* Toolchange Cyclic Order
* Apply cyclic order to first layer
* Unit test
* Copilot fixes
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
gcode_back_transform, first_layer_plane* and belt_printer_infinite_y fell through to invalidate_all_steps(), which re-ran tool ordering, skirt/brim and G-code export on toggles that only affect G-code export.
Merge origin/main (00429da739) into belt-printer.
Conflicts resolved:
- src/CMakeLists.txt: keep both wxInspector workarounds.
- GCodeProcessor.cpp: keep the belt compare_pos / z_for_height lines.
- PrintObjectSlice.cpp: the belt bbox-Z guard also covers main's
printable_region_ids bookkeeping.
- TreeSupport.cpp: the belt-floor check runs before main's PendingNode
queueing.
- Tab.hpp: keep the belt fields, drop the removed upload description
fields.
- tests/libslic3r/CMakeLists.txt: keep both test files.
Also included:
- eSUN PLA belt presets declare their own filament_id (OFkrxQC4) and
scripts/filament_id_snapshot.json is regenerated, as main's filament_id
check requires.
- Custom.json version bumped to 02.04.00.05 so the belt entries reach
existing installs.
- Fix the ambiguous WithinRel call in the belt apron width test, which
otherwise breaks the fff_print build.
Two independent leaks of filament on the belt purge prism, plus the
replan safety net the second one needs.
1. The early-truncation scan bounded itself with the prism's own
toolchanges. ToolOrdering covers the whole print and the prism is a
printed object in it, so the "last toolchange" the scan found was on
the prism's own top layers -- it runs past every model object by
design -- and the truncation cancelled nothing. Bound the scan at the
tallest non-prism object (support layers included; on a belt they can
top the object). On MCTEST5 that was 197 toolchanges over 39.4 mm of
tower that no swap ever needed.
2. On a layer with no toolchange, the prism's entire fill printed as
solid infill in its own filament. Drop the fills no toolchange
claimed, right after the purge marking and before
ensure_perimeters_infills_order() force-overrides whatever is left.
Perimeters stay so the bar keeps a continuous wall. An earlier version
of this deleted the entities and had to be reverted: psWipeTower can
rerun without regenerating infill, and a later tool ordering may claim
what this one did not. The entities are now stashed with their layer,
region and index and put back exactly, the same reversibility contract
layer truncation already had.
3. Both stashes go stale if an object step reruns: make_fills() clears
and regenerates fills over m_layers only, so a stale stash would put
old fills back next to new ones, and truncated layers would keep old
perimeters/fills. Undo the plan's edits at the top of Print::process()
whenever psWipeTower is not done. Every object-step invalidation also
invalidates psWipeTower, so that condition is exactly "some object
step may rerun"; when it is done nothing regenerates and the edits
must stay. This also covers a prism left behind after belt mode is
turned off, which previously stayed truncated forever.
WipingExtrusions::is_entity_overridden() becomes public so the prism can
tell claimed fills from unclaimed ones.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SsuY8Laiyh7q2zPVVKV3HZ
The preview brim, the placement margin and the pre-generation validation
warning each decided on their own whether the tower has a Type2 cone
base, reading the wall type and cone angle three different ways. The
preview's read cast the preset's enum to ConfigOptionEnum<T>, which a
preset-shaped config never holds, so the cone base was never previewed.
estimate_wipe_tower_first_layer_outline now answers that question once,
beside the footprint estimate, from the config and the resolved planner;
all three sites take the outline from it. The libslic3r case reads the
outline off a preset-shaped config, where the old cast came back empty.
The clamps and validation work from estimates. Once the tower is
generated, _make_wipe_tower re-tests the exact first-layer footprint,
brim and cone base included, against the printable area and the
exclusion zone, so an off-plate tower fails with a clear error instead
of exporting unprintable G-code. The rectangle-wall mesh footprint
learns the Type2 cone base so that check and the post-generation
validation see the real outline.
Pre-generation, validation hard-checks the body plus an explicit brim
and warns on the estimated auto brim and cone base with the existing
"may collide" strings, so the user hears about a marginal position on
the first slice rather than only at generation time.
Two fff_print fixtures that print a tower at the default position move
it onto the 200 mm test bed, as the multifilament fixtures already do:
the shipped default y of 220 is off that bed, and the backstop now says
so instead of exporting the tower.
