Catches the fork up from 449a4cf9fc (2026-06-28) to d6cb667b89 (2026-07-24).
Upstream touched 2326 files; 17 of them overlap the 164 this branch touches.
16 of the 17 auto-merged, including all three CMakeLists.txt, the build_all.yml
CI workflow, and every GUI file. The CAD core never conflicts: CadDocument,
SketchEngine, SketchSolver, McpControl and test_caddocument are files this fork
adds, so upstream does not touch them.
The one conflict, tests/libslic3r/test_3mf.cpp, was purely additive in all three
hunks and is resolved as a union: our test pinning that store_bbs_3mf embeds the
CAD recipe as Metadata/SnapOrca_cad.bin, upstream's multi-nozzle plate-metadata
round-trip tests, and both sets of includes. All three were verified present
after resolution rather than assumed.
NOT BUILD-VERIFIED, for a reason that predates this merge and is not caused by
it: this fork cannot be configured on nativedev at all. Its CMakeLists has
required Eigen3 5.0.1 since before the merge (line 592 pre-merge), while the
only deps image on the machine is snaporca-deps, built for snaporca's
find_package(Eigen3 3.3). CMake fails at configure, so nothing compiles.
That means this fork's Catch2 suite has never run. Every "suite green" figure
recorded for M1-M8 was snaporca's suite; the ports were verified by patch-apply
plus the CAD sources being byte-identical to snaporca's. Building an orca_cad
deps image with Eigen 5.0.1 is what would finally close that gap.
Pre-merge state is preserved at branch cad-mainline-pre-upstream-2026-07-25
(30d54f0074).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
Mirror of snaporca-cad ad822bf. The earlier mirror (2c0140afb9) implemented
persistence in the PrusaSlicer 3mf.cpp, but the GUI saves/loads projects via the
BBS-native backend (store_bbs_3mf / load_bbs_3mf), so the recipe was never
written to nor read from GUI-saved projects.
- bbs_3mf.cpp: BBS_CAD_RECIPE_FILE = "Metadata/SnapOrca_cad.bin"; writer
_add_cad_recipe_file_to_archive (called after layer-height in store_bbs_3mf);
reader branch in _load_model_from_file's metadata dispatch loop (iterate +
iequals on m_filename — mz_zip_reader_locate_file does not work on these
archives).
- Plater.cpp: load_files carries the Model-level cad_recipe onto q->model().
- test_3mf.cpp: [3mf] test asserting store_bbs_3mf embeds the recipe entry
byte-for-byte (read back via miniz, Catch2 v3).
Verified on behemoth: libslic3r_tests + the new [3mf] BBS test pass; orca-slicer
GUI links clean. Round-trip verified live on snaporca-cad (identical code path).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Using bbs versioning for bbs atributes
* Orca tags
* Bump SLIC3R version to match current BBS
* New import logic
* to_string_sf
* 2.3.2 No tagged
* Update comment
* identified code for snapping to buidlplate
* rename internal name to ensure_on_bed to be consistent, saves option in 2mf, finish Move UI, use in both ensure_on_bed() functions
* makes auto_drop a per-object setting, removes global setting
* remove adUndef, add auto_drop to constructor/serialize
* fixes drop() button
* add "auto_drop" checkmark to "load as single object" dialog,
nothing changes if auto_drop == yes || "load as single object",
if auto_drop == false and "load as single object" == false the objects now retain their relative position to each other
* retains auto_drop (and printable) state when assembling or splitting objects,
adds ObjectList::printable_state_changed() overload to be able to only provide ModelObject* vector
* adds dialog when splitting to ask if auto_drop should be disabled,
only shows when auto_drop enabled and atleast one volume floating
* adds arrow indicator on bounding box if auto_drop == false
* removes unneeded code, keeps "auto_drop" naming consistent
* makes for loop simpler in set_printable, set_auto_drop and get_auto_drop,
makes get_auto_drop const,
fixes wording in Snapshot text
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
(cherry picked from commit ed9816397374116db37c2a76d11e0216df5aca1d)
* SPE-2486: Refactor function apply_mm_segmentation() to prepare support for fuzzy skin painting.
(cherry picked from commit 2c06c81159f7aadd6ac20c7a7583c8f4959a5601)
* SPE-2585: Fix empty layers when multi-material painting and modifiers are used.
(cherry picked from commit 4b3da02ec26d43bfad91897cb34779fb21419e3e)
* Update project structure to match Prusa
* SPE-2486: Add a new gizmo for fuzzy skin painting.
(cherry picked from commit 886faac74ebe6978b828f51be62d26176e2900e5)
* Fix render
* Remove duplicated painting gizmo `render_triangles` code
* SPE-2486: Extend multi-material segmentation to allow segmentation of any painted faces.
(cherry picked from commit 519f5eea8e3be0d7c2cd5d030323ff264727e3d0)
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* SPE-2486: Implement segmentation of layers based on fuzzy skin painting.
(cherry picked from commit 800b742b950438c5ed8323693074b6171300131c)
* SPE-2486: Separate fuzzy skin implementation into the separate file.
