Removed, with the keys added to handle_legacy()'s ignore list so saved
profiles and 3MFs keep loading:
- belt_slice_rotation_global and preslice_remap_global. Both were only
consulted when belt_preslice_global ("Global mesh transforms") was off,
which no profile does; belt_preslice_global is now the single global
mode and is presumed on everywhere the old flags were ORed in
(PrintObjectSlice, BeltBackTransform, BeltGCode, Print::process,
PrintApply). The Belt tilt row is axis + angle only.
- preslice_remap_x/y/z. No profile used the pre-slice axis remap; the belt
tilt axis plus the G-code axis remap cover the machines that exist, and
its implementation only agreed with itself for a plain swap (matrix
columns vs remap_bbox rows). BeltTransformPipeline::build_preslice_remap,
remap_bbox and has_preslice_remap are gone, the forward transform is the
rotation, and the G-code header no longer carries the remap.
- belt_support_z_offset_mode. Saved and invalidated steps, but no support
generator read it.
- first_layer_plane and first_layer_plane_offset, with FirstLayerPlane.cpp.
On every shipped configuration the band is measured from the belt
surface (GCode::belt_height_above_floor) and the evaluator was only
reached for an explicit XY/YZ/XZ choice or a non-zero offset, which
nobody set. first_layer_plane_thickness stays as the band unit,
relabelled "First layer band thickness".
UI: the Machine frame transforms group is five single-option rows (G-code
remap X / Y / Z, Decouple machine-frame tilt, Machine-frame tilt angle;
the angle row is shown only when decoupled) instead of two multi-column
lines, and the remap fields carry full labels.
Also carries the phong.fs struct fix from #16226 so the worktree build
links its shaders.
libslic3r_tests and fff_print_tests pass; clang-tidy diff check clean;
orca_profile_tool.py check clean.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
On a belt printer a lift is a move along the belt axis (0.4 mm / sin 45 =
0.57 mm of belt travel out and back on every hop), not a lift away from the
part. The three belt printer bases now ship z_hop 0, the IR3 V2 leaf no
longer restates 0.4, and the BabyBelt Pro and IR3 V2 filaments stop
overriding the printer with filament_z_hop 0.4. The option stays editable.
The belt-printer branch is failing two profile gates. Both stem from the
three belt-only vendors (Custom's generic belt printer, IdeaFormer,
Printcepts) not existing upstream, so upstream maintenance passed them by.
Slice check: 4 of 1015 printers failed - Custom's MyBeltPrinter 0.2/0.4/
0.6/0.8 nozzle all fell back to "Default Setting". No process profile in
the Custom vendor listed any MyBeltPrinter in compatible_printers, and
Custom's fdm_belt_common pointed default_print_profile at
"0.20mm Standard @System", which does not exist in that vendor's index,
so the generic belt printer had no usable process at all. This gap dates
to when MyBeltPrinter was added (2026-04-07); it only started failing now
because the slice-check job is newer than that.
Adds two process profiles modelled on the sibling @MyKlipper ones:
- 0.20mm Standard @MyBeltPrinter - 0.4/0.6/0.8 nozzles
- 0.12mm Fine @MyBeltPrinter - 0.2/0.4 nozzles
The split is forced by hardware: the 0.2 nozzle preset caps
max_layer_height at 0.16, so a single 0.20mm profile cannot legally cover
it. fdm_belt_common now defaults to the standard profile and the 0.2
nozzle preset overrides to the fine one.
setting_id: 14 files failed the rules introduced in #14432. That
migration renumbered 7425 files across 61 vendors but skipped these three,
leaving BabyBelt Pro, IdeaFormer IR3 V2 and MyBeltPrinter squatting the
"G*" id space reserved for Bambu (GMPC0BBP01, GMIF001, GM_BELT_00x) and
four instantiated filament/process presets carrying no setting_id at all.
Regenerated with scripts/assign_vendor_setting_ids.py.
Also repoints the identical dangling "0.20mm Standard @System" in
Printcepts' and IdeaFormer's fdm_belt_common at their own real process
profiles. That is a no-op today because both concrete printers override
it, but it is the same landmine that took out MyBeltPrinter.
Vendor index versions bumped so check_installed_vendor_profiles() will
re-install the corrected profiles over an existing install.
Note: changing a shipped preset's setting_id can orphan user presets that
reference it as base_id. #14432 accepted that tradeoff for 61 vendors;
this keeps these three consistent with the rest.
Verified: orca_extra_profile_check.py reports 0 errors across 66 vendors
(was 14 files with errors), and OrcaSlicer_profile_validator -s slices all
1015 printer presets successfully (was 4 failures).
