Ian Bassi
7c91459c37
Emit Disable Power Loss Recovery ( #11616 )
...
* Emit Disable Power Loss Recovery
Now only works if it's enabled but the goal it's to force disable it.
With this change it will always emit the command for BBL or Marlin 2.
Co-Authored-By: Michael Rook <54159303+michaelr0@users.noreply.github.com >
* Refactor power loss recovery G-code comments
* Return empty power loss recovery when no compatible printer
* Update power loss recovery comments
Update label and tooltip for power loss recovery
* Add enum for power loss recovery mode
Refactored power loss recovery configuration to use a new PowerLossRecoveryMode enum instead of a boolean. Updated GCodeWriter and related logic to handle the new enum, allowing for 'printer_configuration', 'enable', and 'disable' options. Updated config handling, legacy value conversion, and default values accordingly.
* Update PrintConfig.cpp
---------
Co-authored-by: Michael Rook <54159303+michaelr0@users.noreply.github.com >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-12-31 00:16:47 +08:00
Kiss Lorand
f9d5519294
Scale emulated spiral Z-hop segments based on slicing resolution ( #11556 )
...
Spiral Z-Hop resolution
Use slicing resolution to determine segment count for emulated spiral Z-hop
What’s changed
The number of linear segments used to approximate a spiral Z-hop is now derived from the PrintConfig resolution value.
The segment count is clamped to a safe range (4–24) to avoid excessive G-code generation or MCU queue overflow.
Why
Previously a fixed 24 segments were always used, regardless of model resolution.
For small-radius spiral lifts this was excessive and could overwhelm some printers.
Adapting segment count to resolution ensures smooth motion where needed, but lighter G-code where possible.
Details
m_resolution is now stored via apply_print_config().
_spiral_travel_to_z() uses this value to compute segment count dynamically.
Only the linear-segment fallback path is affected; G2/G3 arc-fitting remains unchanged.
2025-12-18 12:30:41 +00:00
Michael Rook
5c547ea4a1
Add ability to disable Power Loss Recovery on BBL machines ( #11582 )
...
* Add ability to disable Power Loss Recovery
* Fix typo in PrintConfig.hpp for power loss recovery
* Attempt to resolve Unknown option exception: disable_power_less_recovery
Add disable_power_loss_recovery property to any json which had scan_first_layer
* Revert "Attempt to resolve Unknown option exception: disable_power_less_recovery"
This reverts commit ddaf34b317michael@rook.id.au >
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-12-10 23:19:57 +08:00
Kiss Lorand
855870e256
Fix emulated spiral Z-hop XY offset on multi-plate slicing ( #11468 )
2025-11-25 11:23:37 +08:00
Kiss Lorand
f48a438b27
Fix Spiral Z-Hop arc handling ( #11430 )
2025-11-22 22:09:29 +08:00
Noisyfox
5e2a7fbf35
Merge branch 'main' into dev/p2s-pr
2025-11-17 14:56:09 +08:00
Ian Bassi
4b1ddcdc55
Url update: SoftFever/OrcaSlicer -> OrcaSlicer/OrcaSlicer ( #11371 )
...
* SoftFever/OrcaSlicer -> OrcaSlicer/OrcaSlicer
* Revert for deps
2025-11-17 11:17:54 +08:00
xun.zhang
21399999f1
ENH: add eager lift function
...
1.Immediate do lift in eager_lift function
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I931d22e901e2123bb886c31d8d1a5788fddeed42
(cherry picked from commit 6cea772d4f3b2f7e2a43c35a2271e4bdbba9eadd)
2025-11-14 11:08:08 +08:00
Noisyfox
3b1a420b4e
Merge remote-tracking branch 'upstream/main' into dev/h2d-2
2025-10-20 09:37:23 +08:00
Ian Bassi
d786aec255
Input Shaping Calib: Types, RepRap + Improvements ( #10913 )
...