(cherry picked from commit efd95c1c66dc09fca7695fb82405056c687c2291)
* Move more fuzzy code to separate file
* Don't hide fuzzy skin option, so it can be applied to paint on fuzzy
* Fix build
* Add option group for fuzzy skin
* Update icon color
* Fix reset painting
* Update UI style
* Store fuzzy painting in bbs_3mf
* Add missing fuzzy paint code
* SPE-2486: Limit the depth of the painted fuzzy skin regions to make regions cover just external perimeters.
This reduces the possibility of artifacts that could happen during regions merging.
(cherry picked from commit fa2663f02647f80b239da4f45d92ef66f5ce048a)
* Update icons
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Make the region compatible check a separate function
* Only warn about multi-material if it's truly multi-perimeters
* Improve gizmo UI & tooltips
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Fix linux deps debug build
* Use the same DL_CACHE for release build when building debug version of deps on Linux.
This prevents downloading the same source packages twice, and avoid downloading again after deleting the build dir.
* Fix debug build
* Fix warnings "loop variable creates a copy from type" and "loop variable binds to a temporary constructed from type"
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* FIX: do not touch the plate with different printing sequence
jira: STUDIO-5424
Change-Id: I8ad00fa991b753de126a5bef0d320c452033e2e7
(cherry picked from commit c4adfe16e285f238f2c5cd8938b2167fdfb6b1b0)
* FIX: global arrange setting is wrong
global arrange setting is wrong if a plate's setting is changed from object list
jira: STUDIO-5438
Change-Id: Iaa7f35837edbacff9b97ca17a8ab34c8e6bb023d
(cherry picked from commit fa2f56575b2e4305e35dd59ff55e0881720de025)
* FIX: temperature symbols not shown correctly
Need to use wxString::FromUTF8 to convert unicode symbols to wxString.
jira: none
Change-Id: Ia8b559d437c956a2cc28916d8963823356402d05
* FIX:Repair calculation process of plate_box
Jira: STUDIO-5520
Change-Id: I4c3f9597542ad2dfec4d7849e75fa28272fa4ea3
* FIX:frequent calls to _update_imgui_select_plate_toolbar
Jira: STUDIO-5488
Change-Id: I12e6f37c2fe94de004aa6da43421970d6df10f0f
* FIX: & is not displayed on the sending print page
Jira: STUDIO-5343
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I1736bb97433581ff117bfe09afe8ee70c1b08fc4
* FIX: file name is not fully displayed if it is too long
Jira: STUDIO-5230
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I992fa0c0575afbd2eecb2af02c8a305eda028f7f
(cherry picked from commit d0d7fb0b1394429ee9d28d8ef4060a286ba0112d)
* FIX: The warning box still exits when the temperature has reset.
Jira: STUDIO-5562
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I7532db69880449eb3fa0a14fc4dfc61e7f6d518e
(cherry picked from commit 589ed5fe045b5e7ec3effe437c9685085960c0fc)
* FIX: White circle is not clear on auto refill page
Jira: STUDIO-3262
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I05ac6257638063d32a9943c09bb7c14cc9229b3a
* FIX: Groove text ctrl is not wide engough
Jira: STUDIO-5434
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I93c0995473a72b5c19bc413c38c090906e360455
(cherry picked from commit e4a8b0ef5e62ba0053dc782c30ea79b237a46ac3)
* FIX: values are not saved when clicking on an empty space
Jira: STUDIO-4637
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I837050029635f673b3ae671ea1ad049aaf4fdd16
* FIX: Temperature warning is not fully displayed
Jira: STUDIO-5038
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I460cbe2a5d0a092c4257b7bd5192058bf2e4707b
* NEW: display bitmap when calibrating
Jira: STUDIO-4661
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I60cf4f9769feca74699012418880e93fcfe34432
(cherry picked from commit 1213aea816694405311dc0c1061655a4c2a1d067)
* FIX: remember the flow ratio calibration type
Jira: STUDIO-5181
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Id6125d1d4ea58972ce55c2c2498259596b25111e
(cherry picked from commit 1af1038fd4824d989e992cb630cf34e00c787af7)
* FIX: File panel crash on scroll
Change-Id: I56833a376fa52c960efea5fbd60003367ba410c2
Jira: STUDIO-5337, STUDIO-5513
* FIX: auto arranging skip unprintable high items
Jira: STUDIO-5646
Change-Id: I72dc3d8c71a075bab8204f4418e869a7a34c0c8e
(cherry picked from commit 0afdf8361493485da2254c426719594fd9a982ed)
* FIX: MediaFilePanel error state
Change-Id: I318ef59fb97478ffee16dff594022b2b9029964a
Jira: STUDIO-5638
* FIX: sync whole preset vendor directory
