameter from the printer config is always considered.
Co-Authored-By: yw4z <yw4z@outlook.com>
* Prevent profile switch if selected diameter matches nozzle
Adds a check in Sidebar::priv::switch_diameter to avoid switching printer profiles when the selected diameter matches the current nozzle diameter in the configuration. This prevents unnecessary profile changes and improves user experience.
---------
Co-authored-by: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
Co-authored-by: yw4z <yw4z@outlook.com>
* fixes: keys_map is initialized with itself [-Winit-self]
* fixes: operation on repeats may be undefined [-Wsequence-point]
* fixes: warning: suggest parentheses around && within || [-Wparentheses]
* fixes: moving brim_points to itself [-Wself-move]
* fixes: operation on unprintability may be undefined [-Wsequence-point]
* fixes: extra tokens at end of #endif directive [-Wendif-labels]
* fixes: converting to non-pointer type int from NULL [-Wconversion-null]
* review result: simplifies fix 'operation on repeats may be undefined'
# Description
The current bounding box selection display loses all usefulness once the furthest apart objects are selected.
This is especially noticeable on grid patterns, where nested unselected elements become indistinguishable after selecting all.
This PR implements a highlighting method that visually brightens individually selected objects.
# Screenshots/Recordings/Graphs
<img width="1845" height="829" alt="image" src="https://github.com/user-attachments/assets/a92a7176-182c-41e2-869e-badb220dfee2" />
Current 2.3.1: All but some objects are selected. Can you tell which ones?
<img width="2169" height="1042" alt="image" src="https://github.com/user-attachments/assets/c6c721d5-4f03-4c23-beff-b0acc0601568" />
Proposed PR: Slight lightening of selected objects
## Tests
Built on windows, tested with various colors and non-printable
Sorry had to re-create the PR as I did some chaos in my repo with CLI. xD
Fixes issue https://github.com/OrcaSlicer/OrcaSlicer/issues/10971
Description:
Fix wipe tower filament selection and clean up tool ordering. Added wipe_tower_filament handling to WipeTower2 (store config, mark non-selected tools as “soluble,” and use it in toolchange selection) and ensured the configured wipe‑tower extruder is included in the extruder list for ordering. Removed duplicated/merged tool‑ordering code (extra insert_wipe_tower_extruder definition, duplicate declaration, and redundant reorder block) so the tool order logic runs only once.
<img width="1819" height="799" alt="image" src="https://github.com/user-attachments/assets/cef39026-cf6a-46da-a87a-ef895774699f" />