* IS Freq duplicated as Base
* IS jerk to 5
* JD jerk to 0
* Base 1 layer + MINIMUM_CRUISE_RATIO=0
* Tab
* Remove IS BASE
* Update Plater.cpp
* Klipper Jerk 5, Others 10
* JD in Marlin2
* Types
* Horizontal
* Different lists
* RepRap IS writer
* Smart Flavors and axis
* RepRap values lowercase
* Hide Y axix for RepRap
* Max Jerk or JD
* Reorder
* Removed dual list + Default
* RepRap show UpperCase use LowerCase
* RepRap P"type" Type of input shaping to use, not case sensitive.
* RepRap DAA
* Reorder Klipper
* Custom Firmware Note
* Better Display
Co-Authored-By: yw4z <28517890+yw4z@users.noreply.github.com >
* Better notes
* Update + Clean Wiki
Co-Authored-By: gregmatic <60957555+gregmatic@users.noreply.github.com >
* Wiki Update
Update Images
Improve guide
Co-Authored-By: Cameron D <30559428+cdunn95@users.noreply.github.com >
* Fix G-code generation issue and refine input shaping calibration documentation
---------
Co-authored-by: yw4z <28517890+yw4z@users.noreply.github.com >
Co-authored-by: gregmatic <60957555+gregmatic@users.noreply.github.com >
Co-authored-by: Cameron D <30559428+cdunn95@users.noreply.github.com >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-10-20 00:31:51 +08:00
Noisyfox
580414265d
Merge remote-tracking branch 'upstream/main' into dev/h2d-2
...
# Conflicts:
# src/slic3r/GUI/Tab.cpp
2025-09-24 09:15:33 +08:00
SoftFever
b483dff617
Enhance GCode handling for Z-axis movements ( #10803 )
...
* Enhance GCode handling for Z-axis movements
- Updated `travel_to_z` method to include a `force` parameter, allowing forced Z movements.
- Modified GCode generation logic to ensure Z position is restored after unknown last positions.
- Enforce z restoreation after tool changer
* Improve filament_multitool_ramming logic
* fix indent
2025-09-21 22:03:54 +08:00
xun.zhang
66814d687e
FIX: get wrong value in retract params
...
1.Should get value by filament id instead of extruder id
2.Fix many other issues caused by incorrect usage
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I3278d7de0f8976a97c9e5ccef80bba4a58553f5a
(cherry picked from commit 30c51dd1171fc16ba778308745fab2eb246aedd0)
(cherry picked from commit e9027478f8948352d99d33519994b044ca18a65a)
2025-09-06 23:44:59 +08:00
qing.zhang
5fda94a53b
FIX: remove extra filament change
...
Jira: none
if the fist print filement as same as the filament be set on start gcode
not insert filment change
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I0114f287fff9be276a90772537d1910df18dec61
(cherry picked from commit 276c797faff1407b2c1606d4bfafe21773901001)
2025-08-24 23:18:13 +08:00
xun.zhang
aee14d307a
FIX: wrong flush logic
...
1.Fix flush calc logic
2.Rename m_extruder in GCodeWriter
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I38f023fbad983305632ca62cbfb3909759013c25
(cherry picked from commit f1b0805ed13eb94d6eb61e12330db3d628c0241b)
2025-08-24 23:18:05 +08:00
zhimin.zeng
8db3e3cd54
FIX: backend get the extruder id based on filament_map
...
Change-Id: Ib7679c0fc67336e462467dab9f5b4d4684d6eb19
(cherry picked from commit dcd9fd501354da33baea2adc0f645fabe8880cf1)
2025-08-24 23:18:02 +08:00
qing.zhang
cca85fe861
ENH: implement mult extruder params
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I906b106aa4c73272a418528db0e964d9130b0dd7
(cherry picked from commit 8af6f6d13b609b7ed5f25c3b36b966f533054d7b)
2025-08-24 23:18:01 +08:00
qing.zhang
bba00b2e7a
ENH: remove the appended T cmd after change filament
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: Id5da64626b7343a71dcb38c06f5b5caf43ec40e2
(cherry picked from commit 7da565f0582f470274d279e52daf0dd889f0de7d)
2025-08-24 23:18:00 +08:00
Rodrigo
8cdc9c02df
Junction Deviation Machine Limit ( #9234 )
...
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com >
2025-04-15 21:49:17 +08:00
Ian Bassi
822de5ce29
Input shaping & JunctionDeviatio wiki + improvements ( #9256 )
...