Change-Id: I191dbe979a87ff35d38cab1149b7975664344838
Jira: STUDIO-5534
* ENH: support turn off liveview auto retry
Change-Id: I24b39f74e0a40a13277d6eae3830c95c5c9de333
Jira: none
(cherry picked from commit f6ceb3fb8e4df3f876c50a1c4ba96b4a1be60190)
* FIX: SwitchButton auto scale font
Change-Id: If4004c0963cc8bb2f41e8e71c304d5239bf252ab
Jira: STUDIO-4969 STUDIO-4921
* FIX: set WEBKIT_DISABLE_COMPOSITING_MODE=1 for linux gtk
Change-Id: I8a500585ca815948bab1210578ba5c45858ed78e
Jira: STUDIO-5199
* FIX: Prefer old selection when sync AMS not compatible
Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a
Jira: STUDIO-5416
* ENH: show liveview stat
Change-Id: I70d1f458aa2ed379ad7fe07dee76fbe035316420
Jira: none
* NEW:remember custom color
Jira: STUDIO-5635
Change-Id: I439080f6a8ddb6fde3899cffbabc3b6e66afbd96
* FIX: copy live555 dll
Change-Id: Idf727b8e26107e93aa9934299e87dc71531d1c63
Jira: STUDIO-4480
* FIX: optimize batch update object list on macOS
Change-Id: I92e24cc53c0b3bf0658d15abc64292f0e17c0a82
Jira: STUDIO-5440 STUDIO-5515
* FIX: network plugins tip disappear on dark mode
Change-Id: I422ab63f71158a49920438f01dd9c39774c27744
Jira: STUDIO-4891
* FIX: Display inconsistence in parameter table
JIra: STUDIO-3716
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I986473bcbb3efff4abd9c5917926d9e888a4f28c
* FIX: Incomplete copy display in Transfer or discard dialog
Jira: 5569 5549
Change-Id: I757b636259d7e1a222b9fc09276c12235360fd57
* FIX: Limit the max length of k when calibrating
Jira: STUDIO-4291
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ie7cff086cf2a3c744213525d5d83f9ac4b55333d
* fix build break
* FIX: delete sdcard file crash
Change-Id: I814fd4b557fa92ac4060cbeb18a53f5616e49662
Jira: STUDIO-5977
* FIX: Yield when join media thread
Change-Id: I746d7df88a0de8363da7d9507cb63c9e0ffe970a
Jira: STUDIO-5952
* FIX: Guide page can't show in screen with mainframe
Jira: STUDIO-4911
Change-Id: I7e89614e0f1585263456c847a1b38dcfd0ad59e6
* FIX: filament combox has blank line
Change-Id: Ia39ddb564b3c9cc943d0ea4c0cf7cc4d24bef799
* FIX: load 3mf crash when studio has no base filament
Jira: none
Change-Id: I4387f425f60e6a53a53cf68addb1ab2d6f8f8901
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX:add resume button
JIRA:github:2860
Change-Id: I39035d929876ab3c84c5f5c3494376967300938c
* FIX: CLI: fix an arrange issue when duplicate failed
restore the wipe_tower position to original when duplicate fail
JIRA: MAK-2638
Change-Id: I355056f1d87648cc1f6aafa15a98ff569359b44f
* FIX: fix printer list without nozzle such as 0.35 or 0.75
Jira: 5409
Change-Id: I1a258fd10bcc03e297b791256880f2518d602905
* ENH:The first object should locate at plate center
Jira: STUDIO-6023
Change-Id: If4284136fe63ca576463445f3ab16b6e18ead30f
* FIX: Colored filament is not matched against.
github: #2190
Colored filament is not matched against the same color in AMS slot.
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Id4588fc9c8115a46881e2f5d198d79fe831f4371
* FIX: Revert "[STUDIO-4284] not set max height of liveview window"
This reverts commit 0312aee4d9b92e23884be8802da9801ff3b9fe93.
Reason for revert: STUDIO-5653
Jira: STUDIO-5653
Change-Id: If9d5f3e63968a0a54f9af1a2dae8f95f7f1f3f80
* ENH:modify file name rules when export stl
Jira: STUDIO-6091
Change-Id: Ic27e4e341cc09099e98a5eab7dfd48416f2922ae
* FIX: Flow calibration stage incorrect when switching printers
Jira: 6093
Change-Id: I41f1ac10ac9422ac808eab3254f32ea14a0d3b76
* FIX: UserGuide Can not Click When Computer User name has chinese
JIRA: None
Change-Id: If50baa8c6a13eb501918fd5cdaf0ea3da7c788ef
(cherry picked from commit 4e5ccc9f2de5ac429af6541c6a8bd412848801d0)
* ENH: Little Optimize JS Code Execute Progress
JIRA: STUDIO-5792
Change-Id: I12b03d8b968a9dd8dfce9eb3ef925fa8768e2046
(cherry picked from commit 2bf861092c9e306e1311eda8ac36fd981e73b6c2)
* FIX: Delete Test Code
JIRA: NONE
Change-Id: I838a348edb22e09d2b1d5c41600c6fade535d184
(cherry picked from commit 51e664da0209ae8a3de5cbf30a72505c0b5bd028)
* FIX: the object list order changed after clone
github: 2798
Change-Id: I10a05ee7e00b05cb1255cfb708876ed784cabac7
* ENH: add alias for custom Filament preset
Jira: XXXX
Change-Id: I2fecc8b2bdb63618155e3d21f9db374a6119e416
* FIX: [5779] fix show alias logic when load preset
Jira: 5779
Change-Id: I4fefe3c1ffbca9bd8296f1b3fdd5de48c6a36a28
* ENH: Optimize the logic for deleting third-party printers
Mark the Filament and Process presets to be deleted first
then delete the child presets first and then the parent presets.
