* Add orca-translations Claude skill and PO tool
Add a .claude skill that guides translation passes over the localization/i18n gettext catalogs. It covers the workflow: run gettext, settle new glossary terms, translate in batches, verify, and report.
Includes translation-rules.md, which condenses the placeholder, line-break and glossary rules plus the guidance on review notes.
Also adds scripts/po_tool.py (standard library only). It lists pending entries with glossary hints, validates and applies translations, adding '# AI Translated' and '# Needs human review' comments, and rewrites only the entries it changes. It can also check catalogs, look up existing translations, suggest glossary candidates and update the wiki glossary TSV.
* Let po_tool apply translations by entry id
pending now gives each entry a short id, so a translation file can name
entries by id instead of repeating the English msgid. apply accepts either.
A "review": "" item clears an earlier review note when overwriting an
entry, and check gives each msgfmt run its own temporary output file so
parallel checks do not collide.
* Fill all empty translations
Regenerate the template with run_gettext --full and translate every empty
entry in the 22 catalogs (7,089 entries) with the orca-translations skill,
following the localization glossary, including the new belt printer,
IDEX/IQEX and plugin terms. Every new entry is marked "# AI Translated";
122 also carry "# Needs human review" with what to check.
* Show entry ids in po_tool lookup and search translations
lookup now prints each entry's id, so an entry found there can be
rewritten with apply --overwrite without repeating the English, and
--msgstr searches the translations instead of the msgids, which finds
every entry that still uses a term being changed.
SKILL.md describes how to change an established term: check the
catalog's usage first, update the glossary cell, then rewrite only the
entries where the term has that meaning.
* Fix mistranslated terms and align catalogs with the glossary
Correct labels that the glossary had copied, and the entries that used
them:
- ca: Raft was rendered as the Brim term; it is now "Rai". Exhaust fan,
Monotonic line, Unretract, Slice, Lateral Honeycomb and PA Tower
labels fixed.
- cs: Lightning infill is "Blesk", not "Osvětlení" (illumination).
- sv: Retraction is "Retraktion", not "Reduktion"; Unretract,
Lagerhöjd, Delkylningsfläkt, Utsugsfläkt, Aligned Rectilinear and the
Preset label fixed.
- de: Brim is "Rand" and Skirt is "Umrandung", as most entries already
had them.
- lt: brim entries used the Skirt word "apvadas"; they now use "kraštas".
- es: Sparse infill is "relleno de baja densidad", the catalog majority.
- eu: nozzle wipe is "garbiketa", not purge.
- th: the project plate is "เพลต", distinct from the bed.
- uk: Quarter Cubic, Latin "PA" in PA Tower, and Belt purge tower.
- pl: Cross Hatch, Tri-hexagon, Volumetric speed and Raft labels.
- zh_TW: Brim stays "Brim", as the existing labels have it.
- tr: "Prime Tower" read "Prime Minister Tower".
- ko: the plugin "Capabilities" label read "performance".
- Build Volume labels fixed in tr, de, cs and eu.
All 242 rewritten entries are marked "# AI Translated".
* Make more UI text translatable and fix pluralization and context
Audit the sources for text that translators could not translate
correctly and fix it.
Mark text that reached users in English only: IDEX/IQEX role names,
plugin permission prompts and errors, 3MF/preset loading errors, G-code
placeholder parser errors, calibration and device messages, notification
texts, file dialog filters, and the config validation messages.
Replace sentences built from translated fragments, such as the prime
tower warnings, "left"/"right" nozzle names, and "Filament " + number,
with single msgids that have placeholders, so translators can reorder
and inflect them.
Use plural forms for texts with a count ("%1% mixed filaments",
"%d objects", "%1% triangles") instead of "(s)" and mismatched verbs.
Fix the swapped singular/plural pair in "The following presets inherit
this preset".
Add translation contexts where one English word has several meanings
(Subscribed/Local, Standard, Pause, View, Step, Model, Camera, Flow,
Filter, Others, Prepare, the Design tools). Show "Size" instead of
"Build Volume" in the Cut tool, which displays the object size.
Fix code that compared translated text with English (the Edit G-code
dialog group, the plugin registration failure check), and add the
bundled web pages' missing string-table entries. Use the single
character for degrees Celsius, say "G-code", and describe the head
filament map without internal jargon.
