A filament_id is now exactly what the preset's own filament_vendor,
filament_type and filament name mint, wherever it inherits from. Inheriting
settings no longer limits what a preset may claim, so the checks that policed
inheritance are gone, and so are the four grandfather lists that held thousands
of presets as permanent exceptions. The snapshot records sanctioned state rather
than excuses: one entry per id, carrying the product it names beside the presets
claiming it.
Profiles that disagreed are corrected instead of excused. The Elegoo TPU and
PAHT roots were named for a different product than all of their variants and
become TPU 95A and PAHT-CF; Elegoo PET-CF gains the filament_type its variants
already set; the Snapmaker breakaway support presets get an id of their own
rather than riding the PVA chain; and a BBL preset name carrying a doubled space
is fixed behind renamed_from. Their ids re-mint from the corrected identities.
The tooling and the design note also drop the word "family", which invited
reading a brand's Lite and Pro spools as one id.
No change to slicing output — only filament_id values, three preset names, the
inherits lines following those renames and the vendor indexes move.
All 264 QD_* declarations re-derive from their family triples via
--remint Qidi. Only 8 family ids are new: most QIDI-brand products already
carried v3.2-minted ids on older printer series, so the QD-series
declarations converge onto them (QD_0..4_1_1 -> OFKIQO2W "QIDI PLA
Rapido"), and the six Generic families converge onto the shared generic
ids (Generic PLA -> OFDSrzZ8 etc.) by triple math -- no inherits or
compatible_printers changes anywhere.
--update-snapshot retires all 204 QD_* ids with mode-rule successors.
Audit: 204/204 non-null successors, every chain ends at a live id; the
four ids hardcoded in QidiPrinterAgent's non-numeric-series fallback
resolve to the OFL generics (QD_1_0_1 -> OFDSrzZ8, ...). The v4.1 agent
hook translates device-composed QD_* ids through these entries at
runtime, so box behavior is preserved on updated clients.
Known accepted residue (plan v4 SS4): three case/spelling family splits
keep distinct ids for one product line each -- QIDI PC-ABS-FR (series
1-2) vs QIDI PC/ABS-FR (series 3-4) vs Qidi PC-ABS-FR (X-Plus 4), and
QIDI TPU 95A-HF vs Qidi TPU 95A-HF. Renames are ruled out; the ledger's
per-series successors keep each device slot resolving to the right
presets, and a future upstream name unification self-heals through
content addressing.
The code<->ledger lockstep test is now active (un-skipped).
Gates: --check 0; orca_extra_profile_check 0/0; 117 script tests OK
(0 skipped); validator base, -f tree-wide, -v Qidi all exit 0;
libslic3r_tests green; Qidi profile diff is filament_id-value-only.
Qidi.json version bumped.
Brings in 560 commits (merge base 2026-07-04 .. origin/main af9fd10d7a).
19 conflicts resolved; the other 138 touched files auto-merged.
Conflict resolutions
- Snapmaker/Polymaker (7): main normalised JSON key order in #15039 while this
branch inserted filament_id/filament_vendor. Took main's key order and kept
this branch's values, inserting a single filament_id key rather than letting
git's line merge leave duplicate "from"/"instantiation" keys.
- re3D rPETG @0.8/@1.75 nozzle (2): main renamed these from "re3D Greengate
rPETG @*" and re-vendored GreenGate3D -> re3D (#15169). Git's rename-aware
merge produced a file with two filament_vendor keys; took main's version
wholesale instead. The id is reconciled by the tooling, not by hand.
- re3D rPP (1): kept main's inherits change (fdm_filament_pet -> fdm_filament_pp,
local filament_type override dropped) and its widened compatible_printers.
The flattened type is still PP, so the product triple and id OFfHGM1D are
unchanged.
- re3D Greengate rPETG.json, Afinia {ABS+,ABS,PLA,TPU,Value ABS,Value PLA}.json
(7 modify/delete): accepted main's deletions. The Afinia ids are not orphaned
- the surviving @HS presets resolve the same triple and already carry the
same ids, so nothing is retired.
- .github/workflows/check_profiles.yml: kept both main's new "validate slice"
step and this branch's tree-wide filament-subtype check.