* VFA-Calibs Wiki images
* Calib Code Fixes
Improve Settings
JD Set Precision to 3
Change damp default
Recommend 0
Fixes
* IS JD Wiki
* Updated with 9234
* IS Verbose
2025-04-13 15:17:24 +08:00
Ian Bassi
a66bc06b2d
Klipper compatible
...
Klipper freq & damp test
Klipper guide separation from the Marlin guide
Co-Authored-By: Shane Delmore <shane@delmore.io >
2025-04-03 14:40:26 -03:00
Ian Bassi
428cba9a25
Juntion Deviation + Documentation
...
Junction Deviation Calibration Test
Base documentation
- VFA
- Input Shaping
- Junction Deviation
Co-Authored-By: Rodrigo <162915171+rf47@users.noreply.github.com >
2025-04-03 14:40:25 -03:00
Ian Bassi
1857849cba
Input Shaping Damping
...
Damping
Fix spanish comments
2025-04-03 13:59:07 -03:00
Ian Bassi
19dae83e40
Input Shaping Frequency
...
Input Shaping calibration based in https://marlinfw.org/docs/gcode/M593.html
2025-04-03 13:59:07 -03:00
Noisyfox
70d7768868
Fix crash when slicing batch PA pattern test ( #8786 )
...
* Fix crash when slicing batch PA pattern test (SoftFever/OrcaSlicer#8777 )
2025-03-10 21:35:44 +08:00
SoftFever
873a6f5c6e
Revert "Avoid collisions when moving Z down" ( #8478 )
...
Revert "Avoid collisions when moving Z down (#7208 )"
This reverts commit cf6d9c77ff
2025-02-21 18:01:34 +08:00
Fritz Webering
cf6d9c77ff
Avoid collisions when moving Z down ( #7208 )
...
Avoid collisions with previous extrusions in the same layer when moving Z down in an XYZ move.
This happens for example when starting a scarf joint after another perimeter was already printed.
Fixes SoftFever#7191
Co-authored-by: SoftFever <softfeverever@gmail.com >
2024-10-27 22:24:49 +08:00
SoftFever
608e6375e6
Fix wrong z when zhop is diabled.
2024-10-06 19:16:15 +08:00
Vovodroid
a4cfc14a7e
Jerk - per axis maximum limit ( #6252 )
...
* Jerk - per axis maximum limit
* Fixing Klipper and refactoring
* Remove unused variables
2024-08-07 22:41:09 +08:00
enricoturri1966
7d0fb4f42a
preheat work - part 1
2024-07-21 10:29:42 +08:00
Vovodroid
a13152c61f
Add travel_slope option ( #5873 )
...
* Add travel_slope option
* Merge branch 'main' into travel-slope-pr
2024-06-29 17:33:22 +08:00
Ioannis Giannakas
712c28251c
Updated wipe logic to respect retraction speed during wiping ( #3094 )
...
* Wipe retraction adjusted based on available wipe distance and retraction speed
* Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option.
* Wipe improvements: Spelling & grammar
* Revert "Wipe improvements: Spelling & grammar"
This reverts commit c8f8612b3fba515ffb62
2023-12-16 13:54:03 +00:00
Noisyfox
a6c927d87f
Add option to disable emitting M73 gcode ( #2114 ) ( #2940 )
2023-12-03 09:36:27 +08:00
SoftFever
df0a49a73d
Fix retraction issues
2023-11-09 20:54:33 +08:00
SoftFever
eed0c28bd8
fix some small issues of machine_max_acceleration_travel
2023-10-27 21:09:31 +08:00
SoftFever
7a2229cae9
Optimize g-code generation for Klipper: combine accel and jerk command
2023-10-24 00:11:33 +08:00
Ocraftyone
f84e94faf7
Add "Manual filament change" option and logic ( #2379 )
...
* Add "Manual filament change" option and logic
* make suggested changes
* make suggested changes
* change tag from "CHANGE_TOOL" to "MANUAL_TOOL_CHANGE"
* some tweaks
* More fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com >
2023-10-22 19:31:09 +08:00
SoftFever
90601c098a
Feat: chamber temp control and chamber fan ( #2483 )
...
