artillerylab
f3e486c1a9
Update printer profiles for Artillery ( #11284 )
...
* Update printer profiles for Artillery
* Revert "Update printer profiles for Artillery"
This reverts commit 5dc7083089
2025-11-25 13:27:35 +00:00
SoftFever
4f50fdc94e
Fixed many profile issues and cleaned up some messes. ( #10686 )
2025-09-11 17:50:53 +08:00
Pierre Poissinger
7dfce56fbb
Imported Artillery M1 Pro profiles from ArtilleryStudio ( #10383 )
...
* Imported Artillery M1 Pro profiles from ArtilleryStudio
* Removed duplicate overhang_fan_speed - keeping 90 as other profiles
* Replace by octo/klipper as it seems Artillery made a custom host_type on ArtilleryStudio...
* Changed sparse_infill_pattern to gyroid for M1 profile, as suggested
2025-08-24 00:42:20 +08:00
Christian Muehlhaeuser
7c650c16f8
Update Artillery Genius & Sidewinder profiles ( #8673 )
...
* Update Artillery Genius & Sidewinder profiles
- Fixed bed-size of Genius (Pro) profile.
- Fixed default retraction values for the Artillery Genius (Pro) 0.4 profile,
which were set too high for this direct-drive machine.
- Slightly increased default retraction value for Sidewinder X1 & X2, to match
the Genius profiles. Tested values on all machines.
- Matching minimum layer height for Genius & Sidewinder profiles.
- Fixed line endings & indentation.
2025-03-07 19:18:00 +08:00
artillery3dlab
265bc8453c
Artillery Resources Profiles Update ( #6754 )
...
* Artillery proflies update
* Artillery Resources Profiles Update
---------
Co-authored-by: chenyipeng <1192633120@qq.com >
2024-09-16 22:13:19 +08:00
artillery3dlab
364d91bd56
Artillery proflies update ( #6457 )
...
* Artillery proflies update
2024-08-18 11:37:11 +08:00
artillery3dlab
03180bbde7
Add Artillery's new machine config ( #6068 )
...
* Add Artillery's new machine config
* Merge branch 'main' into master
* Merge branch 'main' into master
2024-07-11 23:51:38 +08:00
cochcoder
5dfc624e11
Fix excessive maximum z accelleration for Artillery Sidewinder X1 ( #4733 )
...
Bring max z acceleration to 100 from 1000
2024-03-27 22:04:44 +08:00
Mr-PBH
c8f4895373
Add Artillery Genius Pro Profile ( #3742 )
...
* add photos required for genius pro
* add genius pro
* add genius pro
* add genius pro
* added genius pro, changed bed temp to 60c, nozzle temp 200c
* add genius pro, changed bed temp 60c, nozzle temp 200c
* add genius pro
* add genius pro and 0.4mm nozzle
* elafant foot to 0.15mm, 2 walls
* add genius pro print settings
* add genius pro paths
2024-01-27 11:45:17 +08:00
SoftFever
e624632969
semm
2023-09-09 13:19:59 +08:00
SoftFever
afdd753db7
tweak profiles
2023-08-03 00:47:48 +08:00
fr3ak2402
37e105c1e8
Improvement Artillery Sidewinder X2 Profile & other small changes ( #1053 )
...
* Add & revise FLSun Profile
FLSun Q5
FLSun QQ-S Pro
* Patch Artillery Sidewinder X2 profile
revision speed parameters
revision start & end code
* change Anycubic 4Max Pro image
* Adjustments to the profile of the Anycubic 4Max Pro
Preparation for adding more Anycubic printers
* add more Anycubic profiles
2023-05-14 09:18:02 +08:00
fr3ak2402
507db8c301
add more printer profiles ( #1038 )
...
* Delete SW-x2.png
* Add Artillery Sidewinder X1 profile
* add Elegoo Neptune profile
* Update Elegoo Neptune 2S 0.4 nozzle.json
* Change start code parameters
2023-05-12 18:45:14 +08:00
SoftFever
08a94681ca
minor change: use [bed_temperature_initial_layer_single] instead of [hot_plate_temp_initial_layer] for some profiles
2023-05-10 22:48:12 +08:00
fr3ak2402
93eff233d5
Adds printer profile for Artillery printers ( #923 )
...
* Adding the Qidi X-Plus
Qidi X-Plus profile
Qidi X-Plus image
* Revision of the pressure plate model
Qidi X-Plus
* Add Artillery Profiles
Artillery Genius
Artillery Hornet
2023-05-03 21:11:10 +08:00
SoftFever
162f7d2ac3
optimized hot end model
2023-04-24 18:04:47 +08:00
SoftFever
2e5c648be7
set z hop type to Normal by default
2023-03-29 23:38:08 +08:00
GP3D
7c6418e323
Artillery Sidewinder X2 ( #84 )
...
* Fixed deps "directory not found"
* Added Artillery Sidewinder X2
* typo
* forgotten rename
Co-authored-by: GiaPag <120025021+GiaPag@users.noreply.github.com >
2023-01-03 10:02:32 +08:00
