Jira: none
extrude 5 mm in place before drawing the pre-extrusion line
to ensure the filament stick to bed
add a dirty detection feature for carmera
support dual-head high-low temp check
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia365d99fe764acf4815d24cfb96532b6f1d79990
(cherry picked from commit d17f5586103e4b87c8ae875846253658afb6e42d)
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
(cherry picked from commit 16813aa46092343c70681f3145a4f402ff415042)
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
(cherry picked from commit 5c3d804b9fbe65532d2717e60b5f1143710b0ecf)
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
(cherry picked from commit fff787345625a0031934e609b1b3709e39decd4a)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
recover the y position when timelapse gcode end
jira:none
Change-Id: I80b9b65395722e0190aa7d50bb064e095d8ec09d
(cherry picked from commit db5e28ddaa1d4d7c58888d817dd77c176556e106)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
