Upstream moved pressure advance onto the extruder variant: enable_pressure_advance,
pressure_advance and the four adaptive keys joined filament_options_with_variant,
the repeated inline blocks in set_extruder() became a helper, and the lookups
moved from the filament id to get_filament_config_index().
All three conflicts were the same collision, because this branch had modified two
of those same inline blocks to pass a tool qualifier so each carriage is addressed
explicitly in parallel modes. Taking either side whole would have lost something:
upstream's drops the qualifier and leaves parallel carriages with no pressure
advance, ours drops the per-variant indexing and reads the wrong column on a
multi-variant printer. The helper now takes an optional tool, defaulting to -1,
which omits the qualifier. imex_pem_tool_for() already returns -1 off IMEX and in
primary mode, so non-IMEX output is unchanged, and the three call sites that never
passed a tool keep upstream's behavior exactly.
The third conflict was two test cases appended at the same place. Both are kept.
Separately, one defect that merged cleanly and so was not flagged: the loop that
emits pressure advance for secondary carriages at the start of a print still
bounded and indexed those vectors with a raw filament id. They are variant
expanded now, so their length is columns rather than filament slots -- the value
read was the wrong column, and the bound no longer sat in slot space, letting an
out-of-slot filament through. It now bounds on filament_diameter and translates
with get_filament_config_index(), which is what the sibling second-layer
temperature loop already does.
Verified: both changed translation units compile clean under -Werror. The merge
was resolved independently twice and the two resolutions agree on every line of
code. Not yet run: the Release test suite and a parallel-mode slice sweep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
load_obj emits the second triangle of a quad from corners 0, 2 and 3,
but read its texture coordinates from corners 0, 1 and 2, so half of
every textured quad sampled the wrong part of the texture. The corner
indices are now passed down to where the coordinates are read.
A mesh with inward-facing triangles is flipped after loading, which
swaps corners 1 and 2 of every face. The texture coordinates were left
as they were. They are now swapped along with the corners.
Brings in nine commits, including stricter slice validation of custom G-code and
filename formats across system profiles, OBJ and DRC import hardening, and the
Ender-3 V3 SE extrusion mode fix. None of them touch the files this branch
changes.
* Validate OBJ Texture-Coordinate Indices
load_obj read the texture coordinates of a face without checking the
vt index, so a face referencing a vt past the end of the list read out
of bounds and crashed, and a face vertex with no vt read index -1.
Out-of-range or missing indices now fall back to a zero UV. The face
keeps its entry in the per-face UV list, so the following faces stay
aligned, and the geometry loads as before.
Negative (relative) vt indices were also rebased by dividing the float
count by 3, but each vt stores two floats.
* Reject DRC Meshes Without Positions or with Invalid Face Indices
load_drc dereferenced the POSITION attribute without checking that the
mesh has one, and trusted the decoded face indices, which the Draco
decoder does not check against the point count. Both now fail the load
cleanly. A failed vertex conversion is treated the same way.
The libslic3r tests link Draco so they can encode the malformed meshes
in-test.
* Keep OBJ Texture Coordinates That Carry a W Component
The vt parser stopped reading the optional third component when texture
coordinates were cut down to u and v, but the check that nothing is left
on the line stayed. A legal "vt u v w" line was therefore rejected and
silently dropped, shifting every later texture index. The w component is
parsed again and discarded.
The texture coordinate stride is now a named constant, OBJ_TEXCOORD_LENGTH,
used by the parser and the importer, so the relative-index rebase cannot
drift from the storage layout again.
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
The 3MF importers read XML entries into a single expat buffer whose size is
an int, while the archive extraction used the entry's 64-bit declared size.
The two could disagree for entries declaring more than INT_MAX bytes.
Reject such entries before allocating, and use one size for the buffer, the
extraction and the parse. This applies to the BBS importer, the PrusaSlicer
importer and the PrusaSlicer fingerprint probe. The load now fails with an
error instead.
* Reject 3MF Plate IDs Below 1 Instead of Indexing Before the Plate List
The plate importer copied each plater_id from model_settings.config into the
1-based plate list after checking only the upper bound, so plater_id="0"
wrote to plate_data_list[-1] and crashed on load. Both copy sites now reject
ids below 1 with the same "invalid plate index" error already used for ids
past the end.