Jira: none
Change-Id: I100b873baae96c6ba27af258e708e6ab8e6ee4ab
* ENH:default selection of virtual tray
jira:[for def selected]
Change-Id: I0661f179f8e4bcac33ae12fbbeaeaf95c5b7c110
* ENH:add protection when no thumbnail data
jira:[for protection]
Change-Id: I3834a5ffde11ff54567dd854271184f06f94547f
* FIX:fixed issue with chinese path
jira:[Fixed the issue of failed loading of configuration files under Chinese path]
Change-Id: I9badd8fc158fcf49f46411ac4e5f72d58823eeb2
* NEW:add new msg notification for hms
jira:[STUDIO-6154]
Change-Id: If1aa33030a99550d0c859d594a2711aea4dcea4a
* NEW:using new humidity display ui
jira:[STUDIO-5967]
Change-Id: I13be4212e6b97f646d21e0af64cbc5006753fdeb
* NEW:Dye materials above grade 10 with shortcut keys
JIRA:STUDIO-5827
Change-Id: I002ecdd19167fb36772e4b4e9e2f7760e21079db
* NEW:update automatically when inserting materials
JIRA: STUDIO-6157
Change-Id: I2cefbb7b330ca4f13e841066548992b3fb3740f1
* FIX: check sdcard exists for file connect
Change-Id: I69199a29294c04d1fe46ee66682085b1f1d1d049
Jira: none
* FIX: not load printer files when it's busy
Change-Id: Ie5a58befcfc0d7fa0d4e587e8429c0b1bfeff72a
Jira: STUDIO-6105
* ENH: save video ctrl size to reduce layout change
Change-Id: I470f29d7f029d304c9badeeb8f94bed281080b29
Jira: STUDIO-6141
* ENH: stop liveview track record
Change-Id: Id4f236b239740bd919f2aa2f2892c1e63ce233bd
Jira: STUDIO-6131
* FIX: thread safe of http extra headers
Change-Id: I6ffa424be7ccb6abd78a66cc8be535f038b05469
Jira: none
* optimize MeshBoolean
* FIX: parse printer_model_id from 3mf
Change-Id: Ib149c986885ee6412898f1f51dd5a4aaad0a596d
Jira: none
* ENH: find grid empty cells for fill bed if the item is too small
jira: STUDIO-6015
Change-Id: I4e5eafdadd77482a27a8903d32bb83325283088d
(cherry picked from commit 8df4da4a863cdc42c790a9d5da37f8633423e406)
* ENH: always return product for firmware and lifycycle
JIRA: STUDIO-6282
Change-Id: I1f942babdcb7afee2c9a9076ac539063c5406ad7
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH:STL tracking restricted area
jira:[STUDIO-6155]
Change-Id: I289c8b8aa8f62f0e5cc7004fb60437aa3337ca85
* NEW:add nozzle settings
jira:[STUDIO-6226]
Change-Id: I0db8333e5b5c8195add111fdcfa2e92387997815
* ENH:display the current humidity of AMS
jira:[ENH]
Change-Id: I98bdd6d70cd173ed640f0d96692fcb6836416bb8
* FIX: [6123] create printer for exist printer can not into next page
Jira: 6123
Change-Id: I338ac0fde4f69b6f312f20e53851d91339e8156f
* ENH: Display value of flushing volumes
JIRA:STUDIO-6139
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I273fb22b0d378a839c34e9e0e9c414f0e5134799
* FIX: show printer file path & title
Change-Id: Ie5eff188c3039deeca5da96b54407194bf8910a0
Jira: STUDIO-6268
* FIX: liveview error message
Change-Id: Ie437e07916d7b6feae2dbcfa166c4e73bdcf31a1
Jira: STUDIO-6107
* FIX: file proto error message
Change-Id: I2c4117961c615e424780fb3830441e6a93c50bcc
Jira: none
* ENH: earse sensitive fields when export configs
Jira: None
Change-Id: Id9ca0637240b80773f39d2308192f8c78a5de3c6
* fix build errors
* FIX: unexpected layers in multi color print
github: 3131
Change-Id: I2a42e3bbd2247fbc0957022e1baae43c9375a8fb
* ENH: Add "New" button for PA cali
Jira: XXXX
Change-Id: Ic39f2508f2f9d390c2b9246fb3d3e281cde9b064
* NEW:add printer compatible check from sd card view
jira:[STUDIO-5969]
Change-Id: I86d10ebe2e9bc77e6350e26aeed6b4f0f9fdcecb
* NEW:enable loadl/unload when printing pause
jira:[STUDIO-5968]
Change-Id: Ieb3ef2423378e44b81a61a2b18c16f68aa335922
* FIX:fixed HMS message not cleared
jira:[STUDIO-6296]
Change-Id: Ic7692ce337fd00ece4ab8d65214a8c406f8543f8
* ENH:error code setting default value
jira:[for error code]
Change-Id: Ica61344c8217d41adb2947a40f633dc8d19a197a
* ENH:display conflict information
jira:[STUDIO-6297]
Change-Id: Ie1501323a7e8d9ceb4060ae6c0b4eab20f8b088a
* ENH: refresh printer file list
Change-Id: Ic86942d2b0b2e8383ef0f06311164aad59e837ad
Github: 3383
* FIX: Unnecessary prime tower error prompts
Custom gcode on other plate causes unnecessary prime tower error prompts
Jira: 6305
Change-Id: If499659b364a6b6898db1587b7b2aeed03758667
* FIX:multi colour displayed as gradient color on AMS
JIRA:5925
Change-Id: Ic7a925dda2e3bde066ba40ba27002569040f9518
* NEW:Color painting shortcut keys 10~16
JIRA:STUDIO-6238
