* Fix incorrect early exit for CLI mode no-support preventing parameters from being read
* Use PartPlate's m_height to allow CLI to perform proper BuildVolume check
* Add safeguard against extruder_pintable_heights and extruder_areas vector size mismatch
* Preserve printable_height precision in PartPlate/PartPlateList
* Fixed multiple BuildVolume warning issue, and keep check_outside diff minimal
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Part 1 of 3 of the CLI-mode bug sweep, split out of #15452 per review
feedback there. This PR contains the crash fixes.
## Fixes
- **`--outputdir`/`--datadir` with a missing parent directory aborted**
via unguarded `create_directory`. Directories are now created
recursively, with a graceful early exit and a specific error message if
creation fails.
- **`--slice` + `--export-3mf` segfaulted on a from-scratch slice**:
`ConfigOptionVector::get_at()` on an empty vector is `.front()` of an
empty vector (UB). Guards added for `filament_color`/`filament_id` at
the CLI call site, and inside `DynamicPrintConfig::get_filament_type`
for `filament_type`/`filament_is_support`/`filament_id`. Only *empty*
vectors are treated as missing — the existing clamp-to-front behavior
for merely out-of-range indices is preserved, so GUI callers are
unaffected.
- **OOB heap write from stale `filament_self_index` on
`--load-filaments`** (fixes#14181): a 3MF carrying more
`filament_self_index` entries than loaded filaments wrote past the end
of `old_variant_counts`. The guard validates both bounds — entries `>
filament_count` *and* non-positive entries (`< 1`), since a single `0`
in an otherwise-valid array indexes `old_variant_counts[-1]`.
- **Wrong printable-area check** for non-rectangular beds: use the
printable area's bounding box instead of a naive vertex calculation
(fixes#15363).
- **`nozzle_height` and `align_center` were not read into the arrange
config** in CLI mode.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
- Repro'd each crash on CLI before the fix; all resolved after.
- `tests/libslic3r` suite passes; full binary builds clean on Linux.
- Added `get_filament_type` unit tests
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* Reject invalid CLI argument values instead of silently accepting them
* Add read_cli accept/reject tests
* Update Option Type for LogFile argument
* Add read_cli vector option tests
* Accept common bool spellings on the CLI, cover --logfile in tests
* Add unit tests for truthy bool parsing
Refresh detach-from-parent checkbox state
Allow the detach checkbox toggle event to propagate to the custom CheckBox control so it refreshes its bitmap after the value changes.
The sweep now validates each printer with the filament that printer ships, so a run
over every vendor reports what a single-vendor run does. Validator only - no change
to slicing output or shipped profiles.
Revolve failed on a sketch whose profile was closed. Decoding the reported 3mf: four
entities forming a proper closed loop (joints open by 4.44e-06 mm, well inside
tolerance) plus one stray 1.82 mm Line at (-24.2, 80.3), inside the shaded region,
touching nothing.
The viewport's region_loops discards open chains ON PURPOSE — it exists to find
EXTRUDABLE regions — so the user saw one clean closed region. entities_to_wires kept
the stray as its own one-edge loop, so it returned two wires, and Revolve goes through
entities_to_wire which demands exactly one. Extrude would have failed one step later in
wires_to_face, because a one-edge open wire bounds no face. Same class as the tolerance
split fixed in 8b568b7b: the viewport and the kernel disagreeing about the sketch — this
time about what BELONGS to the profile.
entities_to_wires/entities_to_wire/build_sketch_wire take closed_only. It is not a
blanket rule: a SurfaceExtrude builds a sheet FROM an open profile and a Sweep PATH is
normally open, so all ten call sites are classified individually — true for the face
fallback, Extrude-taper, Revolve, the Sweep PROFILE and Loft profiles; false for
SurfaceExtrude/Revolve/Loft/Fill and the Sweep path.
A component counts as open when some welded node has DEGREE 1. The first attempt used
"the traversal did not return to its starting node", which regressed the bridged C
profile: a closed loop that also carries a second edge across the same two nodes has no
free endpoint, but its Eulerian walk ends elsewhere. Degree-1 is the property that
actually distinguishes a stray segment from a closed profile; the suite caught the
difference.
Behaviour change decided by Tommaso: a stray is IGNORED, not refused. The test that
required refusal dates from when ignoring meant falling through to a default rectangle —
geometry nobody drew. That fallback is gone, so ignoring now builds the circle the user
actually drew. Its assertion is updated with the reason.
