* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
Update Snapmaker U1 (0.4 nozzle).json
Updated Snapmaker U1 0.4 nozzle "change_filament_gcode" and "machine_end_gcode" to fix the issue of collisions when using "Print by Object"
PR #13388 added resources/printers/N6.json for X2D support but did not
bump resources/printers/version.txt. PresetUpdater only copies files
from the install's resources/printers/ to the user's data_dir/printers/
when the resources version is newer than the user's stored version, so
every existing install stays at 02.00.00.29 and never receives N6.json.
At runtime, json_diff::load_compatible_settings("N6", "") reads from
data_dir/printers/N6.json; the silent file-missing failure leaves
is_support_bed_leveling, is_support_pa_calibration, and
SupportCalibrationNozzleOffset at their defaults, hiding the Bed
Leveling and Nozzle Offset Calibration checkboxes in the Send Print
Job dialog for the X2D.
Bumping the patch version triggers the existing propagation logic on
next startup.
Fixes#13780Fixes#13794
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* initial commit
* fix upper bounds for assemblies
* significantly less Z shift issues, still not quite tamped down yet though
* add instrumentation to logs
* finally found the issue
* update printer defaults
fix: OK/Cancel buttons clipped in Flushing Volume dialog (#13511)
The WipingDialog renders its UI inside a wxWebView. When the dialog
was clamped to screen size (many filaments, small displays, high DPI),
the HTML content exceeded the WebView bounds and the OK/Cancel buttons
fell below the visible area.
HTML fix:
- Convert .container to flexbox column with overflow-y: auto
- Pin .button-container with flex-shrink: 0 so it stays visible
- Allow .scroll-container to flex-grow for the table area
C++ fix:
- Replace heuristic extra_size with accurate fixed_overhead estimate
- Use correct cell height (25 DIP) matching HTML table row height
- Add screen margin for window decorations
- Enforce minimum dialog size when clamped
Co-authored-by: SoftFever <softfeverever@gmail.com>
* clean up UI elements
* further cleaning
* final cleanup for first round of settings UI streamlining
* update generic belt printer settings
* fix generic again
Reconciles the belt-printer branch with upstream PRs through #13723. Six
files had conflicts; three additional files needed manual follow-up fixes
where the auto-merge produced code that referenced upstream-renamed fields
or changed function signatures.
Notable reconciliations:
- TreeSupport.cpp: kept belt-floor early-exit branches around HEAD's
drop-down logic, folded upstream's `(distance_to_top > 0 ? 1 : 0)`
formula into the non-belt-floor path (upstream PR #11812). Dropped dead
`roof_enabled`/`force_tip_to_roof` locals.
- TreeSupport3D.cpp: combined upstream's safety-offset + remove_small
changes with HEAD's belt-floor clip in the per-slice trim loop. Dropped
HEAD's `else` block (superseded by upstream's rewritten bottom-contact
propagation) and re-added the belt-floor clip into the new propagation
loop. Gated the propagation on belt printers to prevent OOM when
belt-floor clipping produces empty initial slices.
- TriangleSelector.{cpp,hpp}: merged both new `select_patch` parameters
(HEAD's `up_direction` and upstream's `select_partially`); body uses
`dot(up_direction)` for the overhang angle check and forwards
`select_partially` to `select_triangle`.
- SupportMaterial.cpp: `slicing_params.soluble_interface` →
`zero_gap_interface_bottom` in HEAD's `detect_belt_floor_bottom_contacts`,
matching upstream's same-purpose rename at line 2495.
- Custom.json, GCodeWriter.cpp: simple additive merges (kept entries /
includes from both sides).
Verified by building OrcaSlicer (RelWithDebInfo) after a full deps
rebuild (Eigen v5.0.1, libigl v2.6.0 are now managed deps) and slicing
a scaled Benchy on the NORMALIZER belt-printer profile without OOM.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Expose Antialiasing velues
Expose Antialiasing multipliers.
Default to 4 as current implementation but enables the user to disable it to improve performante or increase sampling to improve quality.
* FXAA
* Improve descriptions
* Require restart when MSAA setting changes
Detect changes to the OpenGL MSAA (multisample anti-aliasing) preference when opening Preferences and prompt the user to restart the application to apply the change. Adds a constant key for the MSAA setting, stores the previous value, checks for changes (similar to the existing FXAA handling), and shows a warning dialog explaining the restart will close the current project without saving. If the user accepts, recreate_GUI is invoked to apply the MSAA change immediately.