Install the libslic3r translate callback before the presets load, so
their load errors are translated, and list the 28 source files that had
marked strings but were never extracted into localization/i18n/list.txt.
* Suggest earlier translations and list fuzzy entries in po_tool pending
pending now attaches the closest earlier translation of a similar
English text (from obsolete or translated entries), so a reworded or
split string keeps its wording, and it lists fuzzy entries by default,
since users never see them. A fuzzy entry also carries its stale
translation as previous_translation.
* Fix wording of the non-boolean operands error
The logical operation error said "operators" where it means the
operands the operation was applied to.
* Translate the newly translatable strings in all languages
Regenerate the template after the translatability changes and fill every
new or changed entry in the 22 catalogs (about 12,800 entries): the
strings that became translatable, the plural forms, the entries split by
context, and the previously fuzzy singular entries that became plurals.
Every new entry is marked "# AI Translated", and about 360 also carry a
"# Needs human review" note saying what to check. Terms follow the
localization glossary. Earlier translations of reworded strings were
reused where the meaning was unchanged. Existing entries were not
changed, and obsolete entries are kept.
* Document the source translatability audit in the orca-translations skill
Add a reference describing how strings reach translators, what to look
for (untranslated text, spliced sentences, missing plurals, ambiguous
words), what not to translate, where a context cannot be carried, and
what to do after the edits, plus a scanner that lists untranslated
user-facing string literals.
* Document how to write translatable strings in AGENTS.md
Tell developers to keep each message complete in one msgid: use
placeholders instead of concatenating translated fragments, plural forms
for counts, and contexts for ambiguous words, and to list new source
files in localization/i18n/list.txt. Add a matching code review item.
* Translate the strings added since the rebase
Regenerate the template against the current main and translate the 26
new entries per language: the Fix Model commands and messages, and the
texture displacement image adjustment panel. Each new entry is marked
"# AI Translated"; existing entries are unchanged.
* tidy
* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
* Add Missing Includes Across src/slic3r/GUI
Every GUI source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, plus one hand edit making CalibrationPanel.hpp self-contained.
* Drop the OS-Specific Includes Added Outside Their Platform Guards
GLib, GTK, D-Bus and POSIX headers are only used inside platform #if blocks, which already include them. Added unconditionally at the top of the file they broke the Windows build.
* Add the clang-tidy Configuration That Generated These Includes
Only misc-include-cleaner's missing-include check, with the headers it must never suggest: per-platform, internal and OS-specific ones that would break other platforms or are not meant to be included directly.
* Match Windows Paths in the clang-tidy Ignore List
Header paths use backslashes on Windows, so every / in a pattern is now [/\\]. The Windows SDK headers are ignored alongside the other OS-specific ones, and the list is one pattern per line. Suggested by @raistlin7447 from a Windows clang-cl run.
* fix: crash in Measure tool when a plain edge is the first selection
The SPHERE_2 gripper raycaster called get_feature_offset() on
.first.feature instead of .second.feature (copy-pasted from the SPHERE_1
block). Plain planar-border edges store no extra point, so the Edge
branch dereferenced an empty optional behind a release-stripped assert,
aborting on Flatpak and undefined behavior elsewhere.
Point the SPHERE_2 raycaster at .second.feature and fall the Edge branch
back to the edge midpoint.
Fixes#14018
* unify footer
adds "Done" Buttons,
standardize "Reset" Buttons,
adds disabled logic to "Reset" Buttons
* adds ImGuiWrapper::COL_WARNING = ColorRGB:Warning,
replaces ColorRGB::Warning
* consistently display warnings,
moves assermbly warning after footer,
make cut warnings warning color
* adds separator above cut warnings
* adds tooltip entry in move, rotate & scale for auto-drop
* use wrapper tooltip in wrapper->button for consistent text color
* restructures brim ears button,
renames "Reset" button in painting tools to "Erase All",
small styling fixes
* small adjustments,
moves "Edge detection" checkbox in painting tool underneath,
moves "Section View" in Brim ears tool after buttons,
moves warnings in Assemble tool under footer
* small brim ear tool structure changes,
adds separator between "Head Diameter" and "Max angle",
adds tooltip to "Auto-generate" button,
rewords shortcut descriptions to match other tools
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
refactors tooltipbutton,
one common implementation,
one common shortcut data structure,
add tooltip button to text gizmo,
consistent shortcut wording
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
* Add runtime display backend detection for Wayland support
Add LinuxDisplayBackend utility to detect X11 vs Wayland at runtime
using GDK_IS_X11_DISPLAY / GDK_IS_WAYLAND_DISPLAY macros. This is
the foundation for removing the forced GDK_BACKEND=x11 and enabling
native Wayland support.
