* Change G-Code
* Change config to closely match prusa profile
The profile can be found at https://forum.prusa3d.com/forum/prusaslicer/looking-for-a-dremel-3d45-profile-for-prusa-slicer-help-me-help-my-students/
* Use original build plate model
* Change printable area
* Update machine settings
* Change bed model naming
* Prevent future conflicts
* Update values
* Fix error
* Disable firmware retraction
* Enable reduce infill retraction
* Fully disable relative e distances
* Fix filename format
* Revert "Fix filename format"
This reverts commit b95e76a57a.
* Forgot this one
* Clean up
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
* changed default to inner-outer-inner wall
inner-outer-inner gives pretty good overhangs with better surface
* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer
* profiles for different nozzles sizes, better speed settings
* initial layer height was wrong
* wrong initial layer height
* set the correct accelerations
* changed firmware version number
* using pressure advance UI setting instead of custom filament g-code
* Update Prusa Generic PC.json
* Update Prusa Generic PC.json
* changed max flow for PC
* added PVA filament profiles
* bug fix in filament loading
* changed line width according to prusa slicer
* changed heatbed temperature for Minis capabilities
* set default support to snug
* changed default filament setting to the correct value
* changed line with to the correct values according to prusaslicer profiles
* Update Prusa MINIIS 0.4 nozzle.json
updated firmware version
* updated firmware version
* changed first layer height according to optimal value of the respective nozzle size
* changed wall loops to 2 for bigger nozzles
* Update fdm_filament_abs.json
Modification based on chamber temperature
* Update fdm_filament_asa.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json
Modification based on chamber temperature
* Update QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json
Modification based on chamber temperature
* Update Qidi Generic ABS.json
Modification based on chamber temperature
* Update Qidi Generic ASA.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json
Sorry, there is still a parameter that needs to be modified for this type of consumable
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json
Sorry, there is still a parameter that needs to be modified for this type of consumable
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json
Sorry, there is still a parameter that needs to be modified for this type of consumable
* Update Qidi Q1 Pro 0.4 nozzle.json
Parameter modification
* Update fdm_qidi_x3_common.json
Parameter modification
* Update Qidi Q1 Pro 0.4 nozzle.json
Gcode Change
* Update fdm_qidi_x3_common.json
Gcode Change
* Merge branch 'main' into main
fixes includes:
1. 0.6 and 0.8 nozzles are not displayed
2. Some filaments are not enabled for 0.6 0.8 nozzle
3. version number
4. change default sparse_infill_pattern to crosshatch
5. change top_surface_pattern to monotonicline
Fixes InfimechTx Start Gcode
- Current start gcode for InfimechTx has the wrong index for Y when creating the purge line
- Updated start gcode to use right index for the Y value
* Update fdm_filament_abs.json
Modification based on chamber temperature
* Update fdm_filament_asa.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json
Modification based on chamber temperature
* Update QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json
Modification based on chamber temperature
* Update Qidi Generic ABS.json
Modification based on chamber temperature
* Update Qidi Generic ASA.json
Modification based on chamber temperature
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
* Replace M109 S[material_print_temperature_layer_0] with M109 S[first_layer_temperature]
* Change line width to match nozzle
* Change line_width for Ender-3 S1 Plus
* Update creality_cr10se_buildplate_model.stl
* Change line width to match nozzle size (Ender3v3SE)
* Fix Ender-3 S1 Plus 0.8 bed size
* Enable Z-hop for Ender-3 S1 Plus
* Trying something
* Update creality_ender3s1plus_buildplate_model.stl
* Fix CR-10 SE print size
* Various Flying Bear fixes
* Try fixing error
* Revert "Try fixing error"
This reverts commit e42e016e4a.
* Add minor Ender-3 V3 KE improvements
* Maybe this will fix the error?
* Revert "Maybe this will fix the error?"
This reverts commit 5e7873251b.
* Revert "Various Flying Bear fixes"
This reverts commit babca572dc.
* Fix CR-10 SE G-Code
Recommended by @bkonosky
* Minor changes to Ender-3 V3 KE
* Probe when bed is heated (Ender-3 V3 KE)
* Minor changes to Ender-3 V3 KE
* Fix oozing (Ende-3 V3 KE)
* Change retraction settings
* Use different retraction settings
* Revert "Use different retraction settings"
This reverts commit 854decf848.
* try this
* Remove "role_based_wipe_speed": "0",
* Add changes from CR-10 SE Config #4966
* Add "role_based_wipe_speed" : "0",
* Up retraction speed
* Missed this
* Resolve merge conflicts
* Resolve merge conflicts
* Change retraction & wipe speed
* Revert line removal
* Change wipe_speed to 200mm/s
* Forgot the 0.16mm
* Add BED_MESH_CALIBRATE PROBE_COUNT=6,6
* Improve for Matte PLA
* Compensate for fan speed
* Fix CANCEL_PRINT bug
* Move SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 to start g-code
* Disable infill combination for 0.2 & 0.24
* Fix end G-Code
* Disable arc fitting
This fixes the merge conflict
* temp
* Revert "temp"
This reverts commit 4bbc028ade.