Change-Id: I3cce838fad5e73d41f109b32f2e563716fd5b0da
* ENH: Print when unnamed project, task named as object names
github: #2286
Change-Id: I9be3fd25d16a00b78326ec43db9afcf3645d90f1
* ENH:reset user access code
jira:[for lan mode]
Change-Id: I2d0ed48411d683c3f20b2febc0d54747287870a7
* FIX:fixed crash when selecting new printer
jira:[fix]
Change-Id: I6a81186e822eb6bf6ce7aa70561dfae35d4de0e7
* FIX: not show printer's camera error when updating
Jira: STUDIO-6232
Change-Id: I985d75b3772849e07100799c4f13db5d4cbafde3
* FIX: clear error after reload file list ok
Change-Id: I5d5e4f2870302b198d3a9d40603a6fa8010b7e76
Jira: STUDIO-6306
* ENH: custom filament sync with printer
1. prompt sync user presets when create custom filament
2. Fix the issue of not displaying printers when creating custom Filaments based on presets when selecting PLA Aero Type.
3. Optimizing the traversal logic during AMS Setting Pop up reduces time complexity and allows for quick pop ups. Additionally, using nozzle calibers for retrieval and repairing custom materials may result in inaccurate retrieval.
4. Implement synchronization logic with the printer
-a. Received slot information, reset the slot when the "filament_id" in the information does not exist in Studio
-b. Received slot information, the nozzle temperature in the information is different from the preset nozzle temperature in Studio, reset the current temperature.
Jira: none
Change-Id: I511dc82563ec77a341839671d398607048ce1985
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* NEW: add api of "toggle_selected_volume_visibility"
Jira: STUDIO-6166
Change-Id: I77eb988a3ea43cd37d50888d1753b973795d8b36
* FIX: No data in the drop-down menu of the AMS settings page
Jira: 6342 6343
Change-Id: I6938fb4a7ae2816a4675d8d739622e25f219f469
* fix build error
* FIX: label wrap all & ping test for liveview
Change-Id: I7767ed0740e20bb578b6ef9f5e9873c8c79d172a
Jira: STUDIO-5821
* ENH: reuse controls in param Field
Change-Id: I42bb4da01e1e9b64c343b7fda4357a9553cf8684
Jira: STUDIO-5983
* FIX: use wide path to create camera process
Change-Id: I5de31fce0dea14df9a0ad363f3cb16dc40c275bc
Jira: STUDIO-4946
* ENH: optimize the get_tool_order func
Use Dp to refine performance
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I38b0c875e4deee9d9fbe926087fb5b2e274f8f90
(cherry picked from commit 9b7b66dc7a1f5e3efa318227ae7694bec5ec1216)
* Fix build errors
* ENH: add customize other layers print sequence
Jira: 6338
Change-Id: Ic14b2671ade37ab37583b81c5b509447b6c0d8f8
* ENH: [#3236] Unsaved changes to interface copy adjustment
github: #3236
Change-Id: I53931859bdcdfedfa9f63f6239d0fd2fd6d2766c
* NEW: support to adjust other layers print sequence
Jira: 6338
Change-Id: I5e6aef71aa9e6e97c1859aaaeb9ada5f1340414a
* FIX: imgui support toolbar window text wrapping issue
jira: STUDIO-5821
Change-Id: I57ee984baffbb2f00a7ecc5d5c8061074b06aff6
* FIX: updater: fix force upgrade logic
JIRA: STUDIO-6393
Change-Id: I46c51e09e7390e5ab0de40215911aac9635ab476
(cherry picked from commit 673ba6ff4ebda039d71dcbfdaa28c1252f5b8821)
* FIX:final step of slicing is to execute post-processing script
JIRA: STUDIO-5828
Change-Id: I8c33e2a66ac5c692244c778586040663b7b54bd7
* NEW:enable 3dMouse detect in .conf
JIRA: 5830
Change-Id: I8731e0244d2f551130c84bcfbbb46967ae6b19cd
* FIX:finish init "return" icon and hide it
Jira: STUDIO-6350
Change-Id: I0f1efd4a64ea204daeac7de822602ef6dfa3e4a5
* FIX: seq_print: fix an invalid warning caused by sinking
github: https://github.com/bambulab/BambuStudio/issues/3007
Change-Id: I1111910f2c625d5a871ea01b37dbfa7b04a849ee
(cherry picked from commit a3db95bb0940d5afe07ef0bb07113cc2acd7cd0a)
* ENH: plater: optimize the loading time of 3mf with large objects
JIRA: STUDIO-6021
Change-Id: Ia97f681041bb553c5c4b5b1d9109e5e5c42daf6b
* FIX:Fixed HMS issue
jira:[STUDIO-6344 STUDIO-6310 STUDIO-6356 STUDIO-6348]
Change-Id: I9d6660e7c349775004b69bfe41b651bfa8b359b7
* ENH:handling dirty data after nozzle settings
jira:[STUDIO-6332]
Change-Id: I00d6d1324376f973ec3cf9f2154ae83ef3302705
* ENH: use Bambu_StartStreamEx for agora tunnel
Change-Id: I5c28dea49d267bf7ff967d0982dd83555899c8c4
Jira: none
* FIX: use safe language code for http
Change-Id: Id1f4927308350ee35b891a5352cbf1e2d0c2577e
Github: 3655
* FIX: add cli_id, cli_ver to bambu url
Change-Id: Ic527d1497c6dee0c723d7b4629f0be825a8f7545