- New files: LinuxDisplayBackend.hpp/.cpp with get_linux_display_backend(),
is_running_on_wayland(), and is_running_on_x11()
- Propagate wxHAVE_GDK_X11 / wxHAVE_GDK_WAYLAND from FindGTK3.cmake
as compile definitions to libslic3r_gui
- No-op on non-Linux platforms (returns Unknown / false)
* Fix Phase 1 code quality: pragma once, source ordering, static cache
* Make X11 initialization conditional for Wayland support
Remove the unconditional GDK_BACKEND=x11 force that blocked native
Wayland. Replace with conditional logic:
- EGL safety fallback: re-force X11 only when wxUSE_GLCANVAS_EGL is
off and WAYLAND_DISPLAY is set, with a warning log
- XInitThreads() only called when DISPLAY is set (X11 in use)
- __GLX_VENDOR_LIBRARY_NAME only set when DISPLAY is present (GLX-specific)
- WEBKIT_DISABLE_COMPOSITING_MODE only set under XWayland (both
DISPLAY and WAYLAND_DISPLAY present)
- Guard X11/Xlib.h include with __has_include for robustness
- Restore display validation to accept either DISPLAY or WAYLAND_DISPLAY
This is Phase 2 of the Wayland support plan.
* Fix Phase 2: safer EGL macro check, add clarifying comments
* Add GLAD2 library and replace GLEW linkage in build system
Set up GLAD2 as a static library to replace GLEW for OpenGL loading.
GLAD2 supports both GLX and EGL, which is required for Wayland support.
- Create src/glad/ with pre-generated GLAD2 sources (GL 4.6 compat)
- Add src/glad/CMakeLists.txt building glad as a static library
- Wire glad into src/CMakeLists.txt before libvgcode
- Modify libvgcode to use shared glad for GL path (keeps local copy
only for GLES2/Emscripten) to avoid duplicate symbol conflicts
- Replace GLEW::GLEW with glad in libslic3r_gui link libraries
Note: GLEW is kept in deps for OpenCSG. Code migration from GL/glew.h
to glad/gl.h headers will follow in Phase 3B+3C.
* Fix Phase 3A+3D: libvgcode GLAD include, dead files, dlopen dep, OpenGL link var
* Migrate from GLEW to GLAD: replace headers and API calls across codebase
Replace all #include <GL/glew.h> with <glad/gl.h> across 49 source files.
Migrate GLEW API calls to GLAD equivalents:
- glewInit/glewExperimental -> gladLoaderLoadGL()
- GLEW_EXT_* / GLEW_ARB_* extension checks -> GLAD_GL_EXT_* / GLAD_GL_ARB_*
- Remove GLEW-specific EGL/GLX mismatch #error guards (not needed with GLAD)
- Replace unavailable EXT symbols with core GL equivalents in
GLCanvas3D.cpp (GL_MAX_SAMPLES, glRenderbufferStorageMultisample,
glBlitFramebuffer, GL_READ/DRAW_FRAMEBUFFER)
- Update log messages from glewInit to gladLoadGL
* Fix Phase 3B+3C: remove GLEW find, clean EXT symbols, update attribution
- Remove find_package(GLEW) block from root CMakeLists.txt since GLEW
is no longer linked by any main application code
- Remove "glew" from SLIC3R_STATIC option description
- Replace all remaining EXT framebuffer symbols with core equivalents
in render_thumbnail_framebuffer_ext and _rectangular_selection_picking_pass
- Update AboutDialog credits from GLEW to GLAD
* Enable EGL in wxWidgets and add runtime GLX/EGL selection for Wayland
- Set wxUSE_GLCANVAS_EGL=ON in wxWidgets build and Flatpak manifest
- Add PreferGLX() call on X11 sessions for driver compatibility
- Remove Phase 2 safety fallback (EGL is now always compiled in)
- Guard SwapBuffers against hidden canvases to prevent Wayland stalls
* Fix Phase 4: move PreferGLX to app startup, fix FPS counter guard
Move wxGLCanvas::PreferGLX() from OpenGLManager::create_wxglcanvas()
(static initializer) to GUI_App::on_init_inner() before any wxGLCanvas
is constructed. This prevents a race where SkipPartCanvas could trigger
wxGLBackend::Init() before the GLX preference is set. The new location
also adds explicit is_running_on_wayland() detection with a warning for
unknown backends.