The bridge round-trip test extruded an ENTIRELY open chain and "worked" only because
OCCT will make a face from an open wire. It gets a genuinely closed profile: the test is
about serialization, and deserialize_recipe recomputes, so the document has to be one
that legitimately builds.
Failures now say WHERE. sketch_open_ends reports free endpoints under the same weld
tolerance the wire build uses, and open_loop_message is shared by both throws, because
Extrude fails through build_sketch_face and Revolve through build_sketch_wire — enriching
only one would have left the commoner path the less informative one.
Kernel 66115 assertions / 608 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Tommaso asked the question that names the real defect: if the sketch was open, why was
the same sketch shaded closed and offered for extrude? Because the two halves used
different tolerances. region_loops shades a region closed at 1e-3 mm; connected_loop
chained at 1e-3; the kernel welded at 1e-4 and OCCT matched vertices at 1e-7. The
2.28e-5 mm gap in the reported sketch did not cause that disagreement, it only made it
visible — and fixing the gap alone would have left the contradiction in place, ready to
reappear anywhere in (1e-4, 1e-3].
kSketchJoinTol now lives in SketchEngine.hpp and is the only place the number exists.
region_loops, loop_report, connected_loop and entities_to_wires all read it through
sketch_join_tol(). The viewport cannot promise a region the kernel refuses to build.
The welding is optional, because a kernel that silently closes loops should let you say
no: "Auto-close sketch loops" in Preferences, default ON, no restart. OFF means only
exactly coincident endpoints join — and since both halves read the same value, the
viewport simply stops shading the region closed, so an open loop is visible rather than
welded behind your back. No separate UI needed for that; it falls out of sharing one
number.
Details that matter. The kernel defaults to auto-close ON independently of the GUI, so
headless and MCP callers behave like the viewport instead of inheriting an unset
preference. With the tolerance at 0 the comparisons become <=, because OFF must mean
exact, not broken. OCCT never receives a zero vertex tolerance — it is clamped to
Precision::Confusion.
The preference is pushed from EVERY entry that starts a sketch session, not just
begin(): a Constrain session enters through begin_constrain / begin_constrain_entities
and uses region_loops and connected_loop, so a single push site would have left those
sessions running on whatever the previous one set. begin_imported_transform is excluded
deliberately — it works on imported regions, not chained entities.
Tests: a loop with one joint open by 9e-4 mm, given out of traversal order, builds a
closed four-edge wire; with auto-close off the same loop yields no wire; and an exactly
closed loop still builds with auto-close off, proving OFF means exact. Kernel 66104
assertions / 606 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
An extrude built a solid the user never drew: three sides of the handle plus the arc
that bulges outside the outline, with the bowl's second arc and the left edge missing.
Two faults met. entities_to_wires added edges in ENTITY-CREATION order, so a partial
wire rejects the next edge even when the sketch closes perfectly; and one joint of the
reported sketch is open by 2.28e-5 mm, wider than OCCT's 1e-7 vertex tolerance and
wider than this function's own EPS of 1e-6, so that edge was refused on geometry too.
Neither showed up, because BRepLib_MakeWire::Add DROPS a disconnected edge
(BRepLib_DisconnectedWire + NotDone) while every successful Add ends with
BRepLib_WireDone + Done() — overwriting the failure. `if (!wm.IsDone()) return {}`
was therefore asking only whether the LAST edge connected. Six edges in, four out,
IsDone() true.
Endpoints now weld into shared nodes at one tolerance (kSketchWeldTol) used by BOTH
the union-find grouping and the wire build — they disagreed before, which is how a
joint gets united into a loop and then refused by the builder. Each node becomes ONE
TopoDS_Vertex, so the builder matches on identity instead of proximity, with the
vertex tolerance widened because BRepLib_MakeEdge::Init projects a vertex onto the
curve within that tolerance and a welded node sits up to the weld gap off its
neighbour's curve. Members are then walked in traversal order. Finally the result is
counted: IsDone() alone is not evidence, edge_count == members.size() is.
Arc geometry is untouched — the midpoint from (start_angle+end_angle)/2 and the
solver's angle reflow both measured correct and were never part of this.