The shared estimate reserved every tower with one volume-per-purge rule
and the stability floor. Both planners do more: WipeTower (Type1) wipes
each filament's own prime volume in whole lines, one block per
adhesiveness category sized by its worst layer, rams the leaving
filament at every nozzle change, and squares a rib tower from the
planned depth; WipeTower2 (Type2) spaces its lines by
wipe_tower_extra_spacing, not the Type1-only infill gap, and its extra
flow cancels out of the depth. Both extend the ribs rather than the body
below the stability minimum, size every layer including a thinner first
one, and lay the brim in whole loops, WipeTower reporting half a spacing
of line width on top.
All of that now lives in estimate_wipe_tower_footprint, fed the planner
(resolve_wipe_tower_type mirrors Print::wipe_tower_type and the CLI's
Bambu Lab detection) and the filament ids rather than a count. Print
passes its own tool set; the PartPlate adapter derives the plate's ids
from the passed config and treats an explicit count as a floor, so the
CLI's count-only callers size per filament too. The placement clamp also
reserves a Type2 cone's base bulge, which the body box does not cover.
The planner-mirroring helpers sit beside the planners in WipeTower and
WipeTower2 so the two stay in sync; the libslic3r cases pin them to
footprints measured from generated G-code.
Validation grows the estimated body by the brim before the tower is
generated, so a tower whose brim leaves the bed is rejected up front
instead of at export. The scene reload re-clamps the stored position,
since set_default_wipe_tower_pos_for_plate does not rerun when painting
changes the filament count. The rectangle-wall footprint polygon gets its
two missing brim corners (it was a skewed quad), so the post-generation
check covers the whole brim.
A raft is not a reason to reserve a tower. Print::apply runs
normalize_fdm_2, which clears enable_prime_tower for a plate that purges
one filament unless smooth timelapse or wrapping detection is on, so a
single-filament plate with a raft prints no tower at all and the estimate
was reserving bed area for one. Drop the input; need_wipe_tower is now
exactly the two exceptions normalize_fdm_2 honours, named there so the
next reason added has to be checked against it.
The GUI preview and the validation containment check each re-derived
"is a tower printed here" from the filament count instead of reading the
estimate, so both missed the towers printed with no tool change to purge
for. They now take the answer from the footprint, which is the drift this
shared estimate exists to remove. A tower that is not printed estimates to
zero, so its hull is degenerate and every check on it passes trivially -
the containment check needs no gate of its own.
WipeTowerData::width was written only by the pre-generation estimate and
left at zero for the whole post-generation life of the Print, while its
neighbour depth held the real value. Set it from the generator in both
branches.
The plate's height scan transformed every model part's full mesh per
instance on each scene reload, discarding all but the z extent. The
cached convex hull has the same z extent.
A plate loaded from a sliced .gcode.3mf holds no objects and its filaments
live in slice_filaments_info; the config-taking get_extruders overload
returned an empty list for it, which sized the tower for a placeholder two
filaments. It now answers the way the wx overload does, without reaching
the plater.
Also drop estimate_wipe_tower_size, which has no callers.
No IMEX code upstream, so nothing in this merge touches the feature. All 21 overlapping
files auto-resolved; verified every upstream addition is present in the merged tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Closes review comment 10.
`461c69c83e` settled this in April — IMEX internally, IDEX/IQEX as the user-facing label — but the
UI strings were never converted. Every translated string naming the feature now reads IDEX/IQEX:
41 occurrences across the printer and process option labels and tooltips, the modes editor, the
plate mode indicator, the pre-slice warnings, the placement refusals and the slicing errors. The
reviewer listed eight; the rest were in the same class.
Nothing else moves. The config keys keep the `imex_` spelling — `is_imex`, `imex_mode_names`,
`imex_parallel_mode` and the rest are on-disk format in existing printer presets and 3MF projects,
so renaming them would break every profile and project already saved. C++ identifiers, filenames,
comments and test names keep IMEX as well: it stays the internal name of the subsystem, which is
what covers the topology space (one gantry with 2-4 tools, 2x1 and 2x2 grids) that neither acronym
names on its own. Where a tooltip quotes a key, the key spelling is preserved and only the feature
word around it changed.
The `is_imex` tooltip is reworded rather than substituted: it already named the hardware families
parenthetically, so a literal replacement would have said IDEX/IQEX twice in one sentence.
No translation impact — no IMEX string had reached OrcaSlicer.pot or any catalogue, so there is
nothing to migrate. One test asserted on the old error text and now matches the new one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Closes review comment 11, and fixes a worse bug found while doing so.
