* BASE
* precise wall and z moved
* PolyHoles
* Arc-fitting
* X-Y Compensation
* Elephant foot + moved images
* Update quality_settings_precision.md
* Wall generator and more
* Full Reorder
* TPMS-D bases
* Update strength_settings_infill.md
* Image Fix + Infill desc calculator
* Descriptions + image fix
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Update cornering-calib.md
* minor fixes
* Wip updated
* Missing fills
* Update infill_desc_calculator.xlsx
* Update infill_desc_calculator.xlsx
* Update infill documentation and images
Removed outdated 'iso' infill images and updated 'top' infill images with new versions. Added new images for adaptive cubic and 2D honeycomb infill patterns. Updated strength_settings_infill.md to revise infill strength values, descriptions, and remove references to deleted images. Introduced documentation for 2D honeycomb infill and made minor corrections and clarifications throughout.
* Revise infill pattern documentation and add comparison table
Updated strength_settings_infill.md to clarify infill density calculation, add a comprehensive comparison table of infill patterns, and standardize terminology for strength and print time. Expanded pattern descriptions to use qualitative strength ratings instead of numeric values. Updated infill_desc_calculator.xlsx to reflect these changes.
* Indentation in code examples
Adjusted the indentation of code blocks in the cornering calibration documentation for clarity and consistency with the rest of the document.
* Update 3D Honeycomb infill strength ratings
Adjusted the horizontal strength rating for 3D Honeycomb infill from 'Normal' to 'Normal-High' in the strength settings documentation and table. Updated the infill_desc_calculator.xlsx file to reflect these changes.
* Formatting and fix in ERS documentation
Updated headings to use consistent Markdown syntax, improved clarity in explanations, and reworded references for better readability.
* Fix wall generator doc link and filename
Updated the Home.md to reference the correct 'quality_settings_wall_generator' section and renamed the corresponding documentation file for consistency.
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Clipper: Verify range of int32 coordinates on input.
Cherry-picked from prusa3d/PrusaSlicer@fa7debf49d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Optimized PointInPolygon() to calculate cross products
with int64s instead of doubles.
Cherry-picked from prusa3d/PrusaSlicer@9dca8403fe
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Reworked the ClipperLib / Polygon types to use
the tbb::scallable_allocator to better scale on multiple threads.
Cherry-picked from prusa3d/PrusaSlicer@9cde96993e
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* use tbb::scallable_allocator for Polygons and ExPolygon::holes
to better scale on multiple threads
Cherry-picked from prusa3d/PrusaSlicer@b67ad6434d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed compilation on GCC and CLang
Cherry-picked from prusa3d/PrusaSlicer@b3b44681a9
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Remove clipper2 which is not used
* Removed shiny profiler from clipperlib
Cherry-picked from prusa3d/PrusaSlicer@7e77048593
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Further optimization of memory allocation using scalable_allocator.
ClipperLib: SimplifyPolygon() - changed default winding number to positive,
added strictly_simple parameter.
ClipperUtlis simplify_polygons() - removed "remove_collinear" parameter
Cherry-picked from prusa3d/PrusaSlicer@a7e17df25f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: emplace_back() instead of push_back().
Cherry-picked from prusa3d/PrusaSlicer@2e150795b1
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed issue in a 32bit clipper, where IntersectPoint() checked for
the Y coordinate of the calculated intersection point for validity,
but the Y coordinate was already rounded to 32bits, thus an overflow
may have in rare cases masked invalidity of the result.
Cherry-picked from prusa3d/PrusaSlicer@b39c33414f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed Vojtech's out of boundary assert in Clipper library.
Cherry-picked from prusa3d/PrusaSlicer@0a202dcff3
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Update clipper to 6.4.2.
Cherry-picked from prusa3d/PrusaSlicer@b8b3cccb40
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Try fix cmake opencv
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Fix punctuation of enumerations
* Add missing '?' at the end of questions on hints
* Add periods after error messages
* Add punctuation to all tooltips
* Add missing periods on the pt-BR translation
* remove OSMesa
OSMesa is depricated for quite a while and got removed with Mesa 25.1.0
* remove OSMesa from all buildfiles, readmes, etc…
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Add new Bambu RIB wall feature, including only the rib wall generation algorithm.
* Fix Linux compilation errors.
* Attempt to fix flatpak build
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* fixes and refactors linux build scripts
- build_linux.sh: fixes wrong AppImage build folder; refactors script; enhances help text
- harmonizes names: BuildLinux.sh and BuildLinuxImage.sh
- fixes file permissions: cmake inherits .in-file permission; removes chmod 755 in scripts
- linux.d/debian: removes false positive error message
- updates documentation
* enables ANSI-colored output for GNU or Clang
* build_linux.sh: adds -p flag to disable PCH for boosting ccache hit rate
* Allow compilation on distributions based on Ubuntu/Debian (#8625)
* build_linux.sh: takes over changes from BuildLinux.sh
* CMakeLists.txt: removes leftovers, enables ANSI-colored output
* CMakeLists.txt: fixes issue where FORCE_COLORED_OUTPUT was not respected form environment (introduces -C cli arg)
* merges 5df4275: Make it easy to pass extra build args to deps and orca in BuildLinux.sh (#9648)
* init
* update dialog buttons
* Fix color on Linux & macOS
* Fix dark mode dialog title color on Windows
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Replace prusa printer images with standard sizes and aspect ratio
* Rename Prusa Mini IS to specify the IS in the name
* Add missing prusa CORE One in the preset dialog and reorder prusa printers
* updated pictures to 320px
JIRA: STUDIO-none
Change-Id: I3bb7b209962c15e94ef24d24f752e8cdafc42975
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit d5f9b35b911aabc0bf3683744f980838934f5bf7)
(cherry picked from commit 499b0d8e4f2295dd07a5d84e4917e04a404efd53)
