* bugfix for TPU filament overrides
* higher voluemetric flow
* bugfix for to high speed at internal solid infill
* Update Prusa.json
* updated firmware check and nozzle settings
* bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle
* variables not defined in orcaslicer
* bug fix volumetric speed, wrong value
* added high flow base process
* added highflow base process
* added first full draft of high flow profiles, further tests are necessary
* changed 0.35mm to 0.32mm for 0.6mm nozzle
* minor changes to initial layer speeds
* changed 0.35mm to 0.32mm for 0.6mm nozzle
* furcer changes on accelartion and speed
* added 0.35mm Standard @MK3.5 again for not breaking anythin for current users
* Update 0.35mm Standard @MK3.5.json
forgot to set the layer_height after creation of the 0.35mm profile
* minor fixes in filament overrides
* added profiles for high flow nozzles on the Prusa MINIIS
* added fan_speedup_time for MINIIS and MK3.5
* changes to support interface, pattern and distance
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
* changed default to inner-outer-inner wall
inner-outer-inner gives pretty good overhangs with better surface
* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer
* profiles for different nozzles sizes, better speed settings
* initial layer height was wrong
* wrong initial layer height
* set the correct accelerations
* changed firmware version number
* using pressure advance UI setting instead of custom filament g-code
* Update Prusa Generic PC.json
* Update Prusa Generic PC.json
* changed max flow for PC
* added PVA filament profiles
* bug fix in filament loading
* changed line width according to prusa slicer
* changed heatbed temperature for Minis capabilities
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
