Eleven commits, including a typed-config G-code export speedup, a printer agent
refactor that generalizes the infrastructure beyond Bambu, gyroid optimization,
and three CLI crash fixes.
One conflict, in PrintConfig.cpp. Upstream introduced a new_def macro and began
migrating the placeholder table onto it, adding curr_bed_type that way in the
same block where this branch had added imex_mode, imex_mode_index and
imex_mode_gcode in the older def = this->add(...) form. Both sides are kept and
ours are converted to the macro, which expands to the same three statements and
wraps label and tooltip in L() exactly as before, so nothing changes about what
is registered or what is translatable.
Note for anyone building this branch: the agent refactor adds a dependency,
LibDataChannel, so the deps tree needs dep_DataChannel built before the app will
configure. A distribution package of the same name will be found first if one is
installed, and the resulting error names a missing RelWithDebInfo location
rather than the wrong package, so point LibDataChannel_DIR at the dependency
prefix if that happens.
Verified: 789 targets build clean under -Werror, and the Release suite passes
1665 of 1665, up from 1630 before the merge -- the 35 new cases arrived with it
and all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in upstream/belt-printer (the Sept 14 main merge) plus Hanif Koh's
21 review-fix commits from PR #15685, on top of the MachineKinematics
refactor and the purge-prism / tree-support / first-layer-speed fixes.
Conflict resolution:
- BeltGCodeWriter is gone (kinematics refactor), so Hanif's plate-offset
fix for it is ported into GCodeWriter: the first-layer-plane checks in
travel_to_xy / travel_to_xyz / _travel_to_z now evaluate the plate-local
point, and BeltGCode::init_belt_writer hands the stored plate origin to
the writer it installs.
- init_belt_writer(Print&) takes Hanif's signature; the BBL flag is set on
the surviving writer by GCode::_do_export.
- The shared emit_belt_brim_bands() loop keeps the BeltFloorObjectGuard the
local branch added, so apron bands classify first-layer height against
their own object.
- eager_lift keeps effective_type: it now carries set_force_normal_lift().
- GCodeWriter's initializer list follows Hanif's member order with
m_kinematics in its declared position.
- TreeSupport::detect_overhangs uses Hanif's clamped build_plate_tilt_slope()
for the non-belt path and the belt shear for the belt path.
Fan speeds, multi-tool ramming, the tower interface and flush temperature
fallbacks and the custom G-code placeholders now use the extruder variant a
filament prints with on each layer, instead of reading by filament id.
main moved the CAD docs into docs/HLSD/design-tab.md and the offer
generator and atlas into scripts/CAD/ (#15803).
- The four docs this branch had edited are deleted as on main. What the
branch changes about the design goes into the HLSD doc: the right-click
is judged by drift over the whole press, with no time budget; a Text
feature stores its outlines as well as its string, font and height; a
new section on how the Design canvas renders bodies (studio lighting
through the shared phong shader, B-rep edge ribbons).
- gen_offer_table.py keeps both main's atlas validation and this
branch's L() markers on user-facing strings.
- The Text verb's hint is now changed in scripts/CAD/tool_atlas.json as
well, so `gen_offer_table.py --check` passes.
- DesignPanel.cpp keeps the DesignTextDialog include and main's new
path in the offer comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
OrcaSlicer#16019's Windows unit-test jobs failed on one test, "Hole
standards: ... 82° countersink": CTest passes the test name to Catch on
the command line, the ° arrives in the ANSI code page, the filter
matches no test and the run counts as failed ("No test cases matched",
"No tests ran"). The name now says "82 degree"; it was the only test
name in the suite outside ASCII.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
Refinement now tapers off away from the paint, and the unpainted surface is kept out of
simplification, so what one bake leaves unpainted is still the model's own triangles when a later
bake paints there. A second bake used to refine the slivers and long triangles the first one left
around its stroke, and came out many times denser, with walls off the texture's lines.
Once the budget is met the progress fraction stops moving, and a cancel was only checked when it
moved, so Cancel did nothing until the flat-face merging finished. It is now also checked every 16k
steps.
Meeting the triangle budget by merging flat faces alone no longer raises the warning, and the
warning now quotes the budget instead of the triangle count left after the flat faces were merged.
* Fill Settings Missing From a CLI Project From Its System Presets
A project saved before a printer or process option existed has no value
for it. The GUI takes such keys from the project's system preset; the
CLI left them at the option default, so e.g. extruder_clearance_dist_to_rod
sliced as 40 instead of the P1S's 33.