The regression case carries the reported sketch verbatim, open joint included. It
fails 4 == 6 without the fix, which was measured, not assumed. Kernel 66092
assertions / 604 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* fix: prevent heap corruption in model repair with auto-backup
The CGAL model repair (fix_model_with_cgal_gui) runs on a worker thread
that mutates the live ModelObject (split / delete_volume / set_mesh).
Those mutators transitively call save_object_mesh(), which hands the
object to the auto-backup manager. The manager clones and serializes the
object on its own thread via an internal Model documented as "visit only
in main thread". Running that path from the repair worker races the
backup thread on the shared model, causing use-after-free / heap
corruption -- EXC_BAD_ACCESS and libmalloc "corruption of free block"
aborts, always with the "cgal_fix_model" worker on the stack inside
add_object_mesh -> Model::add_object / delete_object.
Wrap the repair in a SaveObjectGaurd so the backup manager ignores the
object for the duration of the repair; a single backup is taken when the
guard is released on the main thread after the worker joins. This mirrors
existing batch-edit usage of SaveObjectGaurd (Model.hpp, GUI_ObjectList).
Repro: repair a multi-part / splittable object with auto-backup enabled
(Preferences > Backup); crashed within a few repairs on macOS arm64.
* Update FixModelByCgal.cpp
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
The rows, their ✗ buttons and the click-to-highlight were all built against
m_doc.features[m_constrain_feat].entity_constraints — a COMMITTED feature. A live sketch
has no committed feature, so the card was hidden for the whole session and the list it
would have shown was empty by construction. Every constraint applied while drawing was
nameless: the badge said one existed, nothing said which.
rebuild_constraint_list now picks its source by scope. live_constraint_scope() is the same
discriminator apply_constraint already used to route to apply_live_constraint — both
Constrain modes set m_active, so is_sketching() alone would claim the live scope while the
committed manager is open. delete_constraint and highlight_constraint_entities branch on
it too, and the card shows in Sketch mode as well as Constrain.
Keeping the rows in step needed a signal that did not exist: on_solve_state fires on every
frame of a drag, so rebuilding from it would rebuild the list continuously. The tool now
fires on_constraints_changed only when the constraint SET changes — one added by
try_add_constraints, one removed by remove_constraint (the indexed form the badge click and
the ✗ row now share).
The rebuild is deferred through CallAfter. One of its callers is the ✗ button's own click
handler, and rebuild_constraint_list destroys those buttons: deleting the window whose
handler is still on the stack is a use-after-free.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
A glyph reads as decoration until something says otherwise, so the badges shipped
last commit were discoverable only by accident. Two places now say it, chosen because
they are where the eye already is:
- the moment of applying, which is the one the user is watching ("Applied constraint ·
its badge is on the sketch — click the badge to remove it"). The hint line could not
carry this alone: it only refreshes when the (mode, step, picks) tuple changes, and
applying a constraint changes none of them.
- the Select-mode hint line, appended only while the live sketch actually holds a
constraint, so it never advertises a badge that is not on screen.
Also fixes what the previous commit got wrong: remove_constraint_near solved through
solve_sketch_entities directly, which relaxes the geometry but leaves m_dof and the
per-entity conflict flags untouched and never fires on_solve_state. Deleting a
constraint therefore left the DoF readout describing the system as it was BEFORE the
deletion, and any red over-constrained tint stranded on screen. It goes through
resolve_live() now, the same path every other live edit uses.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
The constraint badges existed and had never once been drawn where they were needed.
build_constraint_glyphs read m_constrain_cons, a vector only the COMMITTED-feature
Constrain mode fills, and the draw call sat inside `if (m_mode == Mode::Constrain)`.
Every constraint applied during a live sketch — which is the path the Constrain buttons
take while drawing, the one added in "Constrain while you sketch" — went into
m_constraints and was rendered by nothing. You could not see that Parallel had applied,
so "nothing happens" was indistinguishable from "applied and invisible".
The glyph builder now takes its constraint list as a parameter: Constrain mode passes
m_constrain_cons as before, the live session passes its own m_constraints. Same glyphs,
same teal.
Seeing them is half of it. A constraint's entire state is exists / does not exist, so the
toggle is a delete, and there was no way to reach one during a session — the ✗ rows in
the panel list are bound to the committed feature. Each badge now records where it landed
(m_glyph_hits) and a plain left click in Select mode within its cell drops that constraint
and re-solves. Shift/Ctrl clicks are left alone so multi-select still works.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
HanifKoh