GCode::extrude_support declared its per-path speed helper as a function-local
static lambda that captures `this` by reference. The closure is built once, on
the first extrude_support call, and reused for the rest of the process, so a
second G-code export in the same process runs the helper against a `this` from
the first export's stack frame, which has already returned.
The stale `this` flows through NOZZLE_CONFIG(...) -> cur_extruder_index() ->
GCodeWriter::filament(), reading a garbage current-extruder id and indexing
with it. It is silent whenever the reused stack still holds a usable pointer,
and an order-dependent SIGSEGV otherwise; AddressSanitizer reports it as a
stack-use-after-return in GCodeWriter::filament(). It is the only static
capturing lambda in libslic3r.
Drop static so the closure is rebuilt each call against the live frame. Add an
fff_print regression test that slices a support object twice in one process; it
fails without the fix (stack-use-after-return under ASan) and passes with it.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
* fix: prevent out-of-bounds crash in Arachne beading interpolation
SkeletalTrapezoidation::interpolate() derives an inset index from `left` but
uses it to index the merged beading, which follows the thicker of left/right.
When the thicker side has fewer insets, the index runs past the end and the
slicer crashes during "Generating walls".
Skip the adjustment when the index is out of range, as the adjacent guards
already do. interpolate() uses no instance state, so make it static and add a
regression test that exercises it directly.
Fixes#14584
feat: add regex_replace() string transform to filename templates
The filename template language could test strings (=~, !~, one_of) but
never rewrite one, so there was no supported way to reshape a placeholder
value, such as dropping a file extension from {first_object_name}.
Add regex_replace(subject, /pattern/, replacement), reusing the existing
regex-literal syntax and boost::regex engine. Every placeholder keeps
returning its exact value and the template does the transform explicitly:
{regex_replace(first_object_name, /\.[^.]*$/, "")} strip any extension
The replacement may reference capture groups ($1, $2, ...). It is one
grammar function mirroring digits(), with the name registered as a keyword
so it is not parsed as a variable.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
{input_filename_base} is meant to be the saved project's file name. Before
#13753 a bug made it fall back to the first object's name when a project was
saved; #13753 fixed it to use the project name. Some users relied on the old
behavior to get the part name into their output file name and had no
placeholder to recover it ({model_name} is the 3mf designer metadata, blank
for plain STL imports).
Add {first_object_name} as a dedicated placeholder for the first printable
object on the current plate, populated in update_object_placeholders()
independently of {input_filename_base}.
Closes#14493
* Support accessing `coFloatsOrPercents` values in gcode template (OrcaSlicer/OrcaSlicer#14522)
* Vector option values are separated by comma
* Fix wrong cast used for checking nullability
WipeTowerIntegration::append_tcr processed filament_end_gcode with only
layer_num in its placeholder config, so a filament_end_gcode referencing
{layer_z} could not be evaluated and slicing aborted. This affects any
multi-filament print that routes tool changes through the prime/wipe tower
(for example a support filament on a Bambu printer); the same macro works
in machine_end_gcode and on the non-wipe-tower set_extruder path, which
both define layer_z.
Set layer_z to tcr.print_z, the value this function already provides to its
change_filament_gcode and tcr_rotated_gcode placeholders.
Fixes#10119
CalibPressureAdvancePattern::line_width_first_layer() returned the raw
initial_layer_line_width, so a value of 0 (which means "use the default")
fed 0 into the Flow spacing math and threw FlowErrorNegativeSpacing,
crashing the whole app when slicing a PA pattern calibration.
Mirror the guard already present in the sibling line_width(): when the
configured width is non-positive, fall back to auto_extrusion_width.
Add a libslic3r regression test covering the width resolution.
Fixes#13188
* validator: detect duplicate filament subtype per printer (opt-in)
A filament is matched from the AMS by (filament_id + printer compatibility);
if two compatible filament presets for one printer share a filament_id, the
match is ambiguous and the runtime silently picks whichever loads first.
Add PresetBundle::check_duplicate_filament_subtypes(), gated behind a new
has_errors(check_duplicate_filament_subtypes) parameter and the validator's
-f/--check_filament_subtypes flag (off by default). For each system printer it
groups its vendor's compatible filament presets by filament_id and errors on
any group of 2+, reporting each preset as a clickable file:// URI with a single
"how to fix" hint. CI runs it for BBL only (-v BBL -f) until the other vendors'
profiles are cleaned up.
* profiles: fix ambiguous BBL filament matches
Resolve the duplicate-filament-subtype errors flagged by the validator:
- align compatible_printers with Bambu Studio where Orca over-claimed a nozzle
that already has a dedicated preset (Bambu PLA Basic/Matte/ABS @BBL H2DP;
Bambu ASA/PETG HF @BBL H2DP 0.6 nozzle; Fiberon PETG-ESD @BBL X1)
- fix a copy-pasted printer name in Overture Matte PLA @BBL A1M 0.2 nozzle
- fix a wrong inherits in Panchroma PLA Silk @BBL X1C 0.2 nozzle (was inheriting
Panchroma PLA @base, giving it filament_id GFPM001 instead of GFPM004)
Bump BBL profile version.
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
SoftFever