* Normalize the junction direction vector over XYZE
calc_vmax_junction_deviation() treats the dot product of two jd_unit_vec as a
cosine, but the vectors were scaled by 1 / block.distance, which is the XYZ
length. On an extruding move the E component then pushes the 4D norm above 1 and
the dot product below -1, so the corner reads as straighter than it is and is
planned too fast -- the more so the higher the flow. Measured on a 6 degree
corner at scv 5: 86.9mm/s with no extrusion, 94.4mm/s at 0.029mm/mm, 150.0mm/s
at 0.1mm/mm.
Neither firmware does that. Marlin normalizes over XYZE for any extruding move
(planner.cpp: `if (... || esteps > 0) normalize_junction_vector(unit_vec)`) and
Klipper leaves E out of the cosine entirely, dotting only axes_r[0..2]
(toolhead.py::Move.calc_junction). Normalizing satisfies both: with E normalized
in, the cosine differs from the XYZ-only one by ~1e-5 at printing flow rates.
This is a deliberate divergence from PrusaSlicer, which still scales by
1 / distance -- it carries an older Marlin's behaviour.
Travel moves are unaffected, their vector was already unit length.
Reported by Copilot in review of #15304.
* Test that extrusion rate does not change corner planning
The junction deviation tests were all travel-only, which is exactly why the E
component of the junction vector went unchecked. Cover it: the same corner has
to be planned the same whether nothing, an ordinary 0.42 x 0.2 line, or a fat
large-nozzle line is extruded through it, on both Klipper and Marlin 2.
Reported by Copilot in review of #15304.
* Plan corners with junction deviation where the firmware uses it
The time estimator only ever had the classic per-axis jerk model, which limits a
corner by the largest single-axis component of the velocity change. That is
anisotropic: the same corner is allowed sqrt(2) more speed on a diagonal than on
an axis, which paints a four-lobed ripple around every circular wall in the
actual speed and actual flow views, worst on small parts whose walls are made of
short segments.
Klipper has no classic jerk at all and Marlin 2 has none while M205 J is in use;
both plan corners with junction deviation, which sees only the corner angle. Add
that model and use it for those machines:
- Klipper: derived from the square corner velocity, as the firmware does
(jd = scv^2 * (sqrt(2) - 1) / max_accel), reading the scv from
machine_max_jerk_x, where process_SET_VELOCITY_LIMIT() already stores
SQUARE_CORNER_VELOCITY.
- Marlin 2: machine_max_junction_deviation, which was already loaded into the
machine limits but never reached the planner.
- Every other flavor keeps the classic jerk path unchanged.
The model has no per-axis jerk floor, so this also drops the hard slow spot the
estimator drew at the start of every loop from machine_max_jerk_e.
Toolpaths are unaffected: on a full export the only lines that change are M73.
The junction deviation maths, including Marlin's JD_HANDLE_SMALL_SEGMENTS arc
approximation, is ported from PrusaSlicer's src/libslic3r/GCode/GCodeProcessor.cpp.
The Klipper mapping is not in PrusaSlicer, which ignores SET_VELOCITY_LIMIT.
* Add tests for junction deviation corner planning
Cover the three properties the change rests on:
- a right angle on Klipper is planned at exactly the square corner velocity,
the identity that makes the scv to junction deviation mapping correct, and a
shallow corner is planned far faster than per-axis jerk allows;
- junction deviation gives the same speed whatever the corner's orientation,
while classic jerk keeps its sqrt(2) spread, which is the four-lobed ripple;
- machines that do not plan with junction deviation are provably untouched,
including a Marlin 2 printer that has it disabled.
# Description
Printers discovered/bound under one printer agent (e.g. built-in BBL)
were leaking into another, independent agent's "My Device"/"Other
Device" lists and inheriting its saved access code, since neither the
device list nor bind state was ever scoped by which agent found them.
- Add printer_agent_id to MachineObject/BBLocalMachine, stamped at
discovery/bind time; filter get_my_machine_list(),
get_my_cloud_machine_list(), and update_other_devices() by it.
- clear_other_devices() now drops entries stamped by the outgoing
agent on swap, so the incoming agent's own discovery re-inserts and
re-stamps them fresh instead of leaving them stale-tagged forever.
- Scope access_code by (dev_id, printer_agent_id) on BBLocalMachine
(LAN only since cloud's userMachineList is always refreshed live from
the account API, so it isn't at risk the same way), with a
BBL-only legacy fallback to the old flat access_code/user_access_code
keys so existing bindings keep working.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Selecting the web Device tab loaded the printer's web UI from the selected discovered machine
when the preset carried no host. That arm was lost merging main into this branch — two of the
three Plater.cpp hunks from #15134 survived, this one did not — leaving the tab blank, since
PrinterWebView starts on an empty URL and nothing else navigates it.
In printer-agents mode the legacy web page was appended under Notebook::PAGE_MONITOR, which
resolves to the same "monitor" id as the native Device tab. FindPageByName returns the first
match, so PluginPages::relayout() — which saves the selection by name and restores it after
rebuilding the tab strip — moved the user off the web tab onto the native one. The tab also
disagreed with its own label, being created as "Device (legacy)" and renamed to "Device (Web)"
on the next show_device() call.
Per material slot, the Publish dialog can now embed the entire filament preset ("Full Publish") and require a curated filament type and/or colour:
- On export, full-publish vector options are masked to the author's slot so unrelated slot data never leaks into the published file.
- On load, slots are matched by the published type: a match keeps the receiver's material (full dumps ignored, partial keys applied); a mismatch replaces the slot with the first visible same-type library filament, falling back to a temporary embedded preset or skipped keys when none exists. Required colours apply regardless of the type match.
- The receiver's slot count grows only to the highest published slot.
- Published 3MFs load as a new project: the file's path is not adopted as the project filename, published metadata is stripped from the model, and the file is added to recent projects.
- Notifications list replaced slots, and the edited filament preset is refreshed so applied values surface in the GUI.
- Dialog: "Full Publish" toggle replaces the material opt-in and select-all headers; new Color/Type requirement rows with swatches.
- Add Ctrl+Shift+E shortcut for the Publish dialog (menu, key handling, and the keyboard shortcuts dialog).
- Tests for export slot masking, metadata round-trip, replacement semantics, slot growth, and skipped-key reporting.
Lam Wei Lun