* Drop Malformed 3MF Paint Data Instead of Reading Past the Bitstream
Painted facets are decoded from a bitstream a nibble at a time with no bound
check, so a truncated or corrupt paint string in a 3MF (for example split
codes with no children behind them) read past the end and crashed on load and
slice. A one- or two-side split naming side 3 also indexed past the triangle's
vertices.
Every nibble read now goes through a bounds-checked reader. Loading validates
each triangle's tree and drops a malformed one with a warning, so the stored
data, used extruder states and later decoding all agree. deserialize() also
unwinds and clears any triangle whose tree is incomplete or malformed, and
has_facets() stops at a truncated triangle. Valid streams decode unchanged.
* Add missing TopTools includes to GeometryEngine.cpp
* Add missing TDF_LabelSequence include in STEP.cpp
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
The parallel printing options shipped to testers as is_ixex and ixex_*,
became is_imex and imex_* when the feature stopped being called iXex, and
the two clearance keys were renamed once more to say what they measure:
nozzle to carriage edge on the collision side, not the carriage's full
width. Nothing translated any of it, so loading an existing printer profile
dropped every one of these values - the keys are unknown and cleared.
is_ixex is the one that matters most, because without it the others migrate
into a feature that stays switched off, leaving settings that look
configured and do nothing.
Per-plate mode is persisted twice and only one path went through
handle_legacy. Plate metadata in a 3MF is matched by exact attribute name
and written with set_key_value, so a project saved between the per-plate
mode landing and the rename loaded every plate back on Primary and sliced
single-carriage with no warning. The loader now accepts the old attribute
name.
ixex_primary_col and ixex_primary_row are dropped rather than mapped: the
primary is a role inside the mode's active-tools string now, not a grid
coordinate, and they were never in an option list, so no saved file carries
them.
The test drives the full era-1 key list and asserts the enum values rather
than non-nullness, since a forward-compatible substitution would otherwise
hide a failed deserialize behind a default. handle_legacy had no test before
this.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
import_presets reduced each zip entry to a basename by stripping only
'/', so on Windows an entry named with '\' separators kept its
directory components and was extracted wherever they pointed. Strip
both separators, and reject any entry whose name still escapes the
extraction folder.
The preset name from the JSON and the bundle id from
bundle_structure.json were joined onto the preset directory unchecked
as well, which let either of them write outside it on every platform.
Both are now validated before anything is written.
The check is the is_path_within_root helper the 3MF importer already
had, moved to Utils so both importers share it. It treats '/' and '\'
as separators on every platform, so a bundle that would escape on one
OS is rejected on all of them.
No IMEX code upstream, so nothing in this merge touches the feature. All 21 overlapping
files auto-resolved; verified every upstream addition is present in the merged tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Closes review comment 1.
imex_parallel_mode and imex_head_filament_map were streamed raw into XML attribute
values, while every other free-text attribute in the same writer goes through
xml_escape. Mode names are free text, so "PLA & ABS", a quote or a "<" made the
document malformed. The failure is not a bad value on reload: both load paths for
model_settings.config return false on an expat error, and m_is_bbl_3mf is set
before the second entry loop runs, so the whole project fails to open with
"Archive does not contain a valid model config".
Both attributes now use xml_escape_double_quotes_attribute_value(), which also
emits tab, CR and LF as numeric character references. That matters and plain
xml_escape would not do: XML normalises literal whitespace in attribute values on
read, so a tab in a mode name would come back as a space and silently rename the
mode. The read side needs no change -- it takes expat's already-decoded value with
no second unescape -- so this is a lossless round trip and a file written by the
new code still loads in an older build.
The round-trip test used "copy_mode", which exercised none of this; it now carries
&, <, a quote and a tab, and also pins that ' and > come back unmodified, since
both are legal raw inside a double-quoted value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Format/3mf.cpp also saved and loaded it, but nothing calls its store_3mf and
its load_3mf only sees files fingerprinted as PrusaSlicer's, which never carry
a recipe. Its round-trip test only exercised that dead loop. The BBS backend,
which every save and load goes through, is untouched.
The recipe's 3MF entry moved from Metadata/SnapOrca_cad.bin to
Metadata/orca_cad.bin, so projects saved by earlier builds opened with an
empty Design tab. Both 3MF backends now read either name and write only the
new one; the recipe version advances to 6 to mark the move.
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
# Description
This PR ports the color mixing feature from BambuStudio.
The port is based on the previous work by @ianalexis in #15231.
This PR completes the port and fixes various bugs.
Several improvements were also made during the porting process.
WIP
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