Jira: none
* FIX: not throw when _add_auxiliary_dir_to_archive
Change-Id: Idf54bbbd0ef557ec5e1a8e51ed669a1eb1fb4261
Jira: STUDIO-6339
* NEW: vase mode can be applied to one plate
jira: STUDIO-5838
Change-Id: Ifb315f7d79b570aeb7ee31d3495b4d465e3af0c6
* fix crashes
* ENH: update overhang degree method on calssic mode
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I90f6e4c2ef618fdaef00bdaf1ca309893f484c1e
* FIX: auto-arranging unprintable items may crash
github: #3676
Change-Id: I68eb87c73ad2c0c269f60e661136fd1a72ee5e2f
(cherry picked from commit 7e3c57eaa811424935fe8db6a4e77dd142ee2b58)
* FIX: use old slicer_uuid for client_id
Change-Id: I6c45e83213d613fc28eef04115f9cfb19dea703e
Jira: none
* ci: update network module based on commit 542ced8
Change-Id: I3ad5032cc56a99d1c3a687b2891d147b13af066d
* NEW:Support OLTP file
Jira: STUDIO-6421
Change-Id: I58bc94e978e6d2dd136ea370fb01f6ec80e14b23
* ENH: detect in_head_wrap_zone more precisly
1.Union first layer convex hull with object's bbox to detect whether
model enter head_wrap_detect_zone
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I11f26967d7421f41e9c824e62794c96591e6ae71
* FIX: fix the plate cannot be searched
JIRA: STUDIO-6283
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I88206c91ea24c6a41a0bd06f05f0f3c2fdc58a36
* NEW:hms error code
JIRA: STUDIO-6302
Change-Id: Ia33511f4c636c8ada39ed5a4e52d9b185da9c00b
* FIX:Color adaptation for numpad
JIRA:STUDIO-6410
Change-Id: If6e49638af8616fd349367073883592e6bebb503
* FIX: error overhang degree mapping
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ifa24aa0cad0a06b09ee62a8be8781188a765d1d0
* FIX:display correct humidity
jira:[fix]
Change-Id: I27aae54a8355911b5d88ed45be320d3c9178081c
* ENH:Hide confirmation button when unable to send print
jira:[STUDIO-6355, STUDIO-6332]
Change-Id: I8f9c0edea4d5ee70e9fef1e9d42838d598dc32c4
* NEW: new type for Custom Filament
Type: "PE", "PP", "EVA", "PHA", "BVOH", "PE-CF", "PP-CF", "PP-GF"
Github: 3205 3169 3127
Change-Id: I8a30dd806c35460d9dae0f808190ce013b125d51
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX:fixed filament settings page display error in French
jira:[STUDIO-5821]
Change-Id: I6cc6dd9b83c7570688c2adc55efe2407cbcb4390
* FIX:fixed thumbnail not updating when using multiple plates
jira:[STUDIO-6313]
Change-Id: If49daa5b38b9a580ae226ff00a1e0085d167c15c
* FIX: Color Bleed in slicer
github: 3681 jira: 6450
Change-Id: Icb6274f7ddb238c238c133b95167310b1af905f7
* ci: update network module based on commit 8befd46
Change-Id: I3a6420684f106bdde5897a50d27dfec69e0aa37f
* ci: update network module based on commit e411785
Change-Id: I3a9c7bfa5ac5a942f339ad0194a24d9170847371
* FIX:reload paint after background process apply
Jira: STUDIO-6493
Change-Id: I9a1986152f05163f236f58bb24210b690ca3d562
* FIX: use object name of plate when send task in untitled project
Jira: 6430
Change-Id: I78ec811fab1cf028c0d5f81ac7738abdbeb6145f
* FIX: auto arranging spacing can't be adjusted correctly
jira: none
Change-Id: Ibddfe85aab9f3fad6a1612e8db437e52c40e20a3
(cherry picked from commit 136bca01f45e62042bd699a9a0a9f6d13519712c)
* FIX: fix change nozzle temp in Studio but printer not change
Jira: 6510
Change-Id: Ia0e1ac586ff41ddbabdac0845415e70774299387
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH:rename some img files
jira:[STUDIO-6512]
Change-Id: I69872533cccda37b94384bc219cc35c5dec9310b
* ENH:PEI bed is no longer unchecked by default
jira:[STUDIO-6508]
Change-Id: Ic9ca99860d46c27ca4c36a735df3f57fe71417df
* FIX:fix the load status of vtray
jira:[STUDIO-6435]
Change-Id: I8cafcc0b6caf19492aae6c153fb509f470dc7e83
* FIX: Supports automatic calibration of textured PEI
jira: 6504
Change-Id: I3234fb555b9bf0ea97e73387651874733e761ee7
* ENH:add tooltip for search item
JIRA: STUDIO-6459
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I7602a32159d21de8f37ea0208dd6a9f59b90dcce
* ENH: CLI: add version check logic
add option allow_newer_file
Change-Id: I8e8e4a45f77ebdd6dae6189841e4a9952e95ca82
* ci: update build version to 01.09.00.52
Change-Id: Id6e32b5afcf5eaabce9c0c7ab2c422e97b00e632
* NEW: switch to object panel if double click on object
jira: none
switch to object panel if double click on object,
otherwise switch to global panel if double click on background.
