Port from BambuStudio commit c8f70c6ca. Shows a warning when AMS
is actively drying during print job preparation, alerting users that
the drying temperature will be lowered during printing.
Three-page wizard: main status/control page, guide page with
filament tray status, and progress page. Supports N3F and N3S AMS types.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
fix(gui): avoid null-pointer UB in create_scaled_bitmap with win == nullptr
create_scaled_bitmap() documents that win may be nullptr, but called
win->FromDIP() on it. Calling a member function through a null pointer
is undefined behavior: clang assumes `this` is non-null and deletes the
subsequent `win ?` null check added in #13117, turning the fallback
branch into an unconditional virtual call through a null vtable.
This crashed LLVM/clang-cl builds at startup (access violation reading
0x0 in BBLTopbar creation); MSVC builds were unaffected by luck.
Use the static, null-safe wxWindow::FromDIP(x, win) overload instead,
which falls back to the primary display DPI. Behavior is unchanged for
non-null windows.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
The 409 conflict notification, the force-push confirmation dialog, and the payload-too-large (413) dialog now name the affected preset. The name was already parsed from the conflict body but never surfaced. The account-level preset-limit message stays generic since it isn't about one specific preset.
* Fix reload from disk for STEP models after reopening a project (#12992)
reload_from_disk matched reloaded source volumes with an exact
source.input_file string comparison. After a project is saved and
reopened, the stored source path is only the filename (the default,
non-full-path save) while a freshly re-imported volume carries a full
path, so the comparison never matched: reload fell into fail_list and
the "locate file" dialog was effectively useless for STEP models.
Fall back to a case-insensitive filename comparison when the exact
paths differ, so the existing same-folder source lookup (and the
locate dialog) can reload the model. Projects that stored absolute
source paths still match exactly as before; no 3mf format change.
* Add Preferences option to store full source paths in projects
Expose the existing export_sources_full_pathnames setting (previously
only editable in the config file) as a checkbox under Preferences >
General > Project. Enabling it stores absolute source paths in saved
projects, so "Reload from disk" works when the source file is kept in
a different folder than the project (companion to #12992).
* fix: crash in Measure tool when a plain edge is the first selection
The SPHERE_2 gripper raycaster called get_feature_offset() on
.first.feature instead of .second.feature (copy-pasted from the SPHERE_1
block). Plain planar-border edges store no extra point, so the Edge
branch dereferenced an empty optional behind a release-stripped assert,
aborting on Flatpak and undefined behavior elsewhere.
Point the SPHERE_2 raycaster at .second.feature and fall the Edge branch
back to the edge midpoint.
Fixes#14018
{input_filename_base} is meant to be the saved project's file name. Before
#13753 a bug made it fall back to the first object's name when a project was
saved; #13753 fixed it to use the project name. Some users relied on the old
behavior to get the part name into their output file name and had no
placeholder to recover it ({model_name} is the 3mf designer metadata, blank
for plain STL imports).
Add {first_object_name} as a dedicated placeholder for the first printable
object on the current plate, populated in update_object_placeholders()
independently of {input_filename_base}.
Closes#14493
Selecting the prime tower and rotating it (PageUp/PageDown) crashed.
Selection::notify_instance_update() indexed m_model->objects with the
wipe tower's synthetic id (>= 1000), which is not a ModelObject index,
so the lookup returned garbage and dereferencing it segfaulted.
do_rotate/do_scale/do_mirror already skip the wipe tower in their own
loops but all call this shared helper, so scale and mirror hit the same
fault. Selection::drop() had the same latent bug via a direct index.
Guard both with the >= 1000 check already used throughout the file.
Fixes#14498
* Support accessing `coFloatsOrPercents` values in gcode template (OrcaSlicer/OrcaSlicer#14522)
* Vector option values are separated by comma
* Fix wrong cast used for checking nullability
Fix network plug-in install failing when the plug-in DLL is in use (#14373)
Switching or reinstalling the Bambu network plug-in from a running
OrcaSlicer failed with "The plug-in file may be in use". install_plugin()
deleted each existing file before extracting the new one, and on Windows a
currently-loaded DLL (BambuSource.dll, or the legacy networking library)
cannot be removed or overwritten in place, so the whole install aborted.
Rename an in-use file aside to "<name>.old" before writing the new one: the
running module keeps mapping the renamed file while the new version is
extracted, so the install succeeds without having to unload the plug-in
first. Stale ".old" files are cleaned up at the start of on_init_network(),
before the plug-in is (re)loaded, so they do not accumulate.
# Description
There is a bug that if user used to use legacy plugin, the
`NetworkAgent::use_legacy_network` will not be properly reset after user
install a newer plugin version through the plugin update dialog (ie, not
from selecting a plugin version from Preference screen). And in that
case Orca will download the legacy plugin but instead installing it with
a newer version suffix. So on next start up Orca can't find the plugin
because it tries to load using legacy version suffix instead.
This PR fixes it by getting rid of that error-prone static variable,
instead it always use the version number directly.
Fix#14373Fix#14441
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