The CLI now resolves the project's system printer and process presets by
name and copies the keys the project lacks, skipping preset bookkeeping,
print-host keys, the extruder variant layout and keys the legacy handler
drops. PresetBundle::resolve_system_preset finds the vendor through its
manifest or preset cache, so it also works in release builds, which ship
vendors as caches only.
* Load a CLI Project's Printer and Process Settings as the GUI Does
The CLI filled only the keys a project lacked from its system preset.
The GUI builds a project preset differently: the project's values go
over the default preset, without the print-host keys, and every key
the project does not list in different_settings_to_system is refreshed
to its base system preset's current value. After a profile update the
two sliced the same project differently.
That step now lives in Preset::load_external_config, which takes plain
configs and gets the base preset from a callback, so the collection
lookup stays in PresetCollection. PresetBundle::project_different_keys
builds the kept-key set from a project's escaped entry, adding the
preset bookkeeping keys, and is used by both the GUI and the CLI.
PresetCollection::load_external_preset calls the shared step with no
change in behaviour.
The CLI now builds the project's printer and process configs with the
same step, passing the system preset from resolve_system_preset. That
drops the hand-kept skip list for print-host and variant-layout keys
and the legacy-key check: the shared step already excludes print-host
keys and maps per-variant values onto the base preset's variant layout.
The --uptodate path and a printer or process given on the command line
are left as they were.
Because the GUI's kept-key set always holds the bookkeeping keys, the
refresh runs for every project that names a system preset, so the CLI
now loads that preset's vendor on every such run.
Reported: the Revolve axis could only be the sketch plane's X or Y axis
through its origin, so a half-profile drawn beside a centerline, the
usual way, could not be revolved about that centerline.
- CadFeature::revolve_axis_entity names a Line of the profile sketch to
revolve about (a construction centerline, or an edge of the profile
itself); -1 keeps revolve_axis. Appended at the end of the framed
recipe, so existing projects load and rebuild unchanged. Revolve and
Surface Revolve resolve their axis in one place (revolve_axis_of); an
index that no longer names a line fails with a reason.
- SketchEngine::make_revolve takes the world axis. A profile with points
on both sides of it is refused with "the profile crosses the revolve
axis"; MakeRevol failed there with no reason.
- The Axis list of both cards reads Plane X, Plane Y, then every line of
the sketch, named as the constraint list names them (Centerline E4,
Line E3). A fresh revolve preselects the sketch's centerline when it
has exactly one. The gizmo turns about the chosen axis and draws it
dashed; construction lines no longer pull its centre.
Tests: a rectangle beside a construction centerline revolves into the
tube of the expected volume along that line; about its own edge, into a
cylinder; an axis through it is refused with the reason; a stale axis
index fails with a reason; the axis survives save and load. The
truncated-recipe test accounts for the new tail field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
Reported: once extruded, a part is hard to read; the lighting says
little about its shape. Both lights of the object shaders sit near the
camera, so the sides of a part come out in almost the same tone, and
nothing marks where one face ends and the next begins.
- The phong shader gains a studio lighting model, chosen by a new
lighting_model uniform: a sky/ground hemisphere in world space (up
faces cool and bright, down faces warm and dark), a key light from the
upper left and a weak fill from the right, a plastic-like highlight,
and a darker base with a faint sheen toward the silhouette so curved
faces read as round. GLCanvas3D::set_studio_lighting() makes a canvas
draw its objects with it whatever the realistic-view preferences; only
the Design canvas turns it on. Every canvas sets the uniform on each
use, 0 for the slicer's, so they render as before.
- Every B-rep edge of a body is drawn as a thin dark line over it, depth
tested and pulled a few pixels toward the eye so it wins against the
faces meeting at it and hides behind the faces in front. The seam of a
closed surface and degenerate edges are left out
(GeometryEngine::display_edges). Edges are sampled once per shape and
kept across recomputes that leave a body unchanged; bodies faded by
body focus get fainter edges, and a dress-up previewing its result
alone hides them with the bodies.
Tests: display_edges gives a box its 12 edges at their lengths, a
cylinder its two round rims without the seam, a cone its base rim
without the seam or the apex.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
Reported on the rig: Text showed no preview where it would go, its
dialog was pinned over the middle of the window (GNOME attaches a modal
dialog to its parent and it cannot be moved), and once confirmed the
text could not be edited and did not appear in the feature tree. Inside
an open sketch it became loose lines of that sketch.
