Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
* Remove unused `get_printer_preset` calls.
* `Plater::check_printer_initialized` should skip nozzle flow type checks if nozzle is unknown.
Also remove unnecessary `is_multi_extruders` check.
* Remove unused `CalibUtils::is_same_nozzle_diameters()` fn.
* Simplify `CalibUtils::check_printable_status_before_cali`.
The single-arity can delegate to the vectorized arity.
* Add `DevExtruderSystem::NozzleDiameterMatchesOrUnknown` to simply checks.
* Update `CalibrationPresetPage::update_sync_button_status()` to use `NozzleDiameterMatchesOrUnknown`.
Simplify logic by iterating over each extruder and checking for diameter and volume type match.
The previous code had several mistakes (from what I could tell):
- `curr_obj->is_multi_extruders()` doesn't imply exactly 2 extruders
- the single/multi branch served no purpose
- the single branch failed to check the volume type
* Specify `std::fabs` and add explicit import.
Ref: https://github.com/OrcaSlicer/OrcaSlicer/pull/13330#discussion_r3133613736
Not sure how idiomatic this is in C++ / OrcaSlicer codebase, but CoPilot suggested it and it seems reasonable.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
# Description
Transforming internal 3D Files to DRC to reduce orca size
## Calibs
(Not counting temperature_tower)
Original 6,01 MB
Converted 1,57 MB
- Mesh (STL/3MF) to LossLess DRC
- SCV-V2 116kb -> 15kb
- fast_tower_test 66kb -> 9kb
- ringing_tower 172kb -> 22kb
- pressure_advance_test 124kb -> 16kb
- tower_with_seam 2kb -> 1kb
- retraction_tower 1.726kb -> 97kb (done at 25, if 0 = 212kb)
- ~~temperature_tower~~ Updated, fixed, wider range and Draco in: #12103 5.075kb -> 485kb
- vfa 1.453kb -> 179kb
- Step
- SpeedTestStructure 1.312kb -> 86kb
- Imported:
- Linear Deflection: 0.002
- Angle Deflection: 0.25
- Exported as LossLess DRC
## Handy Models
Original 4,66 MB
Converted 1,53 MB
- STL/3MF to LossLess DRC (Maybe reduce the bit depth???)
- 3DBenchy 2.417kb -> 570kb (done at 25, if 0 = 1.340kb)
- calicat 43kb -> 6kb
- ksr_fdmtest_v4 128kb -> 74kb
- Orca_stringhell 63kb -> 37kb
- OrcaToleranceTest 758kb -> 94kb
- Stanford_Bunny 755kb -> 187kb (done at 25, if 0 = 316kb)
- Voron_Design_Cube_v7 34kb -> 21kb
## Bit used
After some test with a lot of models and all possible combinations it's safe to say that >20 is BondingBox and mm3 volume the best it can.
So i used 25 just as a safe value in:
- Stanford_Bunny
- 3DBenchy
- retraction_tower
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/bb5000cf-c1fa-4153-af2f-691ea59bc254" />
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/f38e3528-0d05-4621-984e-f107a0eec91e" />
## MultiPart 3MF
Didint change them, too much trouble for small changes.
# Description
### `src/libslic3r/PrintApply.cpp` changes (line 318)
Change `const auto` to `const auto&` for loops (simple optimization) .
### `src/slic3r/Utils/CalibUtils.cpp` changes (lines 762, 766, 779, 783/784, 814, 816, 831, 835, 837, 1001)
Define config_pattern
`const auto& config_pattern = SuggestedConfigCalibPAPattern();` (line 762 and 814)
Replace calls of `SuggestedConfigCalibPAPattern()` with `config_pattern` (lines 766, 775, 779, 783, 784, 816, 831, 835, 837)
Change `const auto` to `const auto&` for loops (simple optimization) (lines 816, 835, 837, 1001)
*Also gets rid of the five compiler warnings out of the few hundred/thousand (when building the entire project) that warn about copying loop variables*
i.e.
```/home/neo/git/OrcaSlicer-EDIT-TEMP/src/slic3r/Utils/CalibUtils.cpp:828: note: use reference type to prevent copying
/home/neo/git/OrcaSlicer-EDIT-TEMP/src/slic3r/Utils/CalibUtils.cpp:832: warning: loop variable ‘opt’ creates a copy from type ‘const std::pair<std::__cxx11::basic_string<char>, int>’ [-Wrange-loop-construct]
832 | for (const auto opt : SuggestedConfigCalibPAPattern().int_pairs) { print_config.set_key_value(opt.first, new ConfigOptionInt(opt.second)); }
```
## Tests
Should have no functional difference. Contains optimizations, calibrations appear to still function well.
* Add option to allow upload to SD-Cards marked as abnormal, also add better error description
+ Adds the options under the Network Settings to allow upload to abnormal SD-Card.
+ If not enabled user will now see why the upload is stuck at 10% depending on the sd_card_state (Readonly/Abnormal)
* Merging with current branch, and updateing "sd-card" to "storage"
* Generate localization and also change remaining sd_card_abnormal states to _storage_abnormal
* Fix issues from merge, and other bugfixes.
* Regenerate localization files.
* Improve Missing Storage Message, Add skip for abnormal storage in printer select dialog
and cannot set cali step to 0.001
jira: STUDIO-14042 & STUDIO-14119
Change-Id: I56ecc70d0413398ecacd1c842f7102e810277cfd
(cherry picked from commit c16925931c642d8e27d739a401148bc94c5f3965)
1. Use the minimum flush between nozzle volume and flush in datalist
2. Add a new param to decide the datalist to use
3. set for o1s
github:7445
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7b3b69ee06f984b279ae4be47f70f5a472703b15
(cherry picked from commit 036fa80eea9ef8e02d9c9c9e6e7974d5a9a08131)
