* Update fix model
* updated
* List missing files
* Orca Slicer to OrcaSlicer
* Revert "Orca Slicer to OrcaSlicer"
This reverts commit 711d796e05c4eaaa7579280f83f6ecd555fe3560.
* Only update date if a change was made
* Gcodewriter messages
* #13432 update
* Update OrcaSlicer_it.po
* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fixed PrintConfig.hpp order so Repetier outputs, updated ConfigWizard to use gcode_flavor value rather than static
Add Repetier to enum values and labels
Update to add Repetier base profile to the setup wizard
Re-order gcode_flavors in PrintConfig.hpp and PrintConfig.cpp to match
Revise ConfigWizard.cpp to use gcode_flavor rather than list order
Add Repetier profiles and include in custom.json (profile disables m73 and stop emit machine limits which Repetier doesn't use)
* Fix JSON formatting in Custom.json
* Add support for pressure advance in Repetier flavor
* Add Repetier flavor show motion ability tab is visible
* Refactor jerk handling for Repetier flavor
* Update resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update resources/profiles/Custom/machine/fdm_repetier_common.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* add back localisation flag for Klipper
* tidy up indentation and braces
* Space indentation for Repetier profiles changed to tab
* Fix space indentation in Custom.json file for Repetier profiles
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* fix: manual filament change not emitting MANUAL_TOOL_CHANGE for BBL printers
BBL-specific M1020 S handling in toolchange() bypassed toolchange_prefix(),so manual_filament_change had no effect — M1020 was always emitted regardless of the setting. Move the BBL logic into toolchange_prefix() so all callers respect the option consistently.
Fixes#11795
* add comment
Fix crash in PA calibration pattern generation
Reset current extruder ID and clear pointers in set_extruders to prevent dangling pointers when extruders are recreated. Also fixed undefined behavior by checking if the vector is empty before taking max_element.
Co-authored-by: SoftFever <softfeverever@gmail.com>
extrude_to_xyz() unconditionally emitted Z on every extrusion move
via emit_xyz(), even when Z hadn't changed. With ZAA enabled, this
produced ~987K redundant Z coordinates (98.2% of all Z emissions),
causing 10-20% file bloat.
Now compares quantized Z values before and after, and only emits Z
when it actually differs at export precision (0.001mm). Reduces
ZAA gcode Z emissions from 1,038,468 to 50,022 while preserving
all legitimate contouring Z changes.
* Emit Disable Power Loss Recovery
Now only works if it's enabled but the goal it's to force disable it.
With this change it will always emit the command for BBL or Marlin 2.
Co-Authored-By: Michael Rook <54159303+michaelr0@users.noreply.github.com>
* Refactor power loss recovery G-code comments
* Return empty power loss recovery when no compatible printer
* Update power loss recovery comments
Update label and tooltip for power loss recovery
* Add enum for power loss recovery mode
Refactored power loss recovery configuration to use a new PowerLossRecoveryMode enum instead of a boolean. Updated GCodeWriter and related logic to handle the new enum, allowing for 'printer_configuration', 'enable', and 'disable' options. Updated config handling, legacy value conversion, and default values accordingly.
* Update PrintConfig.cpp
---------
Co-authored-by: Michael Rook <54159303+michaelr0@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Spiral Z-Hop resolution
Use slicing resolution to determine segment count for emulated spiral Z-hop
What’s changed
The number of linear segments used to approximate a spiral Z-hop is now derived from the PrintConfig resolution value.
The segment count is clamped to a safe range (4–24) to avoid excessive G-code generation or MCU queue overflow.
Why
Previously a fixed 24 segments were always used, regardless of model resolution.
For small-radius spiral lifts this was excessive and could overwhelm some printers.
Adapting segment count to resolution ensures smooth motion where needed, but lighter G-code where possible.
Details
m_resolution is now stored via apply_print_config().
_spiral_travel_to_z() uses this value to compute segment count dynamically.
Only the linear-segment fallback path is affected; G2/G3 arc-fitting remains unchanged.
* Add ability to disable Power Loss Recovery
* Fix typo in PrintConfig.hpp for power loss recovery
* Attempt to resolve Unknown option exception: disable_power_less_recovery
Add disable_power_loss_recovery property to any json which had scan_first_layer
* Revert "Attempt to resolve Unknown option exception: disable_power_less_recovery"
This reverts commit ddaf34b317.
* Fix typo
* Change attribution from BBS to Orca in PrintConfig.cpp
* Mini refactor power loss recovery handling in GCode export
- Moved power loss recovery G-code generation to a new method in GCodeWriter.
- Support Marlin 2
* Update comments and power loss recovery handling
* Implement power loss recovery G-code commands
Added functions to start and end power loss recovery with appropriate G-code commands and comments.
* Add power loss recovery methods to GCodeWriter
* refactor and fix build errors
---------
Co-authored-by: Michael Rook <michael@rook.id.au>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
1.Immediate do lift in eager_lift function
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I931d22e901e2123bb886c31d8d1a5788fddeed42
(cherry picked from commit 6cea772d4f3b2f7e2a43c35a2271e4bdbba9eadd)
* Enhance GCode handling for Z-axis movements
- Updated `travel_to_z` method to include a `force` parameter, allowing forced Z movements.
- Modified GCode generation logic to ensure Z position is restored after unknown last positions.
- Enforce z restoreation after tool changer
* Improve filament_multitool_ramming logic
* fix indent
1.Should get value by filament id instead of extruder id
2.Fix many other issues caused by incorrect usage
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3278d7de0f8976a97c9e5ccef80bba4a58553f5a
(cherry picked from commit 30c51dd1171fc16ba778308745fab2eb246aedd0)
(cherry picked from commit e9027478f8948352d99d33519994b044ca18a65a)
Jira: none
if the fist print filement as same as the filament be set on start gcode
not insert filment change
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0114f287fff9be276a90772537d1910df18dec61
(cherry picked from commit 276c797faff1407b2c1606d4bfafe21773901001)
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* VFA-Calibs Wiki images
* Calib Code Fixes
Improve Settings
JD Set Precision to 3
Change damp default
Recommend 0
Fixes
* IS JD Wiki
* Updated with 9234
* IS Verbose
Avoid collisions with previous extrusions in the same layer when moving Z down in an XYZ move.
This happens for example when starting a scarf joint after another perimeter was already printed.
Fixes SoftFever#7191
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Wipe retraction adjusted based on available wipe distance and retraction speed
* Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option.
* Wipe improvements: Spelling & grammar
* Revert "Wipe improvements: Spelling & grammar"
This reverts commit c8f8612b3f.
* Revert "Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option."
This reverts commit ba515ffb62.
* Wipe improvements: Using retraction before wipe parameter to judge when to do excess retraction
* Wipe Improvements: Floating point comparison check
* Wipe Improvements: Refactoring the code
* Wipe Improvements: Updated Wipe Distance tool tip
* Wipe Improvements: Removed redundant code
* Wipe Improvements: Use unscale_
* Add "Manual filament change" option and logic
* make suggested changes
* make suggested changes
* change tag from "CHANGE_TOOL" to "MANUAL_TOOL_CHANGE"
* some tweaks
* More fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