- Text is always a feature, "Text N" in the tree. A new text goes on the
plane of the open sketch (committed first when it holds anything,
closed when it is empty), else centred on the picked face, else on the
reference plane.
- The dialog is modeless and opens at the top right of the window. The
feature is created at the first character and redrawn on every change,
so the text appears in the view where it will be as it is typed. Enter
inserts it, then the usual move/scale gizmo and Confirm; Esc, Cancel or
closing the dialog takes it out again (undo to the checkpoint taken
when it appeared).
- CadFeature keeps text_string, text_font (the WxFontUtils descriptor)
and text_height, appended at the end of the framed recipe. Editing a
Text feature reopens the dialog with them and redraws the outline in
place, keeping its placement. The outlines are still saved, so the
project opens the same on a machine without that font.
- The MCP control refuses writes while the Text dialog is open.
Tests: the text parameters survive a save and load along with the
outline; the truncated-recipe test accounts for the new tail fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
A sketch drawn on the rig extruded to walls with no caps. Every joint of
its loop met, so the loop analysis called it closed and MakeFace
accepted it, but the loop crossed itself: an arc left the top line's end
heading back over it and crossed it again 2.5 mm on. A second arc left a
0.28 mm line tangent to it but the other way, a cusp. The prism of that
face is an invalid solid, and it was shipped as a body.
- SketchEngine::wires_to_face checks the face it builds and, when OCCT
calls it invalid, fails with "the profile crosses or folds back on
itself, so it does not bound one region". The extrude reports that
instead of producing the broken body.
- sketch_loop_defect() judges a closed loop of lines and arcs exactly:
any contact between two of its entities away from the joints they
share, or a joint where the curve turns straight back (a cusp; OCCT
still builds that one, but it is never what was meant). It returns the
point.
- The sketch uses it on every region: the loop is tinted red, the point
gets a marker, and the status line says what the red means the first
time one appears. The MCP loop report lists the defects and no longer
calls such a profile buildable.
Tests: the rig's profile, with each defect and with both, from a
recording of the real entities. The analysis names the cusp at its joint
and the crossing on the top line, in either traversal order, and
passes ordinary tangent and collinear joints. The extrude refuses every
crossing variant with the reason, and the same arcs swept the other way
round extrude to a valid solid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
A solid edge could only be picked one at a time, and Fillet/Chamfer took
either that one edge or a whole face group. Rounding three chosen edges
meant three features, whose edge ids each resolve against a body the
previous one had already changed.
- Shift+click (or Ctrl+click) on an edge of the body already picked adds
it to the selection, or removes it; the same modifiers that extend a
sketch selection. The whole set is highlighted. A plain click replaces
it, as before.
- Fillet/Chamfer dresses every picked edge in ONE feature at one size,
all ids resolved against the same body. The card says "3 edges", the
status line and the offer header name the count.
- CadFeature gains dressup_edges, appended at the end of the framed
recipe, so existing projects load and rebuild unchanged. dressup_edge
keeps the first edge, so an older build opening a newer project still
dresses that edge instead of falling back to the face group.
- The MCP fillet/chamfer verbs take `edge` as one id or an array.
Tests: a fillet on the four picked top edges equals the Top face group
exactly; the list survives save/load; two opposite chamfers remove
exactly twice one; a missing id fails with a reason. The truncated-
recipe test accounts for the new tail field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
- Offer table: user-facing strings carry the L() marker so xgettext
extracts them; DesignOffer.hpp, DesignSketchTool.cpp and
SketchInlineEditor.cpp are listed in localization/i18n/list.txt.
- Offer: model-mode Constrain sits in the same row as the sketch one;
Interference is wired; Rib shows its R key; a verb that accepts the
selection but is blocked by the document stays greyed with its reason
instead of vanishing from the submenu; one refusal wording per verb.
- Extrude infers Join when the profile touches a solid (new
CadDocument::body_touching_sketch) and on face push/pull; New body in
free space. Revolve/Sweep/Loft/Boolean use the same result words.
- Interference and volume/area reports go to the status line in mm3/mm2
instead of modal dialogs; Delete Body no longer asks (it is undoable).
