* Added Elegoolink connection
* Set Elegoo CC default bed to btPTE
* Friendly output of some error codes of PrintHost
* feat: Add elegoo centauri carbon profile
* fix: Fix the issue where the bed type in the printer configuration does not match the bed temperature settings when multiple bed types are not supported.
* feat: Modify the elegoo process parameters to disable slowdown_for_curled_perimeters.
* feat: Update comment to clarify plate visibility for multi bed support, BBL printer, and selected bed type.
* fix: Optimize ElegooLink upload; The code is clearer than before.
* feat: Format the ElegooPrintHostSendDialog code.
* fix: Remove the unnecessary instantiation attribute in the Elegoo process.
* fix: Flatpak compilation failed
---------
Co-authored-by: anjis <anjis.zhou@elegoo.com>
* Additional control over bridges
* Label updates
* Detect and handle layers over external bridges
* Label updates
* To-Do placeholders
* Filter out small external bridges
* Apply safety offset for internal bridge polygon intersections
* code comments
* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)
* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.
* Fixing bugs
* Convert tick boxes to drop down menu
* Additional geometry checks for second internal bridge to ensure no small polygons are left over.
* Minor code refactor for clarity
* Further refinements in polygon logic
* Polygon logic refinements pt3
* Further union operations to ensure clean geometry
* Fix compile error
* Clean up constructors
* Only create bridges on stInternalSolid areas, not sparse infill.
* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks
* Revert change to only consider stInternalSolid areas for second internal bridge layer.
This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill
* Updated beta statements and tooltip changes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
PROBLEM
• Current color palette has many repeating or very similar colors
• Colors looks came from 80s and all raw colors like rgb(0,255,255)
• Black and White colors shows less details on surfaces due to shadows
and highlights
SOLUTION
• Picked more specific color tones. Tried to make every alternative to
easily identifiable
• Didnt used black, white or gray
QUESTIONABLE
• New colors follows given order and i used orca color as first. Maybe
orange one is better pick
• I can add, remove, or change order of colors
COMPARISON
before
after
old color set
new color set
as text if you want to experiment
`
wxColour("#00C1AE"),
wxColour("#F4E2C1"),
wxColour("#ED1C24"),
wxColour("#00FF7F"),
wxColour("#F26722"),
wxColour("#FFEB31"),
wxColour("#7841CE"),
wxColour("#115877"),
wxColour("#ED1E79"),
wxColour("#2EBDEF"),
wxColour("#345B2F"),
wxColour("#800080"),
wxColour("#FA8173"),
wxColour("#800000"),
wxColour("#F7B763"),
wxColour("#A4C41E"),
`
* FIX:update custom_texture when new_shape=false
Jira: STUDIO-5287
Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9
(cherry picked from commit 9ce7de10f4)
* FIX: correct the bed model to the print area origin point
Change-Id: Ieb856dff421d39694966e3c13c519f4ffa3da5c2
(cherry picked from commit 32892514ff)
* Avoid unnecessary copy of `position` parameter
* Merge branch 'main' into bugfox/plater-y
* WIP:only works after saving and then reloading
* working version of move plate to the front
* added icons for move to front
* removed a commented line
* fixed the move to front function to behave correctly with undo/redo actions
* Merge branch 'main' into feature/move_plate_to_the_front
* Added `duplicate plate` feature.
This the initial commit and this still needs work.
* [#2025] Fixed the SEGFAULT, apparently an icon id=6 needed to be updated to id=7 as we have one more plate icon.
[#2025] Removed the `printf` statements.
* [#2025] Plate duplication is now fully implemented.
* [#2025] Updated icons for plate duplicate funcctionality.
* [#2025] Added toolbar icon fro "Duplicate Current Plate" action.
* [#2025] Revert changes for `toolbar_add_plate_dark.svg`.
* [#2025] Removed the `BBS` label in the code that is not written by BBS.
* [#2025] Updated `.gitignore` to ignore VSCode workspace file.
* [#2025] Fixed the instances not transforming in global space when the plate is duplicated.
* [#2025] Removed the Duplicate Plate action from the plate actions and the toolbar.
* [#2025] Added the `Duplicate Current Plate` functionality to the `Edit` menu.
* [#2025] Addressed review comments.
* [#2025] Addressed review comments.
* [#2025] Removed unused icons related to the previously introduced "Duplicate Plate" functionality.
* update flow rate calibration tests
* more tweaks
* add YOLO linear flow rate calibration
* update name
* revert line_width changes
* Make it 2mm thick and change some text
* Update YOLO test:
Normal YOLO for 0.01 step
Perfectionist YOLO for 0.005 step
* add space
* Fix linux deps debug build
* Use the same DL_CACHE for release build when building debug version of deps on Linux.
This prevents downloading the same source packages twice, and avoid downloading again after deleting the build dir.
* Fix debug build
* Fix warnings "loop variable creates a copy from type" and "loop variable binds to a temporary constructed from type"
* Use more readable data types for storing triangle splitting information.
* fix build errors
* SPE-2063: Determine correctly which extruders are used when the object is painted by the multi-material painting gizmo.
During the serialization of TriangleSelector and also during reading serialized painting data from 3MF, we cache all used states in the painted triangle mesh.
Based on this information, we can quickly determine which extruders are used and which don't.
* Fixed an bug that filament list was not updated properly
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Flushing volumes button background color for active state
* Sliced plates bar > Use different colors on plate numbers for light / dark theme
* Remove 3D navigator background
* Device & Project Tab > Sidebar > Selected tab background color
* Merge branch 'SoftFever:main' into color-fixes-3
* Correct sidebar button color for light mode for bbl monitor / calibration and project page
* Homepage fixes
* Fix parameters group title color too bright on dark theme
* Search popup hovered item background color
* Sidebar > Search box > match border color with other input/combo boxes
* fix indents
* Add descriptions to statecolors
* Paint gizmos > remove background of non active Tool / Brush buttons on dark mode
* Merge branch 'SoftFever:main' into color-fixes-3
* Top bar / Main tab bar button hover background
* Fix broken color change from last merges
* Gizmos selected text background
* Keyboard shortcuts window selected tab bg color
* About page link color
* Project page fixes
* match disabled text color on combo boxes with input boxes
* Use better background color for disabled elements on dark mode
* match all colors for disabled elements
* BBL > Monitor tab > Add printer text and icon not visible on dark theme
* even darker bg color for homepage thumbnails
* Sidebar arrow not visible
* Better bg color for row highlighting
* match style of gizmo combo box
* Merge branch 'SoftFever:main' into color-fixes-3
* Revert changes for main tab bar background color of button while hover
