* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6b.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com>
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
These will not compile on STL builds of wxWidgets. I assume that on
the non-STL variants, the first argument is cast to a boolean,
which might be a bug…
This removes the dependency on legacy wxWidgets configurations,
and makes OrcaSlicer compile on STL builds.
Also, the wxStringList class has been obsolete for at least 20
years, and disappeared from the documentation.
Replace with wxArrayString.
* Organic supports: Added check for variable layer height, with which
Organic supports are not compatible.
Fixes prusa3d/PrusaSlicer#9528 and similar.
Check the object max Z against build volume Z in Print::validate().
Cherry-picked from prusa3d/PrusaSlicer@5b94971
* Fix crash with default tree support
* Show "support_critical_regions_only" only when using auto normal tree supports (#2195)
* Fix organic tree check
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
1. sometimes the pipe open failed,
add some retry logic;
2. return the reason when no-check=1 while validate fail;
3. return an error when duplicate object under spiral-mode when not using
by-object print sequence
JIRA: MAK-xxxx
Change-Id: I3792d89dbbe560a8febe0f0154bccb8f573959a5
Including brim_max in bed shrink will make available area of bed be
small when an object has tree support, because this object will have
a brim_width as large as 24mm now.
Jira: MAK-2048
Change-Id: I309c0ec14e4acd75dcfc2fff0e7ea3558b43cc4c
Sending the printing window, several printing options are displayed in the wrong position
Jira: STUDIO-4045
Change-Id: I5bf5b4295b015020eb38273ed13193d74f43c65d
It is difficult to distinguish between blank and empty thumbnails, so adding a diagonal line on the empty disk indicates empty
JIRA:STUDIO-4515
Change-Id: I46038c9256fc43927976b82f29ea895ce907d247
We decide to set brim width of all objects to MAX_BRANCH_RADIUS_FIRST_LAYER if there is an object with tree support after discussion.
Jira: MAK-2009
Change-Id: I4c4940800632c433235966b01c44ac910e33a51c
1. the best object pos of A1 mini is [0.7,0.5] of bed.
2. dominant direction is more accurate (solve the problem that cubes are
not arranged neatly).
Jira: STUDIO-4356
Change-Id: I8931f51a97bee96d5d9e75306481eae2e0cdc059
This causes the printer setting page unable to display becase I added a
coPoint type option best_object_pos.
Add reading and writing coPoint type configs solves the problem.
Jira: STUDIO-4303
Change-Id: I34e40e567236d28ab1a7be265128275191fcc935
1. Add align_to_y_axis option for auto-arrange.
This is useful for auto-arranging of i3 type printers.
2. Change default value of align_to_origin to true when switching
from non-i3 printers to i3 printers.
JIRA: STUDIO-2583
Change-Id: I7dabab846022a0da030a9fec060a60a4207537a0
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
Increase the brim width to the max full diameter of tree supports.
Jira: MAK-2009
Change-Id: If44da7107f79eddccca42a54484806269e3fee5c
(cherry picked from commit 8a60e8787d7be1ad147edb78eca7f2259a27927b)
JIRA: STUDIO-3921
fix the orientation bug that multiple objects does not perform the same
increase num of hull faces to iterate
Change-Id: I9c662e1e7858521585de612d7f1e9cd213e183bb
(cherry picked from commit 7ce0ba3e037f9b2a6d420ab302913753f9ea7544)