- New feature names match the card header ("Extrude 3"), translated;
"Coordinate system", "Angle (°)", center/color spelling, translated
face and length readouts, slot hints say width.
- CAD gizmos in Prepare are selectable only with the CAD feature on; the
sketch auto-close setting is stored per design.
- Docs: confirm/cancel rules, enabling the feature and MCP in
design_tab.md; drift-only right-click in interaction-model.md; the
portability note rewritten to describe the integration as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
Sketch layer
- Trim/extend of an arc (and a circle opened into an arc) rewrites p0/p1 from the new angles;
the wire builder, the solver and snapping read them.
- Tangency binds the arc end that touches the line (or the other arc) instead of always the
start, so a fillet tangent to both legs solves; circle-circle / circle-arc tangency uses the
centre distance instead of CURVE_CURVE_TANGENT, which aborts on a circle.
- Point-on-line distances and circle-line tangency keep the side the geometry is on; a point
on an arc's rim uses PT_ON_CIRCLE.
- The partitioned solve keeps constraints onto the origin/axes and counts free entities' DOF.
- Zero-radius circles get no solver primitive and build no wire; constraints the solver cannot
apply are reported in SketchSolveResult::skipped.
- EllipseArc: mirror no longer yields the complement; after a solve its angles and ends are
re-derived; on the XZ plane it is no longer built mirrored.
- Offset: a circle follows the "+d = left of travel" rule (it shrinks, like a CCW arc chain);
chains are joined at the weld tolerance. Bridge end pole fixed (G1, no cusp). Negative-scale
transforms keep arcs and ellipses on their ends. Inference tolerances aligned with the weld.
Model layer
- Body references follow the body across delete / reorder / hide (resolved by the feature
that made it); datum-plane ordinals are re-pointed; an index past the end is an error, not
"the last body". New set_feature_enabled(). A move that puts a consumer above its input is
refused.
- Threads made from now on read thread_radius as the nominal major radius (internal: bore to
minor, groove to major; external: groove cut into the rod); older recipes build as before.
Bad thread parameters say why. Circular patterns span their angle end to end (new ones);
add_pattern pivots on the modeling origin.
- clear() drops variables; expression fields the GUI offers are bindable (thread_diameter,
helix_*, thicken_thickness, ...); deg()/rad() in expressions; the recipe saves the modeling
origin and body colours; names/colours follow bodies by identity.
- Boolean and dress-up failures throw instead of returning the input; one produces_body();
hole standards corrected (82° inch countersinks, UNC names, #10-24); legacy profile solve
validates indices and writes back only on success; v4 recipes read with a frozen field list.
Tests cover each of the above.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
Include variant-aware validation, temperature and pressure controls, named nozzle selection, and filament sidebar refresh.
Co-authored-by: Codex <codex@openai.com>
Upstream moved pressure advance onto the extruder variant: enable_pressure_advance,
pressure_advance and the four adaptive keys joined filament_options_with_variant,
the repeated inline blocks in set_extruder() became a helper, and the lookups
moved from the filament id to get_filament_config_index().
All three conflicts were the same collision, because this branch had modified two
of those same inline blocks to pass a tool qualifier so each carriage is addressed
explicitly in parallel modes. Taking either side whole would have lost something:
upstream's drops the qualifier and leaves parallel carriages with no pressure
advance, ours drops the per-variant indexing and reads the wrong column on a
multi-variant printer. The helper now takes an optional tool, defaulting to -1,
which omits the qualifier. imex_pem_tool_for() already returns -1 off IMEX and in
primary mode, so non-IMEX output is unchanged, and the three call sites that never
passed a tool keep upstream's behavior exactly.
The third conflict was two test cases appended at the same place. Both are kept.
Separately, one defect that merged cleanly and so was not flagged: the loop that
emits pressure advance for secondary carriages at the start of a print still
bounded and indexed those vectors with a raw filament id. They are variant
expanded now, so their length is columns rather than filament slots -- the value
read was the wrong column, and the bound no longer sat in slot space, letting an
out-of-slot filament through. It now bounds on filament_diameter and translates
with get_filament_config_index(), which is what the sibling second-layer
temperature loop already does.
Verified: both changed translation units compile clean under -Werror. The merge
was resolved independently twice and the two resolutions agree on every line of
code. Not yet run: the Release test suite and a parallel-mode slice sweep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
load_obj emits the second triangle of a quad from corners 0, 2 and 3,
but read its texture coordinates from corners 0, 1 and 2, so half of
every textured quad sampled the wrong part of the texture. The corner
indices are now passed down to where the coordinates are read.