Change-Id: I6e54d7957aa19f1ebb1f993bc38125bbee8a1c98
(cherry picked from commit cc2e07bc9489c76a7d767acff0406c83c996504c)
* FIX:fixed loading img resource failure
jira:[for fix img load]
Change-Id: Ifb26b2ca23029abeda000322bf2ef7d2b3cda3b4
* FIX: Project Title can Click
JIRA: none
Change-Id: I614c60e76efe04875e36e3a8ef7a10acd3ef9ecf
* FIX:Prioritize selecting filament with smaller serial numbers in AMS
JIRA: 5909
Change-Id: If3030d4dd8d59af36bc1ae1801be1b89b0027a71
* NEW:material adaptation in select machine dialog
JIRA:xxxx
Change-Id: I625eac75c88cad804dd3741f750c5ea68a975421
* FIX:mac ams setting display
JIRA: STUDIO-6228\6409
Change-Id: I432a3aa96601a8e223b5949bc0ad5234c1374dca
* FIX: Image Scale Mode and Online Display
JIRA: none
Change-Id: I528f16e93b82748d86dc93e2dd3d85f317babaa7
* FIX: sequential_print_clearance_valid not working
not working correctly with short objects
jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)
* NEW: add nozzle_height to machine profile and do not detect conflict
Jira: request from 1.9
1. add nozzle_height to machine profile
2. auto arranging and sequential_print_clearance_valid don't consider objects conflicting if they are all shorter than nozzle_height and close.
3. do not detect conflict when all models are short.
Change-Id: I8d1eebb15d5bfa8c40d7491e033149e360531b89
(cherry picked from commit 6b4b52653db5f08d724a556c5c766c0bfa00f34d)
* FIX: sequential_print_clearance_valid not working
not working correctly with short objects
jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)
* FIX: [6510] set nozzle temp incorrectly when popup AMS Setting
Change-Id: I898f0b94794a3d67017b1917ce196c4019f5eb4a
* FIX: auto-calculate flushing volumes
JIRA: STUDIO-6547
FIX the first modification of consumable color after synchronizing filaments, without automatically calculating the flushing volumes
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I2bc76a29afde5241d100cc42a5161db0f9b901c4
* FIX: custom layer sequence from End to End comboBox display issue
jira: new
Change-Id: I413cd5896d7e921f2c7c03b91b08788fefb9a4f3
* FIX:fix the v tray's filament unload logic
jira:[STUDIO-6627]
Change-Id: I34420bc4d1d27b6b36defb9852bba2eaf77fdcf2
* NEW:reducing purge through retracting filament
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
* FIX: wrong role cache in wipe tower
1. Add wipe tower role cache in GCodeProcessor result
2. Add wiki link for prime tower
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia766c7218df68fb1ffba567af193d6bfecacf588
* Fix plate settng icon
* NEW:revert hms error code
Change-Id: Ib5cc8bb8b8ced0f70d5bbe4751a1f97258218c6f
* FIX: calibration page button broken display issue
jira: STUDIO-3913
Change-Id: I2fd488e829d898b7d81d09db814ed6518f0c54a8
* FIX: do not check spiral vase mode config if an object is loaded
jira: STUDIO-6514
Change-Id: Ib44ec8322ff178b5765f7fe94b588aa38339691d
* FIX: implicitly set spiral vase config for objects just loading
jira: 6514
Change-Id: I04bb2b1abeb62d4dfff4e526b723b1cf1bd5fd7f
* FIX: filling bed fails if the bed is already full
JIRA: STUDIO-6490
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I71b5a01a95cdffef7c0750e6347fa8911dcd781d
* ci: update network module based on commit 868f5d7
Change-Id: I5584e4441e1f2ab400addaa87ee8013927fb9e15
* FIX: add query_real_volume_idx_from_other_view api
Jira: STUDIO-6545
Change-Id: Ib8216981c5d2945a0221a5caa1fbc14ed74e930b
* FIX: Can't edit text
github: 3750
Change-Id: I1caecaa968e60cadcdbe9f7aa67cba141bb88230
* FIX: Slicer creates invalid color pattern
github: 3749
Change-Id: I3fd74a9ca59b75873fcbca4437e4858c749ee853
* ENH: hide tuck did
Change-Id: I9021d3f51c9a73bc9208b479f96b1ddbe7a2f8f8
Jira: none
* FIX: PrinterFileSystem: retry connect on user action
Change-Id: I3e8902298385ed2e5906fd15d1817b6e33522a76
Jira: STUDIO-6354
* FIX: Remove user ID and other information
Jira: XXXX
Change-Id: Ia63ec88a335d88fd40a29952abe6d40d8991efee
* ENH: refine retraction before cut
1. Add filament retraction before cut control
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifcb087c9791c0461b793ef811b21ebd4c007d880
* FIX: enable resumed read only Field
Change-Id: Id09e671932458699c020f0a061d8cfc11a6958ab
Jira: STUDIO-6641
* ENH: add precise_z_height
jira: none
Change-Id: Idb9fcf0063e773f1531a49961478460b91ded10f
* ENH: modify the multi-material segmentation and voronoi
This patch is cherry pick from Prusa, thanks to Prusa
Rework multi-material segmentation to work directly on the Voronoi diagram without creating a copy of it.