Move increment_fps_counter() inside the IsShownOnScreen() guard so FPS
is only counted when a frame is actually swapped.
* Update GLFW from 3.3.7 to 3.4 for runtime Wayland/X11 backend selection
Replace the compile-time GLFW_USE_WAYLAND flag (which locked to a single
backend) with GLFW 3.4's GLFW_BUILD_WAYLAND + GLFW_BUILD_X11 flags that
build both backends and auto-select at runtime based on the available
display server. This enables the CLI thumbnail renderer to work on both
Wayland and X11 sessions without separate builds.
* wayland: Fix UI call sites that rely on global screen coordinates
On Wayland, wxGetMousePosition() returns (0,0) and SetPosition() is a
no-op for top-level windows. Fix the highest-impact call sites:
- GLCanvas3D: Use cached m_mouse.position from event handlers instead
of wxGetMousePosition() + ScreenToClient() in get_local_mouse_position()
- Plater: Use event-relative coords via ClientToScreen(e.GetPosition())
instead of wxGetMousePosition() in 3 leave-window handlers
- BBLTopbar: Use event.GetPosition() and FindToolByPosition() directly
in mouse handlers instead of wxGetMousePosition()/FindToolByCurrentPosition()
- Search: Use focus-based dismiss logic on Wayland instead of
wxGetMousePosition()-based rect checks in SearchDialog and
SearchObjectDialog
- GUI_App: Skip SetPosition() in window_pos_restore() on Wayland where
it is a no-op; still restore size and maximize state
- Button: Position tooltip relative to button widget via ClientToScreen
instead of wxGetMousePosition()
* Fix SearchDialog Wayland dismiss: guard against search_line focus
* flatpak: Add Wayland socket permission for native Wayland support
* spec
* Fix crash on Wayland when wxWidgets lacks EGL support
Restore the safety fallback that forces GDK_BACKEND=x11 when wxWidgets
was not built with wxUSE_GLCANVAS_EGL=ON. Without this, the GLX backend
tries to access a non-existent X11 display on native Wayland, crashing
in wxGLCanvas::IsDisplaySupported() with SIGSEGV at offset 0xe4.
Also add a defense-in-depth guard in detect_multisample() that skips
the IsDisplaySupported call entirely on Wayland without EGL.
Root cause: deps/wxWidgets must be rebuilt after enabling EGL. The
compile-time check in OrcaSlicer.cpp detects the mismatch and falls
back safely.
* Fix EGL detection: use wxHAS_EGL instead of wxUSE_GLCANVAS_EGL
wxUSE_GLCANVAS_EGL is a CMake build option, NOT a C++ preprocessor
macro. The actual macro defined in wxWidgets setup.h is wxHAS_EGL.
All compile-time EGL checks were using the wrong macro, causing
the safety fallback to always trigger even with a properly built
EGL-enabled wxWidgets.
* Fix GL function pointers invalidated on Wayland/EGL
gladLoaderLoadGL() dlopen's libGL.so.1 to resolve GL function pointers
via dlsym, then immediately dlclose's the handle. On X11/GLX this is
fine because the GLX context keeps libGL.so mapped. On Wayland/EGL,
nothing else holds libGL.so open, so dlclose unmaps it and all function
pointers become dangling — causing SIGSEGV on the first GL call.
Fix: on Wayland, use gladLoadGL(eglGetProcAddress) which resolves
function pointers through the EGL loader without opening/closing
libGL.so.