- tests/libslic3r/CMakeLists.txt: kept both test_filament_id_succession.cpp and
main's test_preset_diff.cpp.
Verified
- No conflict markers; all 12795 profile JSONs parse with no duplicate keys.
- All branch artifacts (tooling, snapshot, ledger, doc, tests) intact and
unmodified by the merge.
- The succession-ledger C++ call sites survived main's refactors; audited
Preset.{cpp,hpp}, PresetBundle.cpp, DeviceManager.cpp, PresetComboBoxes.cpp,
CaliHistoryDialog.cpp, MoonrakerPrinterAgent.cpp against base/ours/theirs.
- scripts/tests: 115/116 pass.
Known follow-up: assign_filament_ids.py --check reports 243 errors, all from
filament data main added in the last month (BBL/addnorth, Qidi X5/Plus 5,
Snapmaker U1, re3D). The single failing unit test is the live-tree conformance
test asserting that count is zero. Reconciliation lands separately.
* re:3D profile updates.
- Replace vendor-specific "re3D Greengate rPETG" filament with a generic "re3D rPETG" (base + @0.8/@1.75 nozzle variants), matching the naming convention used for rPLA/rPETG elsewhere in the re:3D vendor
pack.
- Add fdm_filament_pp as a proper filament-type parent and switch re3D rPP to inherit from it instead of overriding filament_type on top of fdm_filament_pet.
- Added filament_type to the specific printer JSON file and removed from the base printer JSON file [fixes Issue#14693]
- Updates to speeds and accelerations for re:3D profiles, moved from common to machine processes [closed: PR#14259]
- Updates to fdm profile filename format so that it lists the filename and extruder number in the sliced .gcode file
* Fix setting IDs
* Add rename from for changed material names.
* Add the Qidi Plus 5
* Remove ignored profiles
Qidi didn't register these, so they are essentially dead weight.
* Set Qidi profile version to 02.04.00.10
* Fix redundant QIDI startup tool changes
Guard Q2, X-Max 4, and X-Plus 4 filament-change G-code so same-tool startup selections do not run the full cut, unload, and purge sequence.
* Guard Q2C against redundant startup tool changes
Skip the complete filament-change sequence when the requested tool is already selected during startup.
* Bump Qidi profile version
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The eight presets added in 0545750c1b never got ids: the six iQ processes
had none, and K1 SE 0.8 / V-Core 4 0.8 carried ids copied from the presets
they were duplicated from — K1 SE 0.8 still shared K1C 0.8's id. Regenerated
with scripts/assign_vendor_setting_ids.py; none of the eight have shipped in
a release, so no existing id changes meaning.
Declare support_cooling_filter=1 on the three profiles (0.2/0.6/0.8
variants inherit from 0.4) and insert the cooling-filter conditional
into the H2D and H2S machine start g-code, inside the low-chamber-temp
airduct branch:
{if(cooling_filter_enabled)} M145.2 P0 F0 {else} M145.2 P0 F1 {endif}
H2D Pro intentionally gets no g-code edit: its duct firmware takes the
filter mode over the device channel only, so the flag merely enables
the toggle.
Impact on existing users at default settings: H2D/H2S start g-code gains
exactly one line (M145.2 P0 F1, filter off) in the cool-chamber branch;
nothing is removed or reordered. The existing support_air_filtration=1
overrides are deliberately kept so exhaust-fan behavior for ABS-class
filaments is unchanged, even though the machine-tab row is hidden while
the cooling-filter toggle is shown.
cooling_filter_enabled existed as a config option but was shown nowhere,
and there was no capability flag to gate it. The cooling filter and air
filtration are alternative accessories sharing the same duct, so a
printer declares one or the other.
- new hidden printer capability flag support_cooling_filter
- "Use cooling filter" toggle in the Accessory group, shown only when
the printer supports it; the air-filtration toggle hides in that case
(no vendor restriction: third-party printers keep air filtration)
- explicit defaults (0) in the common machine base
- H2C declares support_cooling_filter=1 instead of support_air_filtration;
its start-gcode already carries the cooling-filter conditional, so the
toggle is functional. On H2C this drops the two exhaust-fan lines that
air filtration emitted for ABS-class filaments, matching the printer's
actual duct accessory; H2C is new on this branch so no existing user
output changes.