A mesh with inward-facing triangles is flipped after loading, which
swaps corners 1 and 2 of every face. The texture coordinates were left
as they were. They are now swapped along with the corners.
* Escape Project Metadata in the Project Page and Restrict Accessory Opening
The Project page rendered the model and profile name, author, description
and accessory file names from the 3MF as live HTML. Names, authors and file
names are now set as text, and the file list is built from DOM nodes with
bound click handlers instead of concatenated markup. Descriptions can
legitimately carry rich-text HTML, so they are rebuilt from an inert
DOMParser document, keeping only plain formatting tags, http(s) links and
http(s) images, with every other attribute dropped.
Opening an accessory from the page now only launches regular files that
lie inside the project's extracted auxiliary directory. The containment
check is a new libslic3r helper, is_absolute_path_within_root, built on
is_path_within_root so symlinks leading out of the root are rejected too.
* Tighten Project Page Description Rendering and Keep More Formatting
Link and image URLs in descriptions must now start with an http or https
scheme as written and parse as such with the URL parser. Preview images are
built as DOM nodes like the file list, and accessory names show their full
text as a tooltip.
Descriptions keep more plain formatting: del, ins, figure, figcaption, dl,
dt, dd, caption, q, abbr, kbd and wbr, plus alt, title, width and height on
images, colspan and rowspan on table cells and start on ordered lists.
Numeric attributes must be plain integers. Embedded YouTube players become
a link to the video.
* Confirm Before Opening Program Attachments and Load Only HTTPS Images
Opening a project attachment whose type runs as a program or script
(executables, installers, shortcuts, shell and PowerShell scripts, macOS
command files and apps, Linux desktop entries) now asks for confirmation
first. The check lives in libslic3r as is_executable_file_name and ignores
the trailing dots and spaces Windows strips from file names.
Images in project descriptions are kept only when they load over https,
so opening the Project tab no longer issues plain-http requests.
* Open Project Attachments Through One Guarded Helper
The Edit Project Info view launched attachments directly, without the
checks the project page has. Both now call
desktop_open_project_attachment, which checks that the file is inside
the auxiliary directory, asks for confirmation where needed and then
opens it.
The auxiliary root was built through encode_path, which returns code
page bytes on Windows, while boost::filesystem reads a narrow string as
UTF-8. With a non-ASCII temporary directory the root never matched and
no attachment opened. It is now built from the UTF-8 path directly.
The list of program extensions could not be kept complete and let
unknown types open without a prompt. It is replaced by
is_safe_to_open_file_name, a list of plain document, image, model and
video types that open directly. Everything else asks first.
* Confine Updater Archive Extraction to the Target Directory
The preset updater extracted downloaded archives by appending each entry
name to the cache directory, and the network plugin installer did the same
for the plugin folder, without checking that the result stays inside it.
Move the updater's extraction into libslic3r as extract_archive_confined,
which validates every entry with is_path_within_root before writing
anything and fails the whole archive if one entry resolves outside the
target. The plugin installer now rejects such an entry the same way. Well
formed archives extract exactly as before.
* Harden Archive Extraction Against Symlinks
The plugin installer now creates a symlink entry only when its target is
relative and, joined to the link's own directory, passes
is_path_within_root, via the new is_symlink_target_within_root helper.
Before writing any entry it checks the destination with symlink_status, so
an existing symlink, dangling or not, is replaced rather than followed, and
it creates parent directories inside the existing error handling.
extract_archive_confined replaces a symlink at a destination file the same
way.
is_path_within_root now ignores a trailing separator on the root, which
previously made every path fail the check.
* Validate Plugin Symlink Targets Before Replacing Existing Files
A symlink entry's target is now read and checked before anything already
at its destination is removed or renamed aside, so an archive rejected
for its link target leaves the installed plugin files in place.
* Reject Paths with an Embedded NUL When Confining Extraction
is_path_within_root compared each component with "..", so a name such
as "..\0" passed the check. The filesystem calls stop at the NUL and
act on a shorter path than the one that was checked: a symlink target
read from a plugin archive as raw bytes was created as "..", pointing
out of the plugin directory.
A path containing a NUL is now rejected before anything touches the
filesystem, which covers every caller, including entry names taken from
the Unicode Path extra field.