The offset was only ever pushed from PartPlate::refresh_imex_slice_offset(),
reachable from update_slice_context() and the plater -- both GUI-only, and it
dereferences wxGetApp(). A headless slice therefore kept Vec2d::Zero(), so
orca-slicer --slice on a plate with imex_firmware_managed_zones emitted
slicer-managed coordinates while the firmware applied its own offsets on top.
Print::update_imex_slice_offset() now derives it from the applied config and runs
from process() and export_gcode(), so a CLI slice gets the value a GUI slice does.
It reads m_full_print_config rather than m_config because imex_tool_layout and
imex_carriage_margin are printer-preset options with no member in the static
PrintConfig, and it takes the mode from the same place GCode.cpp resolves it, so
the shift cannot disagree with the mode that is emitted.
The GUI push and Print::set_imex_slice_offset() are deleted rather than kept as an
override, because the two did not agree. calc_imex_zones() divides
get_extents(m_shape), and set_shape translates m_shape by the plate position, so
the pushed offset carried the plate origin -- which translate_to_print_space() and
the writer offset already subtract. Plate 1 sits at the origin and agreed by
accident; every later plate had the origin subtracted twice and was shifted by a
full plate stride. Not silent, either: the displaced geometry fell outside the
printable area, so slicing plate 2 failed validation with "part is off the plate".
Confirmed fixed on hardware profiles -- the same model on plates 1 and 2 now emits
identical extents.
Deleting the push also removes the post-apply ordering constraint that forced the
duplicate call in Plater::priv::update_background_process: the value is computed
at the point of use, and process()/export_gcode() are structurally after apply().
Also routes validate()'s primary-routing check through imex_resolve_routing() so
the hard block and the plater's warning cannot describe a plate differently
(review comment 20), and through find_imex_mode() for the mode lookup (18).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
The rule's comment claimed the plate "is not printable as configured: the
primary tool executes the toolpaths while the flow and temperatures were
computed for a filament it cannot load". That is not what the emitter does. It
never uses the declared primary -- it re-derives an effective one from the
filament actually in use -- so a plate whose only filament sits on a Span tool
sharing the primary's gantry produces coherent G-code and would print.
The refusal is still correct, but it rests on intent rather than physics: a
parallel mode exists to run carriages in parallel, and a single-colour plate
riding one span lane is not that. Left as a physical-impossibility claim, the
rule reads as a false positive to anyone who checks it against the emitter --
a review already flagged it as one -- and the obvious "fix" is to relax it.
Say which it is, and keep the genuinely-broken case distinct: a filament routed
to a head outside the mode's active tools still yields a stuck-hot nozzle, and
that one is not a matter of taste.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A mixed filament is unsupported in a parallel mode outright, but the rule saying
so ran third. A plate carrying a blend plus any second filament tripped the
multi-color rule's used > 1 gate first and was told its active tools all sit on
one gantry -- a diagnosis of a multi-color print the user never configured,
whose remedy is to go rework the mode's tool roster. The blend was never
mentioned. Move the check ahead of both rules below it; being unsupported
regardless of routing or topology, it dominates them.
Nothing is masked that leads anywhere else: every branch of
imex_multicolor_block_reason is itself confined to non-primary modes, so the
mixed message's remedy -- switch this plate to Primary -- silences those too.
Say "Mixed filaments", not "Blended". Every other string in the app calls these
mixed, including the button that creates one and the sibling refusal for the
wipe tower filament, so the user had no way to connect the message to the
feature it names.
Three comments in the block were wrong, and two of them were newly wrong. The
routing rule's bounds-check note still said "Blended slots are out of range by
construction, but they never reach here -- the rule above returns first": the
rule above is now the multi-color one, which does not return first for a single
mixed filament, and out-of-range is not guaranteed at all. Mixed slots are kept
at the tail of the filament arrays by convention, not by enforcement --
PresetBundle::set_num_filaments grows filament_is_mixed with resize(), so
raising a printer's extruder count with a blend present lands physical slots
after the mixed one. The scan is position-agnostic and stays correct; only the
stated reason was wrong.
The same discovery makes the empty-routed_list guard live rather than the dead
code it was described as. Print::apply() normalises physical_extruder_map before
validate() runs, so an unauthored map is never the cause -- but a printer with
more filaments than logical extruders leaves the tail slots outside the map, and
raising the extruder count does exactly that.