* init
* tweak
2023-10-22 16:38:20 +08:00
SoftFever
b8172316b8
Merge branch 'v1.7.2-remote'
...
Signed-off-by: SoftFever <softfeverever@gmail.com >
# Conflicts:
# deps/ZLIB/ZLIB.cmake
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/ko/OrcaSlicer_ko.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/calib/PressureAdvance/pa_pattern.3mf
# resources/handy_models/Disc.stl
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/ko/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/BBL.json
# resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json
# resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json
# resources/profiles/BBL/filament/Bambu PA-CF @base.json
# resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json
# resources/profiles/BBL/filament/Bambu PA6-CF @base.json
# resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json
# resources/profiles/BBL/filament/Bambu Support W @BBL X1.json
# resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json
# resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json
# resources/profiles/BBL/filament/Generic PA-CF.json
# resources/profiles/BBL/filament/Generic PC.json
# resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json
# resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json
# resources/profiles/BBL/filament/Generic PLA-CF.json
# resources/profiles/BBL/filament/Generic PLA.json
# resources/profiles/BBL/filament/Generic TPU.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json
# resources/profiles/BBL/filament/Overture Matte PLA @base.json
# resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture PLA @BBL P1P.json
# resources/profiles/BBL/filament/Overture PLA @BBL X1.json
# resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture PLA @BBL X1C.json
# resources/profiles/BBL/filament/Overture PLA @base.json
# resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json
# resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json
# resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json
# resources/profiles/BBL/filament/PolyLite ABS @base.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json
# resources/profiles/BBL/filament/PolyLite ASA @base.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json
# resources/profiles/BBL/filament/PolyLite PETG @base.json
# resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json
# resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json
# resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json
# resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
# resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
# resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json
# resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json
# resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json
# resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json
# resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json
# resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json
# resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json
# resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json
# resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json
# resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json
# resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json
# resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json
# resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json
# resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json
# resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json
# resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json
# resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json
# resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json
# resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.2 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.6 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.8 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.2 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.6 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.8 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Tronxy.json
# resources/profiles/Tronxy/machine/Tronxy X5SA 400 0.4 nozzle.json
# resources/profiles/Tronxy/process/0.08mm Extra Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Tronxy/process/0.28mm Extra Draft @Tronxy.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/web/data/text.js
# src/OrcaSlicer.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode/SeamPlacer.cpp
# src/libslic3r/GCode/SeamPlacer.hpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Preset.cpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/calib.cpp
# src/libslic3r/calib.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
# src/slic3r/GUI/BedShapeDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/GUI.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/OptionsGroup.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/AMSControl.hpp
# version.inc
2023-09-29 19:46:49 +08:00
xun.zhang
9b20cad55e
ENH: add support for chamber_temp and exhaust_fan
...
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
2023-09-22 16:21:26 +08:00
wenjie.guo
c97a88069b
NEW: Z hop restriction
...
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com >
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
2023-09-22 16:21:26 +08:00
SoftFever
5269e3a2cd
small tweaks
2023-09-09 17:47:25 +08:00
SoftFever
33ac24d35a
Support Marlin 2
2023-08-30 23:39:00 +08:00
SoftFever
b636be8852
mk4 profiles
2023-08-27 23:37:43 +08:00
SoftFever
2a478ab4f9
post changes after merging BS1.7.4
...
Remove tracking etc..
2023-08-26 18:45:43 +08:00
salt.wei
766abf92fa
ENH: add back use_relative_e for third party printer
...
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
2023-07-07 17:29:08 +08:00
salt.wei
2fe7629388
ENH: normalize comment from OrcaSlicer
...
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
2023-07-07 17:29:08 +08:00
qing.zhang
346321379a
ENH: add decel para
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I95a1240c8d6ce7365055e840e526f279a55939e4
2023-07-07 17:29:08 +08:00
qing.zhang
aa62c6e870
ENH: add jerk parameter
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I6aadbffebc069167a460c991aa8fb711b754ff37
2023-07-07 17:29:08 +08:00
salt.wei
8905121af5
ENH: sync voron profile from orca
...
Thanks OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I02f6b712cc07907ae7cae4284fb75ddef053dfea
2023-07-07 17:29:08 +08:00