Support variant-specific cooling, pressure advance, purge, ramming and temperature ranges. Keep shared U1 values as singletons and verify element-zero fallback for missing variant entries. Preserve preset migration aliases and validate high-flow selections using their declared nozzle volumes.
Co-authored-by: Codex <codex@openai.com>
Pressure advance, adaptive pressure advance and its model can now take a
different value for each extruder variant of a filament, such as Standard and
High Flow nozzles, like the other per-variant filament settings. Projects
saved with one value per filament apply it to every variant of that filament,
and the addnorth BBL filaments in the Orca Filament Library are updated to the
per-variant layout.
Brings in nine commits, including stricter slice validation of custom G-code and
filename formats across system profiles, OBJ and DRC import hardening, and the
Ender-3 V3 SE extrusion mode fix. None of them touch the files this branch
changes.
They stand on their own: nothing in the texture displacement feature
calls them, and nothing in them knows about textures. Reviewing a
slicer-wide parallelization next to a new gizmo helped neither.
They now live in perf/slicing-optimizations, based on current main.
* Validate OBJ Texture-Coordinate Indices
load_obj read the texture coordinates of a face without checking the
vt index, so a face referencing a vt past the end of the list read out
of bounds and crashed, and a face vertex with no vt read index -1.
Out-of-range or missing indices now fall back to a zero UV. The face
keeps its entry in the per-face UV list, so the following faces stay
aligned, and the geometry loads as before.
Negative (relative) vt indices were also rebased by dividing the float
count by 3, but each vt stores two floats.
* Reject DRC Meshes Without Positions or with Invalid Face Indices
load_drc dereferenced the POSITION attribute without checking that the
mesh has one, and trusted the decoded face indices, which the Draco
decoder does not check against the point count. Both now fail the load
cleanly. A failed vertex conversion is treated the same way.
The libslic3r tests link Draco so they can encode the malformed meshes
in-test.
* Keep OBJ Texture Coordinates That Carry a W Component
The vt parser stopped reading the optional third component when texture
coordinates were cut down to u and v, but the check that nothing is left
on the line stayed. A legal "vt u v w" line was therefore rejected and
silently dropped, shifting every later texture index. The w component is
parsed again and discarded.
The texture coordinate stride is now a named constant, OBJ_TEXCOORD_LENGTH,
used by the parser and the importer, so the relative-index rebase cannot
drift from the storage layout again.
# Description
Follow-up to #15950, where a `filename_format` using
`initial_no_support_extruder` shipped broken because the profile
validator's slice sweep never expands `filename_format`. The sweep now
expands every custom G-code and `filename_format` text shipped in any
system profile. Each printer's slice also fires the pause, template
custom G-code and clumping-detection hooks and names the output file,
and the first printer shipping a `printing_by_object_gcode` also slices
by object. Beyond each printer's default process and filament, every
compatible system process and filament carrying a template text no
earlier slice has expanded is sliced once, which takes the sweep from
1,110 to 1,248 slices (about 49 s locally, up from 43 s). While the
sweep runs, the placeholder parser also resolves variable names inside
`{if}` branches a slice does not take, so one expansion checks every
branch.
The stricter sweep found two profile bugs, fixed here: the Anycubic
Kobra X filament change G-code carried an unreachable block reading
variables only Anycubic's own slicer defines, and the Wanhao France D12
template custom G-code had an unterminated `{if}`, so adding a template
custom G-code on those printers failed the slice. It also fixes a parser
bug where a declaration such as `{local a = layer_height + 1}` failed to
parse inside a branch that is not taken.
No change to slicing output for templates that already worked: the
untaken-branch check is enabled only by the validator's slice mode, and
the parser fix only lets previously rejected templates parse.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
New placeholder-parser cases cover the parse fix and the untaken-branch
check: off by default it changes nothing; on, it rejects undefined names
in branches not taken, accepts names declared there, and leaves boolean
expressions (compatibility conditions) alone. The full sweep passes on
all system profiles, and planting an undefined variable in an untaken
branch of a printer's start G-code, of a non-default filament's start
G-code or of a non-default process's `filename_format`, or reverting
#15950, each fails it and names the preset. `scripts/check_profile.sh`,
`libslic3r_tests` and `fff_print_tests` pass.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
The 3MF importers read XML entries into a single expat buffer whose size is
an int, while the archive extraction used the entry's 64-bit declared size.