* Revert "Require restart when MSAA setting changes"
This reverts commit dde134d346c3849598c91d025d2faed1b51c8a22.
* Menu and FPS options
* Fix FPS limiter and remove VSYNC
* Grouped FPS settings and mode up rigth fps counter
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Support file uploads and the device details page for CC2 printers.
* Resolved build issues for Linux and macOS.
* 1. Added `ElegooPrinterWebViewHandler` to handle WebUI messages for Elegoo printers. Other printers will keep the current behavior.
2. Added a static `get_print_host_webui` method in `PrintHost` to retrieve the printer WebUI URL.
* Improved timeout handling for CC2 file upload and SN info APIs.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* bbl device selector search box
* align file and more menus with its button
* fix multiline inputbox border color on windows
* fix multiline inputbox border color on windows
* preferences: use content width on combobox dropdowns
* about: match version text size on macOS
* msg dialog improvements
* fix canvas menu overlapping with sliced plates toolbar
* bbl bind dialog button placement
* bbl color picker
* Update StepMeshDialog.cpp
* drop file dialog
* drop dialog revert fonts
* revert windows multiline border
* Update StepMeshDialog.cpp
* update
* Flushing Volumes: match style of combobox
* fix hyperlink color on canvas notifications
* fix possible issues with shared profiles notification
Enable air filtration support in affected system printer profiles
Some system printer profiles that support air filtration had the feature
incorrectly disabled in the printer settings.
This caused the related filament settings to be hidden, making the feature
unavailable to users even though it is supported by the printer.
Enable "support_air_filtration" in affected system printer profiles and
bump profile version thus forcing Orca to refresh cached settings.
This ensures air filtration settings are visible and usable on printers
that support the feature.
* [Fix] Anycubic machine print profiles fix-patch
default_material changed. Wrong referenced Material deleted. No filament profile available.
* Anycubic Kobra X profile
These are the files for a new printer profile in OrcaSlicer for Anycubic Kobra X
Tested on Ubuntu 26.04 LTS.
Local Build = passed
OrcaSlicer Profile Validator = passed
Python Profile Validation Script = passed
* Rename resources/profiles/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json
correcct folder
* Rename resources/profiles/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename 0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json to process0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic/process0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic Kobra X.json to resources/profiles/Anycubic/machine/Anycubic Kobra X.json
* Rename resources/profiles/Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic Kobra X_buildplate_model-test.stl to resources/profiles/Anycubic/Anycubic Kobra X_buildplate_model-test.stl
* Rename resources/profiles/Anycubic Kobra X_buildplate_texture-test.svg to resources/profiles/Anycubic/Anycubic Kobra X_buildplate_texture-test.svg
* Rename resources/profiles/Anycubic Kobra X_cover.png to resources/profiles/Anycubic/Anycubic Kobra X_cover.png
* Rename resources/profiles/Anycubic ABS @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic ASA @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PVA @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PVA @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Generic PETG @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json
* Delete resources/profiles/Anycubic/Anycubic Kobra X_buildplate_texture-test.svg
wrong file
* Delete resources/profiles/Anycubic/Anycubic Kobra X_buildplate_model-test.stl
wrong file
* corrected Files
correct files uploaded (buildplate).
