GLGizmoSlaSupports, GLGizmoHollow, GLGizmoFaceDetector, GLGizmoText and GLGizmoAdvancedCut were already left out of the build, and GLGizmos.hpp, the only header including some of them, had no includers. VoxelizeCSGMesh.hpp uses types that no longer exist, SLA/bicubic.h does not compile, and Utils/ProfileDescription.hpp is included nowhere. Their CMake and gettext source-list entries go with them.
Five commits: a section view for the 3D canvas, a faster G-code preview, user
preset values kept on extruder variants they don't list, debug build CMake
fixes, and a 30 minute timeout on macOS notarization.
Two conflicts, both in GLCanvas3D. The header's were neighboring
declarations, kept from both sides. In the transparent pass, the section view
removed the assemble view's painter block that followed our ghost render;
the ghost render stays where it was, at the end of that pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Text opens a dialog instead of a bare text entry: any installed font
(bold, italic), the height in mm, and a live outline of exactly what
will be inserted with its size. Enter inserts, Esc cancels; the last
font and height are remembered. text_to_regions gains an overload
taking a loaded font.
- The offer menu opens with a greyed title naming what the rows act on
("Flat face 4 of Body 2", "Sketch line", "Nothing selected").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
- Offer table: user-facing strings carry the L() marker so xgettext
extracts them; DesignOffer.hpp, DesignSketchTool.cpp and
SketchInlineEditor.cpp are listed in localization/i18n/list.txt.
- Offer: model-mode Constrain sits in the same row as the sketch one;
Interference is wired; Rib shows its R key; a verb that accepts the
selection but is blocked by the document stays greyed with its reason
instead of vanishing from the submenu; one refusal wording per verb.
- Extrude infers Join when the profile touches a solid (new
CadDocument::body_touching_sketch) and on face push/pull; New body in
free space. Revolve/Sweep/Loft/Boolean use the same result words.
- Interference and volume/area reports go to the status line in mm3/mm2
instead of modal dialogs; Delete Body no longer asks (it is undoable).
- New feature names match the card header ("Extrude 3"), translated;
"Coordinate system", "Angle (°)", center/color spelling, translated
face and length readouts, slot hints say width.
- CAD gizmos in Prepare are selectable only with the CAD feature on; the
sketch auto-close setting is stored per design.
- Docs: confirm/cancel rules, enabling the feature and MCP in
design_tab.md; drift-only right-click in interaction-model.md; the
portability note rewritten to describe the integration as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
* Add Ultimaker S5 Profile - WIP
* Add Ultimaker physical printer base
* Ultimaker API WIP for base update.
* Fix undefined reference error.
* Add UMS5 profile, add placeholders for testAuth stuff.
* Fix non-const func definitions, make func names align with style guide.
* Localization stuff? IDK if this does anything or is required.
* Add cover image
* Auth code cleanup, add UI button for auth cred generation, implement various auth checks and tests.
* Fix auth stuff
* Clean up code
* Get upload code sort-of working, fix typo
* Update printer settings and start/end gcodes
* Add makeGriffinCompatible preprocessor script to prevent machine crash, update machine profile.
* Fix buildplate size, fix time missing bug, add S5 buildplate model
* Correct capitalization to UltiMaker
* Fix display bug, fix capitalization bug
* Implement credential generation button and logic
* Fix generate auth creds button, add todos, fix capitalization.
* Actually fix generate auth credentials.
* Fix generate auth creds message.
* Update UM S5 machine limits
* Revert accidental commit.
* Fix postprocessor, clean up code.
* Update presets for multi-extruder printing.
* Add Single Extruder and Fast profiles.
* Code cleanup
* Register and validate the UltiMaker S5 presets
* Show the Generate API Key button only for UltiMaker print hosts
The PR added it to the Physical Printer dialog for every host type, where pressing it runs an ordinary connection test and reports "API Key created". Gate it on the selected host type instead.
* Drop unused lambda captures in the UltiMaker host code
clang promotes -Wunused-lambda-capture to an error under the project's -Werror, so the file failed to build on macOS; the five callbacks do not touch this.
* Fix the Windows build of the UltiMaker print host
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Review findings on the preceding commit, plus one defect it should have
caught.
- The IDEX/IQEX pressure-advance loop fed resolve_filament_for_head()'s
result straight into enable_pressure_advance and pressure_advance. That
result is bounded by physical_extruder_map, which holds one entry per
NOZZLE, while both options are indexed per filament SLOT. On a printer
with more nozzles than the project has filaments the two spaces diverge
and get_at() clamped the overflow onto filament 0, emitting its pressure
advance on a secondary carriage. The second-layer temperature loop bounds the
same lookup, but against nozzle_temperature, which is variant-expanded and so
is not the slot count either -- it is not the precedent it looks like.
IMEXHelpers.hpp states the rule
once, and a test pins the contract that makes the bound necessary:
resolve_filament_for_head() answers in nozzle space, so a non-negative
result is not by itself safe to use as a filament id.
- The header claimed every caller renders a -1 tool qualifier as "emit
none". RepRapFirmware substitutes the historical D0 instead, deliberately
and with its own comment in GCodeWriter. Say so, rather than leaving a
contract a future author would code against.