The two could disagree for entries declaring more than INT_MAX bytes.
Reject such entries before allocating, and use one size for the buffer, the
extraction and the parse. This applies to the BBS importer, the PrusaSlicer
importer and the PrusaSlicer fingerprint probe. The load now fails with an
error instead.
* Reject 3MF Plate IDs Below 1 Instead of Indexing Before the Plate List
The plate importer copied each plater_id from model_settings.config into the
1-based plate list after checking only the upper bound, so plater_id="0"
wrote to plate_data_list[-1] and crashed on load. Both copy sites now reject
ids below 1 with the same "invalid plate index" error already used for ids
past the end.
* Drop Malformed 3MF Paint Data Instead of Reading Past the Bitstream
Painted facets are decoded from a bitstream a nibble at a time with no bound
check, so a truncated or corrupt paint string in a 3MF (for example split
codes with no children behind them) read past the end and crashed on load and
slice. A one- or two-side split naming side 3 also indexed past the triangle's
vertices.
Every nibble read now goes through a bounds-checked reader. Loading validates
each triangle's tree and drops a malformed one with a warning, so the stored
data, used extruder states and later decoding all agree. deserialize() also
unwinds and clears any triangle whose tree is incomplete or malformed, and
has_facets() stops at a truncated triangle. Valid streams decode unchanged.
* Sanitize Server-Supplied Download File Names
The URL downloader used the file name from the Content-Disposition header
as given, without the cleaning and unused-name search applied to the
URL-derived name.
Reduce the header name to a sanitized base name with the new
sanitize_file_basename helper, which splits on both path separators and
rejects names made only of dots and spaces. Run the result through the
same unused-name search as the URL-derived name, now shared in
find_unused_filename, and fall back to the URL-derived name when nothing
usable remains.
* Sanitize Download Names Before Choosing an Unused One
The unused-name search probed the name as given and sanitized the
result afterwards, so a name whose special characters are replaced
could be mapped onto a file that already exists.
Move the search into libslic3r as find_unused_filename, sanitize first
and probe the name that is actually written. The download marker path
is shared through download_marker_path. Restore the last tried name in
the error reported when no free name is found, and cover the search
with unit tests.
* Keep Downloads on an Unused Name Until They Complete
When the server supplied the name, the download marker stayed under the
URL-derived name, so the adopted name was not reserved against other
downloads. The final rename also replaced any file that took the name
while the download ran.
Move the marker to the adopted name before any data is written, and
check the name again right before the final rename, picking the next
free name if it is taken by then.
* Sanitize the File Name of Model Import Links
The model import took the file name from the link as given and only
avoided an existing file with a substring match on the folder listing.
Reduce the name to a sanitized base name, falling back to untitled.3mf,
choose the name with the shared unused-name search, and check it again
before the final rename.
* Handle Filesystem Errors When Finishing a Model Import Download
Choosing the final name and moving the downloaded project into place
could throw from inside the download callback. Any such error now removes
the temporary file and reports the existing import failure message.
# Description
Extruder variants (Standard, High Flow, extra high flow) now work on any
printer. Any vendor profile can declare them, and a multi-variant
filament picks up the right variant on every printer. In the sidebar,
users can switch the printer variant and set the nozzle volume type of
each extruder on multi-extruder printers. This also fixes a later
filament printing at the first filament's temperature on a P1S or X1C
with a High Flow nozzle. The profile checks now reject variant arrays of
the wrong size and outdated variant strings. Every shipped vendor
profile passes them, and the orca-profiles skill documents the rules.
Slicing output changes only where the wrong variant was used before.
# Screenshots/Recordings/Graphs
<img width="393" height="218" alt="Screenshot 2026-09-28 at 11 28 07 PM"
src="https://github.com/user-attachments/assets/8bee4b0e-c38c-4039-8c11-096ace6fbad0"
/>
<img width="448" height="267" alt="Screenshot 2026-09-28 at 11 28 37 PM"
src="https://github.com/user-attachments/assets/e767cd97-a5d0-4728-b010-c8ea2bc94ca7"
/>
<img width="746" height="603" alt="Screenshot 2026-09-28 at 11 28 54 PM"
src="https://github.com/user-attachments/assets/23c8af3b-c679-46e5-9fd0-2e43df0449b3"
/>
https://github.com/user-attachments/assets/10d75d72-86a3-42e8-8a95-b1627bd58e91
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