* fix crash on start and various rendering issues
* fix crash on close
* small refactor
* move GPU selection to desktop file
* clean up a bit
* clean up more
* fix appimage error
Includes (but is not limited to) the following commits:
SPE-2218 - libvgcode - Fixed color of wipe moves for speed range view
SPE-2218 - libvgcode - Fixed detection of fan speed range
SPE-2218 - libvgcode - Fixed detection of temperature range
SPE-2218 - libvgcode - Fixed colors for Actual volumetric flow rate view
SPE-2214 - Fixed detection of toolpaths bounding box in GCodeViewer
SPE-2206 - Modified LibBGCode.cmake to get latest version of libbgcode which fixed parsing of gcode lines G4
libvgcode - Fixed potential out of bound access in ViewerImpl::update_view_full_range()
Tech ENABLE_GL_CORE_PROFILE set as default
Tech ENABLE_OPENGL_ES replaced by build option SLIC3R_OPENGL_ES
libvgcode - Precompiler definition of ENABLE_OPENGL_ES moved into CMakeLists.txt
Added missing include
libvgcode - Textures setup modified to work when building using emscripten
libvgcode - small optimization
libvgcode - fixed OpenGLWrapper::unload_opengl()
libvgcode - CMakeLists.txt modified to work with emscripten
libvgcode - Replace 'glVertexAttribIPointer()' with 'glVertexAttribPointer()' in SegmentTemplate::init() for OpenGL ES
libvgcode - Replace 'xor' with '^' Bitset.hpp
libvgcode - Newer glad library for OpenGL 4.6 and OpenGL ES 3.0
libvgcode - Alternate fix in method ViewerImpl::update_heights_widths() for OpenGL ES
libvgcode - Fixes in glAssertRecentCallImpl()
libvgcode - Fixes in method ViewerImpl::update_heights_widths() for OpenGL ES
Fixed ES shaders so they work with OpenGL ES 3.0
libvgcode - Use multiple plain textures in place of texture buffers for OpenGL ES
libvgcode - Use plain textures in place of texture buffers for OpenGL ES (partial implementation using one texture per buffer)
libvgcode - refactoring of class OpenGLWrapper
libvgcode - small refactoring in shaders
libvgcode - replacement of glMapBuffer() call for OpenGL ES
Fixed warning
libvgcode - Changes into CMakeLists.txt
Fixed debug export of gcode data to be configuration indipendent
Disabled tech ENABLE_NEW_GCODE_VIEWER_DEBUG
Removed obsolete tech ENABLE_GCODE_VIEWER_DATA_CHECKING
Code cleanup and techs removal - completed
Code cleanup and techs removal - step 1
SPE-1872: Implemented G2/G3 lines discretization for gcfMarlinFirmware firmware flavour
SPE-1872: Corrections into GCodeProcessor::process_G2_G3() to match firmware code
SPE-1872: Actual speed profile - Further enhancements of imgui debug window
SPE-1872: Actual speed profile - Rework in its calculation + enhanced imgui debug window
SPE-1872: New imgui widget to show actual speed profile
SPE-1872: Fixed actual speed for seam moves and at extrusion/travel/wipe start
SPE-1872: Fixed rendering of wipe moves when actual speed view is selected
SPE-1872: Actual speed profile extended to travel and wipe moves
SPE-1872: Fixes in function recalculate_trapezoids() and method GCodeProcessor::TimeMachine::calculate_time() to smooth actual speed profile
SPE-1872: Added debug graphic to show move actual speed profile
SPE-1872: libvgcode library: replace volumetric flow rate data with mm3_per_mm to reduce memory usage
SPE-1872: Added visualization of actual volumetric flow rate
SPE-1872: Fixes in calculating actual speed
SPE-1872: Added visualization of actual speed in gcode preview
SPE-2124: Added command line option 'opengl-aa' to allow the user to turn on the automatic selection of max number of supported samples for OpenGL antialising
#12117: Reduced moire patterns by using the highest number of samples available for multisampling
New gcode visualization integration - Partially enabled imgui debug window
New gcode visualization integration - Fixed center of gravity calculation and rendering
New gcode visualization library - Interface for estimated times
New gcode visualization library - Tool marker rendering
New gcode visualization library - Axes aligned bounding boxes calculation
Removed obsolete debug code
New gcode visualization library - Added statistic of used memory
New gcode visualization library - Separation of tool colors and color changes colors to simplify client code
Added missing include
New gcode visualization library - Added print color changes detection
New gcode visualization library - Modified OpenGL ES context detection
New gcode visualization library - Another makefile cleanup
New gcode visualization library - Makefiles cleanup
New gcode visualization library - Added suppression of error 'This function or variable may be unsafe' in VS2022
New gcode visualization library - Compatibility with OpenGL ES
New gcode visualization library - Interface cleanup and documentation
New gcode visualization library - Extended interface to give access to estimated times
New gcode visualization integration - Toggling of top layer only view state
New gcode visualization integration - Removed imperial units from tool position data
Small refactoring
New gcode visualization library - Custom values for travel and wipe moves radius
New gcode visualization library - Allow customization of range colors
New gcode visualization library - Partial update of interface comments/documentation
New gcode visualization integration - Follow-up of 35ee55e29bb231fd01a2eb71ae293832a37ca65d - Better fix for toolpaths visible range when toggling options' visibility
New gcode visualization integration - Fixed toolpaths reset
New gcode visualization library - Fixed method set_option_color()
New gcode visualization library - Fixed method ViewerImpl::set_extrusion_role_color()
New gcode visualization library - Added methods to release gpu resources on demand.
