Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
* Initial profile for TwoTrees SK1
* Added PAUSE command instead of M601 and added machine_pause_gcode
* Enabled multi bed types and removed skirt loop
* Fixed non-ascii characters
* Added PETG, PLA-CF plus clean ups and fixes.
* Optimizations, and added PLA Silk
* Maximum velocity is too high on Klipper settings, lowered to 730mm/s, this was obtained with Klipper Auto Speed
* Ditto
* Small optimizations
* Added one layer to bottom for HSpeed profile
* Add files via upload
First working version of TwoTrees SP-5 running klipper. this can be the base to start using this slicer. most of the generic materials are OOTB ones and this profile is made for near stock printers just running klipper. roughtly running a max speed of 200mm/s and runs successfully
* Add files via upload
* Delete SP-5.png