The new test validates the plate twice. The first pass, with no blend, asserts
the multi-color rule is armed at all; without it the second proves nothing,
because the rule only fires here thanks to a degenerate fixture mode whose two
tools share a gantry. Give that mode a Span tool and the whole test would pass
under either ordering while appearing to guard it. It also pins err.object,
which the mixed path sets and the multi-color path leaves null -- a discriminator
that survives the next wording change. Verified by reverting the order: the test
fails on both the message and the object.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The routing error ran to roughly 450 characters and explained the mechanism
before it got to the remedy. It also offered to "edit the mode in Printer
Settings so its Primary tool is one of %3%", which on a plate whose filaments
resolve to no head at all rendered as "one of no configured extruder". Cut it
to the mode, the tool it prints with, where the plate's filaments actually are,
and the two things the user can do about it.
The second msgid that named candidate modes went with it. It could only suggest
a mode whose primary is among the routed heads, and every mode on the printers
this fires for declares 0:P, so it had nothing to offer.
Blended filaments now return before that check rather than falling through it.
A blend is mixed at the nozzle by its component toolheads, and a parallel mode
is already using those toolheads to print copies or mirrors, so the two cannot
run at once regardless of where the components route -- including when a
component sits on the declared primary. Reaching the routing rule would also
have described them wrongly: mixed slots sit past the end of
physical_extruder_map, so they resolve to no head and read as merely unrouted.
Keeps the empty-list guard the shortening first dropped. validate() reads the
raw physical_extruder_map, whose registered default is a single entry, so a
profile that declares IMEX modes without authoring a map leaves every slot past
the first outside it -- and the sentence ended in a dangling "on .".
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings the upstream color-mixing feature and its follow-ups onto the branch so the
IMEX placement and primary-routing checks are built and tested against them for the
first time.
Merged clean, no conflicts. Not yet exercised together: a mixed filament is a virtual
slot no nozzle carries, while physical_extruder_map routes logical slots to physical
heads, so the IMEX pem lookups have no defined answer for one. Print::extruders()
lists mixed slots under their own id while tool_ordering.all_extruders() lists them
post-expansion, and the IMEX code reads both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The IMEX primary tool prints the sliced paths directly, so it can only load a
filament that physical_extruder_map routes to it. The ghost filament picker
enforces that for the secondary tools -- it offers only lanes whose pem entry
equals that head -- but the primary's filament comes from the ordinary object
filament selector, which has no IMEX awareness. Nothing detected the mismatch:
collect_imex_warnings() computes the same condition and discards it into a
display fallback, and the multi-color rule never examines it.
Block it in Print::validate() via the existing imex_primary_tool_for_mode and
imex_primary_logical_from_objects helpers. The message names the declared
primary, the heads the plate's filaments actually live on, and any configured
modes whose primary would work, and carries the object so the notification can
offer a jump to it.
Blocks rather than warns, matching the multi-color rule: the plate is not
printable as configured, and where the routed head is also absent from the
mode's active tools the 1st->2nd layer temperature branch skips it too, leaving
that head at its initial-layer temperature for the whole job.
The multi-color check now runs first. Its constraints -- an MMU manifold sharing
one head, a single-gantry mode -- cannot be fixed by switching mode, so the more
specific error should win rather than be masked by routing advice that leads
straight back to it. The extruders().size() > 1 gate moved onto that call, since
the routing check must also see single-filament plates, which is its common case.
The copy-mode guard-rail test printed on a filament routed off the primary, so
it asserted a plate this rule now refuses; retargeted to a well-formed plate.
Its replacement pins the object's own extruder, because ModelVolume reports its
extruder_id and would otherwise put a primary-routed slot on the plate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Upstream replaced MainFrame's fixed-index TabPosition enum with string-based
page ids ("feat: refactor notebook/tabs to be string based instead of fixed
index based"). The IMEX toolhead-visibility menu item was the only consumer of
that enum left on this branch, so its enable check now compares
m_tabpanel->GetSelectedPageName() against TAB_ID_PREVIEW -- the same form the
neighbouring upstream menu items use.
That mismatch is what broke CI: the branch built on its own, but the merge
commit CI builds no longer had TabPosition declared. No other conflicts.
666/666 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
- Emit coincident belt_brim_by_layer bands even when the leading object layer
has no InstanceVisit (zero-extrusion lead-in / no coinciding support), so the
brim at first belt contact is no longer dropped.
- Register each coincident band's brim filament in ToolOrdering and emit each
band exactly once, in its brim-filament pass; emit ordinary-layer aprons in
the brim pass before object extrusion (correct tool, brim-first) instead of
with whatever tool was active.
- has_belt_brim(): inner-only brims need brim_width>0 (leading/extra produce no
inner geometry), fixing spurious prime-tower/spiral rejection; mirror in
wants_brim. Single-extruder/single-object output is unchanged except
previously-dropped bands now print.