New gcode visualization library - Travel and wipe moves as options
New gcode visualization integration - Fixed toolpaths visible range when toggling options' visibility
New gcode visualization integration - Fixed management of gcode preview view type
New gcode visualization - Fixed wrong include
New gcode visualization - Added missing headers
New gcode visualization - Refactoring + added missing headers
New gcode visualization - New code set as standalone library + embed glad library to load OpenGL functions
New gcode visualization - Fixed errors and warnings when building the new code as a standalone library
New gcode visualization integration - Fixed layers ordering in pre-gcode preview
New gcode visualization integration - Fixed objects' tool colors in pre-gcode preview
Code cleanup
New gcode visualization integration - Tool position properties data window
New gcode visualization integration - Fixed in export toolpaths to obj
New gcode visualization - Inlining in source code
Refactoring
New gcode visualization integration - Export toolpaths to obj
Some refactoring and warning fix
New gcode visualization integration - Customizable travel moves colors
New gcode visualization integration - Customizable options colors
New gcode visualization integration - Customizable extrusion roles colors
New gcode visualization integration - Fixed pre-gcode preview layers times
New gcode visualization integration - Modify pre-gcode preview to use the new toolpaths renderer, objects WIP
New gcode visualization - Modify pre-gcode preview to use the new toolpaths renderer, WIP (brim/skirt/wipe tower)
New gcode visualization integration - Do not reset visible range when toggling options/roles visibility
New gcode visualization - Fixed color of first vertex of top layer (when top layer only option is enabled)
New gcode visualization - Customizable travels and wipes segment radius
New gcode visualization integration - Removed tech ENABLE_GCODE_VIEWER_STATISTICS
New gcode visualization integration - Added check of OpenGL version
New gcode visualization integration - Removed GCodeProcessorResult::spiral_vase_layers
Another bunch of warnings fixes
Fixed warnings
New gcode visualization integration - Removal of old visualization
Fixed includes
New gcode visualization integration - File structure of new code separated in api + src
New gcode visualization integration - View ranges management moved to new visualizer
New gcode visualization integration - Fixed top layer only visualization for MMU printers
New gcode visualization integration - Removed dependency on imgui from new visualizer
Some refactoring
New gcode visualization integration - Removed dependency on Slic3r::GCodeProcessorResult from new visualizer
New gcode visualization integration - Moves' data conversion moved to client side
New gcode visualization: layers times refactoring
A bunch of fixes for the new gcode visualization
New gcode visualization: render in gray color layers containing pause print or custom gcode options when in Color Print view
New gcode visualization integration - Tool colors
New gcode visualization integration - Layers times
New gcode visualization integration - Travels and Extrusion roles times
Fixed detection of start/end of contiguous extrusion paths
New gcode visualization integration - Extrusion roles
New gcode visualization integration - Colors
New gcode visualization integration - Tool position
Center of gravity and tool marker may both be rendered with fixed screen size and a scaling factor
Fixed rendering of options in new gcode visualization
Tool marker NOT rendered by the new visualization code
Center of gravity marker NOT rendered by the new visualization code
Fixed toolpaths_cog shaders
Tool position window for new gcode visualization
Top layer only coloring for neww gcode visualization
Refactoring in preview's new visualization
Hidden imgui debug dialog for new visualization in preview
Synchronization of moves between old and new visualization
Fixed missing gcode window in new visualization
Rendering of debug imgui dialog moved from class libvgcode::Viewer to class libvgcode::Toolpaths + warnings fixing
Some functionality moved from class libvgcode::Viewer to class libvgcode::Toolpaths
Some refactoring and cleanup
Refatoring of PathVertex and Toolpaths::load()
SPE-1982: Tech ENABLE_NEW_GCODE_VIEWER - 1st installment of new toolpaths rendering code (WIP)
* Remove extra spaces between words
* Remove extra spaces after punctuation
* Remove extra spaces before punctuation
* Always needs a space after punctuation
* Always needs a space before parens
* Remove trailing spaces before newline
According to https://eigen.tuxfamily.org/dox/TopicPitfalls.html one
should just avoid using `auto` as the type of an Eigen expression.