missing file was included (hotned)
* Delete resources/profiles/Anet directory
No profiles found for vendor: Anet at OrcaSlicer/resources/profiles/Anet.json
* Delete resources/profiles/Anycubic.json
Replaced
* Replaced
Replaced after running: python3 ./orca_filament_lib.py --fix --force
* Space indentation correction via script
Space indentation correction via script
* Space indentation correct via script
Indentation Check Failed
python3 ./scripts/orca_filament_lib.py --fix --force
* Space indentation corrected via script
Indentation Check Failed
python3 ./scripts/orca_filament_lib.py --fix --force
* Tab correction
* Tab correction
* Tab correction
* Tab correction
* fix format
* Anet restore
* Create Anet A8 Plus 0.4 nozzle.json
* restored Anet
* Delete resources/profiles/Anet/machine directory
the Anet profile is corrupted
* Create Anet A8 Plus.json
* machine
* Rename resources/profiles/Anet/Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/machine/Anet A8 Plus 0.4 nozzle.json
corect folder
* Filament
* Rename resources/profiles/Anet/Anycubic Generic ABS @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic ABS @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic ASA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic ASA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PA-CF @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PA-CF @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PC @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PC @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PETG @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PETG @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PLA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PLA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PLA-CF @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PLA-CF @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PVA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PVA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic TPU @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic TPU @Anet A8 Plus 0.4 nozzle.json
* process
* Rename resources/profiles/Anet/0.15mm Optimal @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/process/0.15mm Optimal @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/0.20mm Standard @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/process/0.20mm Standard @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/0.30mm Draft @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/process/0.30mm Draft @Anet A8 Plus 0.4 nozzle.json
* Delete resources/profiles/Anet/machine directory
* Delete resources/profiles/Anet/filament directory
* Delete resources/profiles/Anet/process directory
* restore
* Rename resources/profiles/Anet/Anet A8 Plus.json to resources/profiles/Anet/machine/Anet A8 Plus.json
* restore
* restore
* Delete resources/profiles/Anet/machine/Anet A8 Plus.json
* Changed to original OrcaSlicer profile
My modified printer profiles were overwritten by the original OrcaSlicer profiles. This reversed the changes made under “default_materials.” As a result, 47 errors appear when running the “Python Profile Validation Script”!
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* K2 Plus: add print area bounding box for adaptive bed mesh
The K2 firmware reads MINX/MINY/MAXX/MAXY gcode comments to
determine the adaptive bed mesh area. Without these, it falls
back to full bed mesh even when calibration is enabled.
K2 Pro also reads these comments (its profiles already had them).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* K2: add print area bounding box for adaptive bed mesh
Same change as K2 Plus — prepend MINX/MINY/MAXX/MAXY gcode comments
so firmware can determine the adaptive bed mesh area.
K2 Pro already had these.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* Creality: bump profile version to 02.03.02.72
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---------
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add Cubicon xCeler-Mini printer model and material profiles
- Add xCeler-Mini machine configuration and 0.4mm nozzle profile
- Add filament profiles for all Cubicon materials (PLA, PLA+, PLAi21, ABS, ABSk, ABS-A100, PETG, PC, PA-CF) for xCeler-Mini
- Add default process profile for xCeler-Mini 0.4mm nozzle
- Add xCeler-Mini cover image
- Update Cubicon.json to register xCeler-Mini machine, filaments, process, and machine list
- Update PA-CF and PLA base filament profiles (filament_max_volumetric_speed adjustment)
- Fix missed per-machine filament and process profiles for xCeler-I and xCeler-Plus
* fix format
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fixed PrintConfig.hpp order so Repetier outputs, updated ConfigWizard to use gcode_flavor value rather than static
Add Repetier to enum values and labels
Update to add Repetier base profile to the setup wizard
Re-order gcode_flavors in PrintConfig.hpp and PrintConfig.cpp to match
Revise ConfigWizard.cpp to use gcode_flavor rather than list order
Add Repetier profiles and include in custom.json (profile disables m73 and stop emit machine limits which Repetier doesn't use)
* Fix JSON formatting in Custom.json
* Add support for pressure advance in Repetier flavor
* Add Repetier flavor show motion ability tab is visible
* Refactor jerk handling for Repetier flavor
* Update resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update resources/profiles/Custom/machine/fdm_repetier_common.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* add back localisation flag for Klipper
* tidy up indentation and braces
* Space indentation for Repetier profiles changed to tab
* Fix space indentation in Custom.json file for Repetier profiles
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Conflicts resolved in src/libslic3r/GCode.cpp and src/slic3r/GUI/GUI_Factories.cpp.
GCode.cpp: combined upstream's air-filtration per-extruder gating
(activate_air_filtration_during_print / _on_completion), the new
extrusion-role-change gcode lambda, ZAA's path.z_contoured arc-fit
disable, raft-aware slow_down_layers branch, and Vec3d/Line3 ZAA
plumbing with the local belt-printer changes (path_on_first_layer,
effective_layer_index_for_point, should_disable_arc_fitting). All
auto-merged m_writer.X() calls converted to m_writer->X() to match
the local unique_ptr<GCodeWriter> refactor.
GUI_Factories.cpp: inserted brim_flow_ratio in the Support category
list and renumbered around the local build_plate_tilt_x/y entries.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Disable arc fitting by default on BBL P2S
* Update BBL P2S printer profile
* bump the version so that it automatically update the cache
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