- A cross-reference pointed at a hard-coded line number that the preceding
commit had itself shifted by nine lines. Name the function instead.
- The multi-color rejection reasons reach the user through Print::validate()
as raw English, while the returns on either side of them use L(). Wrap
them and register IMEXHelpers.cpp for extraction. They also still said
"IMEX", the internal name, so they move to IDEX/IQEX with the rest of the
user-facing strings rather than shipping the internal one to translators.
- Trim the preceding commit's comments. One block explained the same
clamping hazard six times; the canonical explanation now lives in
IMEXHelpers.hpp and the call sites point at it. The mode grid carried
twelve lines of commentary and no code, most of it archaeology already in
the commit message, and one claim about the modes editor that was not
true. The ArrangeJob threading note stays: it documents an invariant that
cannot be recovered from the code.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review findings on the IDEX/IQEX parallel printing code, all in paths the
feature owns.
- physical_extruder_map lookups used ConfigOptionVector::get_at(), which
clamps an out-of-range index to values.front() rather than reporting a
miss. The map holds one entry per nozzle while filament ids index slots,
and nothing caps the slot count at the nozzle count, so a project authored
with more filaments than the printer has extruders silently addressed the
primary's head: pressure advance pinned to the wrong carriage, and
skip-primary loops suppressing whichever head sat at pem[0]. Bounds-check
at all four sites and treat the miss as "no mapping" (-1). Covered by a new
imex_pem_tool_for test; the header note now warns against get_at here.
- IMEXFilamentPickerPopover leaked a top-level window per ghost click:
wxPopupTransientWindow::Dismiss() only hides, and never reaches OnDismiss().
Destroy from an OnDismiss() override and dismiss the picker through
DismissAndNotify(), which is the path a successful pick takes.
- ArrangeJob read PartPlate's IMEX zone cache from the worker thread, where
a cache miss rebuilds GLModel members with no GL context current while the
GUI thread may be painting them. Snapshot the zones in prepare(), on the
main thread, already converted to plate-local coordinates.
- The mode grid anchored its row window to the Primary's gantry row. A window
as tall as the grid can only start at row 0, so this drew tiles for tools
that do not exist and hid real ones. Render the whole grid instead; a
Primary outside it is a data problem the zone layout already reports.
- Build the mode tooltip from one format string rather than two catalog
fragments concatenated around a runtime value, so translators can move the
mode name within the sentence, and register IMEXModesCtrl.cpp for string
extraction.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
wxMediaCtrl2 was never instantiated on any platform (USE_WX_MEDIA_CTRL_2
is 0 everywhere); wxMediaCtrl3 replaced it. Delete wxMediaCtrl2.cpp/h,
drop them from the Win/Linux source list and the gettext list.txt, and
collapse the preprocessor-dead #if USE_WX_MEDIA_CTRL_2 gate in
MediaPlayCtrl.h.
Co-Authored-By: Claude <noreply@anthropic.com>
The .pot, the Italian .po and list.txt are build product: 27,314 of the added
lines in this branch were regenerated catalogues rather than code, and a reviewer
running git diff --shortstat met that number before anything else. Restored to
the merge-base so their diff is zero; they regenerate from source with
scripts/run_gettext.sh whenever the maintainers want them refreshed.
The Romanian catalogue goes with them, for a different reason: it is a complete
new translation and deserves its own PR rather than riding along inside a CAD
feature, where nobody qualified to review it would think to look.
Nothing here changes what the Design tab does. The strings are still marked for
translation in the sources; only the generated catalogues are out.
DesignPanel.cpp was never listed in localization/i18n/list.txt, and xgettext
extracts only what that file names. All 934 of the Design tab's _L() calls
were therefore invisible to every translator in every language — not merely
untranslated, unextractable. Adding the one line is the actual fix; the rest
follows from it.
Regenerating the .pot brings the catalogue from 6007 to 6536 msgids. 549 of
the new ones are now translated into Italian: 5230 to 5779 translated
messages. Verified no existing work was destroyed — every msgid that survived
into the new .pot kept its translation, and the 36 that lost one are genuinely
gone from the sources. msgfmt --check-format passes, which matters here
because a large share of these carry %d / %s / %zu.
CAD terms follow Italian CAD convention rather than literal glosses: Fillet ->
Raccordo, Chamfer -> Smusso, Draft -> Sformo, Rib -> Nervatura, Mate ->
Accoppiamento, Shell -> Svuotamento, Pattern -> Serie, Sheet body -> Corpo
superficie. Strings identical in both languages are deliberately left
untranslated so gettext falls back to the msgid.
The long mixed-filament / Local-Z dithering tooltips are left untranslated on
purpose: slicer internals, outside a Design i18n task, and untranslated before
this commit too.
One string changed rather than translated. The Coord Sys hint read "Without an
edge the frame's rotation about its normal follows world X, not the body" —
that described the defect fixed in 1726e93760, so it was a lie as of that
commit. It now says X comes from the face's first edge.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Update fix model
* updated
* List missing files
* Orca Slicer to OrcaSlicer
* Revert "Orca Slicer to OrcaSlicer"
This reverts commit 711d796e05c4eaaa7579280f83f6ecd555fe3560.
* Only update date if a change was made
* Gcodewriter messages
* #13432 update
* Update OrcaSlicer_it.po
SoftFever