This PR fixes most of them I could found in the project. There might be
cases that I missed, and I might update those later if I noticed.
This should prevent issues like #7741 and hopefully fix some mysterious
crashes happened inside Eigen calls.
* Sidebar > Height range > Add / Delete range icons
* Add icon for Object list > Layers (Height Range)
* Add icon for Object list > Range (Hight Range item)
* Add icon for Object list > Support / Color painting
* File Renamed for Calibration Tab
* Update Sidebar icons
* Add icon for CrossHatch fill pattern
* Delete leftover icons from previous commit
* Update Filament Settings icons
* Update Machine Settings icons
* Update plaholders editor icons
* Fix for Printer Setting > Extruder icons and Add support for icons for its tabs
* Update undefined category icon on compare window with low res compatible one
* Update toolbar > variable layer height icon
* Fix warning icon on Emboss & SVG gizmo
* Delete leftover icons from previous commit
* Gizmos > Keyboard cheat sheet icon resolution fix
* Combo box arrow resolution fix
* Delete leftover icons from previous commit
* Update plate & toolbar icons
* Fix: ComboBox > Dropdown menu checkmark not visible on light theme
* Delete leftover icons from previous commit
* Restore icons for plate rename
* Swap directions of notification expand / collapse icons
* Mixed
• Increases contrast of icons on light theme
• Removes opacity from edit, delete, search... icons
• Fixes different color for advanced toggle on dark mode
• Fixes checkboxes not aligned with other boxes
• Style fixes for checkboxes
* Fix some colors not changing
* Slightly changed color paint icon
Spray icon is now taller and fits better with brush icon on seam / support paint
* Minor changes on seam and support related icons
* Fix blurry icons that vertically centered on gizmos
* Update warning icon on dialogs
* Fix plate icons rendering issue
* Update icons for Gap fill and Fill on color paint and add icon for Skirt
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Rework UI jobs to make them more understandable and flexible.
* Update Orca specific jobs
* Fix progress issue
* Fix dark mode and window radius
* Update cereal version from 1.2.2 to 1.3.0
(cherry picked from commit prusa3d/PrusaSlicer@057232a275)
* Initial port of Emboss gizmo
* Bump up CGAL version to 5.4
(cherry picked from commit prusa3d/PrusaSlicer@1bf9dee3e7)
* Fix text rotation
* Fix test dragging
* Add text gizmo to right click menu
* Initial port of SVG gizmo
* Fix text rotation
* Fix Linux build
* Fix "from surface"
* Fix -90 rotation
* Fix icon path
* Fix loading font with non-ascii name
* Fix storing non-utf8 font descriptor in 3mf file
* Fix filtering with non-utf8 characters
* Emboss: Use Orca style input dialog
* Fix build on macOS
* Fix tooltip color in light mode
* InputText: fixed incorrect padding when FrameBorder > 0. (ocornut/imgui#4794, ocornut/imgui#3781)
InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794)
(cherry picked from commit ocornut/imgui@072caa4a90)
(cherry picked from commit ocornut/imgui@bdd2a94315)
* SVG: Use Orca style input dialog
* Fix job progress update
* Fix crash when select editing text in preview screen
* Use Orca checkbox style
* Fix issue that toolbar icons are kept regenerated
* Emboss: Fix text & icon alignment
* SVG: Fix text & icon alignment
* Emboss: fix toolbar icon mouse hover state
* Add a simple subtle outline effect by drawing back faces using wireframe mode
* Disable selection outlines
* Show outline in white if the model color is too dark
* Make the outline algorithm more reliable
* Enable cull face, which fix render on Linux
* Fix `disable_cullface`
* Post merge fix
* Optimize selection rendering
* Fix scale gizmo
* Emboss: Fix text rotation if base object is scaled
* Fix volume synchronize
* Fix emboss rotation
* Emboss: Fix advance toggle
* Fix text position after reopened the project
* Make font style preview darker
* Make font style preview selector height shorter
---------
Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: ocornut <omarcornut@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Ian Bassi