Previous algorithms assume that they can get an invalid Voronoi diagram. Because of that, during the multi-material segmentation, a copy of the Voronoi diagram was created, and there were several attempts to fix missing vertices and edges. But as it shows, this wasn't a good enough approach and sometimes led to several issues like bleeding layers.
After generalization, our approach for detection and repairs of invalid Voronoi diagrams from Arachne, we could assume that multi-material segmentation gets non-invalid Voronoi diagrams.
With this assumption, we reimplement multi-materials segmentation to work directly on the Voronoi diagram. That should make multi-material segmentation more stable.
So, this should fix several issues like bleeding layers. Also, memory consumption should decrease by a lot. Also, there should be some speedup of multi-materials segmentation.
Jira: none
Change-Id: I72aa6e1f9634d9ee8759aa469a0b39a36ace62f5
* FIX: infill speed not work on region level
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie3d17c5e3cbf91a8854e3b4cd80babeb2b1bd121
* ENH: support saving PA calibration results for P series
Jira: none
Change-Id: I9402b8bcce7b48a63d0e97e0708080701d065e7a
* ENH: refine long retraction ui
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
* FIX:height range cut = volume_count * 2
Jira: none
Change-Id: I539c2f9cda7985b4b3c318ca8aa1eb7c52fdce82
* FIX: auto arranging gets wrong object height
obj->bounding_box().size() is not the real object size if the object has been rotated.
jira: STUDIO-5999
Change-Id: I6553d4c990696efd674e3e57063802127d5d5282
(cherry picked from commit 479ea9fb02f55d24f27c94633f3d852bd5c62c83)
* ENH: seperate support weight from model
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I86bb34941269bf1aa29436a94ebbdff675497e85
* ENH: add support for gcodeviewer statistics
jira: new
Change-Id: Ied6d61e8c48ac82daf16579d9caed9723cf8e29d
* FIX: invalid support weight per extruder
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0e4b857c9c758ab7c54ef13aee1bf596f975640b
* FIX: do not need reset bed_type for pa calibration
jira: none
Change-Id: I411064cf14d94a9bd1f0f6668ee23aa10d372f3d
* FIX: P1P/S can not modify the k value in old version
jira: 6745
Change-Id: I5c9dffe8e998213e6af6e1d01a6b0ae82521e8db
* Add rotation support for 3D Honeycomb
Ported from BS
* ENH: add default params for long retraction
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
* misc fixes
* ENH: remove long retraction warning
jira:NEW
Signed-off-by: tao wang <tao.wang@bambulab.com>
Change-Id: If60236b3282991a2d94df7d125427cff86899536
* avoid zero length path
* FIX: check recommended nozzle temperature
Jira: XXXX
Change-Id: I4dbb274cf27ef9c6d20a8479b29af1069652b2bc
* FIX: fix not popping up a prompt when the temperature is set to 0
Jira: 6497
Change-Id: I6498fc6962e7da376d4c652dab0a99a161932eef
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: When creating a custom Filament, use the system Filament type.
Jira: 6301
Change-Id: I1bfddcf43d2ebaebca4eb494d1f64165c3d59e9e
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: seam and unretarct pos error on smooth vase
casused by invalid path of smooth vase mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib597e8c05760886aae2c42e42e8d46e82b844578
* FIX: unable to map if filament not used in model
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
* NEW:Update data only on device pages
jira:[STUDIO-6776]
Change-Id: I33b0c9f35c1dc6df2db3b6bd4f446f46b31ecf6c
* set(SLIC3R_VERSION "01.09.00.70")
* update BBL machine profile 01.09.00.04
* scarf clip start and end
Ported from BambuStudio
* fix linux build error
---------
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: wenjie.guo <wenjie.guo@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: zorro.zhang <zorro.zhang@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: Leon Fisher-Skipper <47602359+LeonFisherSkipper@users.noreply.github.com>
Co-authored-by: Lukas Matena <lukasmatena@seznam.cz>
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com>