Printers without the flag keep exactly the previous accessory UI and
g-code.
New printer option fan_direction (undefine/left/right/both, default
undefine) declares which side the auxiliary part-cooling airflow comes
from. When set and the printer has an auxiliary fan, auto-orient adds a
yaw rotation so the dominant overhang area faces the airflow, and newly
added primitive shapes are pre-oriented the same way (except the Cube,
whose axis-aligned bounding box the pressure-advance pattern calibration
depends on).
- FanDirection enum + fan_direction printer option (Accessory group,
enabled only with auxiliary_fan)
- orient engine: weighted overhang areas per candidate, yaw-direction
search, vertical rotation applied on top of the primary orientation;
the cooling weights are taken from the candidate actually chosen,
including the flat-bottom tie-break
- orient_for_cooling() for primitive placement
- set fan_direction=left on H2C/H2D/H2D Pro/X1/X1E/P1S 0.4 profiles
(X1C/H2S/P2S/X2D/Qidi X-Max 4 already carried the key, which now
takes effect)
With fan_direction unset or no auxiliary fan the vertical rotation stays
identity and auto-orient results are unchanged; slicing and g-code are
never affected.
The engine already implements prime_volume_mode (Default/Saving/Fast)
but nothing in the UI could set it, leaving prime-saving unreachable on
multi-sub-nozzle extruders and fast purge unreachable on printers that
support it.
- new PurgeModeDialog with selectable Standard/Fast or
Standard/Prime Saving cards depending on printer capability
- "Purge mode" sidebar button next to Flushing volumes; opens the
dialog and stores the choice in the project config
- printer preset-load gating: button shown only when the printer has
multiple sub-nozzles per extruder or sets support_fast_purge_mode;
stale project values the printer cannot honor reset to Default
- enable fast purge on A2L 0.4 (support_fast_purge_mode), explicit
default 0 in the common machine base
- new dialog strings added to OrcaSlicer.pot
Printers without these capabilities never show the button and their
projects keep prime_volume_mode at Default, so slicing output is
unchanged.
* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
Every remaining legacy filament_id outside the BBL/QD_* islands re-derives
from its product triple (filament_vendor / filament_type / family name),
completing the content-addressed id model of filament_id_plan_v3.md:
- Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3,
Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring
ids; the 16 presets that rode Prusa's forks now declare the id they
already resolved (verified zero effective-id drift over all 5892
instantiated presets).
- --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF
ids and ride their OFL families.
- --remint over all 62 non-island vendors: 2647 declarations re-derived;
identical products converge cross-bundle (showcase: PolyLite PLA is now
OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker).
- Prusament @XL completions surfaced by the relocation: filament_vendor
["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed
PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF
(-CF family typed as base polymer); each family converges on one id.
- Succession: 331 ids retired with mode-rule successors, 355 never-shipped
v1 mints forgotten with chain splicing, 151 GF-shaped ids released to
the island space with hints, 27 curated BBL-generic -> OFL-generic
hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance
mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's
Generic PC/PETG/PA in released versions, whose claims migrated in v3.1
while Cubicon's inert fork declarations kept them alive).
- Retiring the P-hex system ids removes the last system ids from
check_ams_filament_valid's destructive P-gate.
- AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets
riding another family's id through inherits now declare their true
family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA /
PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which
duplicate their per-printer variants on the same printers, split onto
the salt-1 iteration of their triple (sanctioned by the mint-conformance
check; --remint now leaves salt-conformant declarations alone).
Gates: assign_filament_ids --check 0; orca_extra_profile_check 0;
116 python unit tests; config-equivalence over all 5892 instantiated
presets (byte-identical configs except the 14 sanctioned Prusament
vendor/type corrections; setting_id and compatible_printers unchanged;
per-family convergence and ledger conservation verified); profile
validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610
assertions; Moonraker OFL generic map check; custom-preset fixture
archives v1.9.0-v2.4.1.
